2. meitav-tec
  3. CTU1601

meitav-tec CTU1601 Product information

  • Hello! I am an AI chatbot trained to assist you with the meitav-tec CTU1601 Product information. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
N L V1 X1 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8 V2 COM PO1 COM PO2 PO3 COM PO4 12378AO1 0AO2
DI1 T1 0T2 0T3 0AI1 0AI2 5VDC A B
ON
123456
78
ON
1234
Date:
Title:
No.Revision Date
Drawn: M.Ruchansky
Checked: S.Lukin
Approved: E.Roy
CTU1601
09.08.07 File: ctu1601(230v).vsd
Print name: PS-2600
230VAC
Fuse 8A
LED Power
Not in use
Communication cable
2x22AWG
Twisted, Shielded
Communication cable
2x22AWG
Twisted, Shielded
Not in use
DI1 0DI3 0DI2 DI5 0DI4 DI7 0DI6 DI8 12V
S1 (MAC Address) S2 Configuration
DIP Switch S2 - Configuration
S2.1 - Not in use
S2.2 - Not in use
S2.3 - Not in use
S2.4 - End of line Jumper
ON – with jumper
OFF – without jumper
*The drawing shows the default configuration.
ON
1234
Not in use
Important !
Disconnect power to the main board
before making any changes to DIP
switches/Jumpers and while wiring
the unit .
CTU1601
230VAC, 0.5A each
Normally open
DIP Switch S1
MAC Address
ON
87654321
Maxinet protocolMaxinet protocol
meitav-tec
Tel: +972-3-9626462
Fax: +972-3-9626620
e-mail: support@meitavtec.com
/