Symmons SLW3512BBZ0.5, SLW3512, SLW3512BBZPP, SLW3512BBZPP05, SLW3512MBPP Installation guide

  • Hello! I've reviewed the Operation and Maintenance Manual for the Symmons Lavatory Faucet Two Handle Widespread. This document provides instructions on product care, installation and tool requirements. I'm ready to assist you with any questions you might have about the faucet.
  • How do I clean the finished trim area?
    What should be used for uneven or porous surfaces?
    What tools are required?
    What should I do before assembling the tee to the spout?
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621
Copyright © 2022 Symmons Industries, Inc. symmons.com gethelp@symmons.com ZV-3580 REV 0 122022
Two Handle Widespread Lavatory Faucet
Operation and Maintenance Manual
Limited Lifetime - to the original end
purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.
Warranty
Tools Required:
Plumbers
Putty
Plug can be used to
pressure test rough in
Push in retainer on tee and
pull out tube for disassembly
For uneven or porous
surfaces use plumbers
putty or silicone
Note: Use engraved
line to set height.
Refer to spec sheet for
appropriate height.
1-3/8”
1-3/4
Note:
Use handle to set orientation of
valve body before securing.
Product Care:
Clean finished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and
then quickly rinse with water.
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621
Copyright © 2022 Symmons Industries, Inc. symmons.com gethelp@symmons.com ZV-3580 REV 0 122022
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Flush valves before assembly
of tee to the spout
Secure spout to rough-
in and move forward for
backsplash
For uneven or porous
surfaces use plumbers
putty or silicone
Alternate Installation Method
For Obstructed Backsplashes
Spout allen wrench: 3/32"
Handle allen wrench: 5/64"
/