RF + WiFi SPI Controller

Power Supply

Constant Voltage

Size

Picture Function introduction

Waterproof grade: IP20 Radio Frequency : 868mhz

RF

remote

2. Delete the pairing:

2.1. Wire up the RF receiver correctly, power on

2.2. Hold the “ RF Code Key” button on receiver over 3 seconds until the connected led light on receiver flickers

twice, means well deleted.

With digital IC LED lights

SPI Signal

0.2A max

Output

Using instruction with IOS or android system

Please check ‘Easylighting’ application manual. WiFi password:0123456789

Cellphone

Master/Slave jumper

Reset switch

RF SPI Cont roller