Tascam IF-FW/DM MKII is a 32-channel audio interface that uses a single FireWire cable to connect to a computer. It is compatible with TASCAM’s DM-3200 and DM-4800 digital consoles, turning them into the ultimate front-end for computer workstation recording. The card supports resolutions up to 96 kHz/24 bit without changing the incredible 32-in/32-out channel count.
With the IF-FW/DM MKII, you can use your DM-3200 or DM-4800 as the control center for your studio, bypassing the need for expensive audio interfaces.
Tascam IF-FW/DM MKII is a 32-channel audio interface that uses a single FireWire cable to connect to a computer. It is compatible with TASCAM’s DM-3200 and DM-4800 digital consoles, turning them into the ultimate front-end for computer workstation recording. The card supports resolutions up to 96 kHz/24 bit without changing the incredible 32-in/32-out channel count.
With the IF-FW/DM MKII, you can use your DM-3200 or DM-4800 as the control center for your studio, bypassing the need for expensive audio interfaces.
Tascam IF-FW/DM MKII is a 32-channel audio interface that uses a single FireWire cable to connect to a computer. It is compatible with TASCAM’s DM-3200 and DM-4800 digital consoles, turning them into the ultimate front-end for computer workstation recording. The card supports resolutions up to 96 kHz/24 bit without changing the incredible 32-in/32-out channel count.
With the IF-FW/DM MKII, you can use your DM-3200 or DM-4800 as the control center for your studio, bypassing the need for expensive audio interfaces.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI