2. Baxton Studio
  3. RH317B-Grey/Dark Brown-BS

Baxton Studio RH317B-Grey/Dark Brown-BS, RH317B-Grey/Walnut-BS, RH317B-Sand/Dark Brown-BS Assembly Instructions

  • Hello! I've reviewed the Assembly Instruction for the 317P Chair. This document provides a detailed step-by-step guide including parts list, cautions and diagrams to help you assemble the chair. I'm ready to answer any questions you have about the assembly process or the components mentioned in the document.
  • What should I do before starting the assembly?
    What is the caution about tightening the nuts or screws?
    What should I do with the hardware parts while assembling?
ASSEMBLY INSTRUCTION MODEL : 317P
Read this instruction carefully. Remove all wrapping material, staples and straps from the carton. See
hardware and furniture part list
For guidance. Be sure you have all wooden furniture parts on a clean and flat soft surface, such as a
carpet or rug, to prevent from being scratched.Follow the figure to start assembling.
CAUTION :
1. Do not FULLY - TIGHTEN the nut or screw untill all is ready to assemble.
2. Do not OVER - TIGHTEN the nut or screw to avoid causing damages to the thread.
3. Keep all hardware part out reach of children.
DESRIPTIONNO QTY
1JCBC SCREW M6 X 50MM 6 PCS
2
3
4
SPRNG WASHER M6 6 PCS
6M4 ALLEN KEY 1 PC
COMPELETE ASSEMBLE
PART LISTNO QTY
ABACK REST
BFRONT LEG
CSIDE RAIL 2 PCS
DCUSHION SEAT 1 PC
1 PC
1 PC
ESRETCHER 2 PCS
CSK SCREW M4 x 38MM 4 PCS
WOOD DOWEL Ø8 x 30MM 4 PCS
5
CSK SCREW M4 x 30MM 3 PCS
Silver Aluminium
/