Sunricher SR-2818WiN-RF User manual

Type
User manual

This manual is also suitable for

Sunricher SR-2818WiN-RF is a WiFi-RF converter that allows you to control RF devices using your iOS or Android smartphone or tablet. With this device, you can remotely turn on/off, dim, and change the color of your lights, as well as control other RF devices such as fans and curtains.

The SR-2818WiN-RF is easy to install and use. Simply connect the converter to your home WiFi network and then download the free "Easylighting" or "Easyhome" app to your smartphone or tablet.

Once you have the app installed, you can create scenes and schedules to automate your lighting and other devices. For example, you can create a scene that turns on your lights at sunset and dims them at bedtime. You can also create a schedule that turns on your fan in the morning and turns it off at night.

Sunricher SR-2818WiN-RF is a WiFi-RF converter that allows you to control RF devices using your iOS or Android smartphone or tablet. With this device, you can remotely turn on/off, dim, and change the color of your lights, as well as control other RF devices such as fans and curtains.

The SR-2818WiN-RF is easy to install and use. Simply connect the converter to your home WiFi network and then download the free "Easylighting" or "Easyhome" app to your smartphone or tablet.

Once you have the app installed, you can create scenes and schedules to automate your lighting and other devices. For example, you can create a scene that turns on your lights at sunset and dims them at bedtime. You can also create a schedule that turns on your fan in the morning and turns it off at night.

WiFi Converter 09.288WN.04158
Wiring diagram
12V DC power input
Method 1:Connect your cell phone with your home net router(WiFi-RF)
Function introduction
Important: Read All Instructions Prior to Installation
Output RF signal
Operation Frequency 2.4G
Operating temperature 0-40°C
Relative humidity 8% to 80%
Dimensions 110x85x24.2mm
• The convertor works with RF receiver series to be controlled by IOS or Android system via WIFI.
• Waterproof grade: IP20
Product Data
DO NOT install with power applied to device.
DO NOT expose the device to moisture.
Safety & Warnings
Power Supply 12VDC
Green LED indicator:
Power normal
Red LED indicator:
Under control
Blue LED indicator:
WiFi connected
Ethernet
12V DC power
input
Router
Lear nin g Key
RF LED Rec ei ve r
Method 2:Connect your cell phone with the converter(WiFi -RF)
12V DC power
input
Lear nin g Key
RF LED Rec ei ve r
Lear nin g Key
RF LED Rec ei ve r
Reset
Switch
41 mm
WiFi Reset switch: press and
hold down for 10S then release,
the blue WiFi indicator will go
off and go on again, WiFi setting
will be factory reset.
Note: When the hub
is configured to home router,
use the button to reset WiFi
setting to enable to control
directly through the hub
network again.
Operation
1. This WiFi-RF converter can be controlled by both “Easylighting” and
Easyhome” apps, please choose either of them to control.
2.For “Easylighting” app, download application from ‘app store’ or
google play’ by searching ‘easylighting’ or scanning following QR codes.
3. For “Easyhome” app, download application from ‘app store or
google play’ by searching ‘Easy Home - Smart Home.
4.If the converter has connected with router, then connect your cell phone
to your router network.If the converter did not connect with router, then
connect your cell phone to the converter network directly. (Password:0123456789)
5. Open the easylighting/easyhome application and operate according the application manual.
Andriod IOS
  • Page 1 1
  • Page 2 2

Sunricher SR-2818WiN-RF User manual

Type
User manual
This manual is also suitable for

Sunricher SR-2818WiN-RF is a WiFi-RF converter that allows you to control RF devices using your iOS or Android smartphone or tablet. With this device, you can remotely turn on/off, dim, and change the color of your lights, as well as control other RF devices such as fans and curtains.

The SR-2818WiN-RF is easy to install and use. Simply connect the converter to your home WiFi network and then download the free "Easylighting" or "Easyhome" app to your smartphone or tablet.

Once you have the app installed, you can create scenes and schedules to automate your lighting and other devices. For example, you can create a scene that turns on your lights at sunset and dims them at bedtime. You can also create a schedule that turns on your fan in the morning and turns it off at night.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI