Signature Hardware 425998 Installation guide

Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

Drill
1Oversized Rainfall Shower
OVERSIZED RAINFALL SHOWER
TOOLS AND MATERIALS:
Unpack and inspect the product for any
shipping damages. If you find damages, do
not install. Contact Customer Service at
1.866.855.2284. If you need assistance or
have questions while installing your shower
head contact Customer Service.
We recommend consulting a professional if
you are unfamiliar with installing bathroom
fixtures or plumbing. Signature Hardware
accepts no liability for any damage to the
ceiling or wall, or for personal injury during
installation.
BEFORE INSTALLING
Read the installation instructions. Observe all
local plumbing and building codes.
For the following installation instructions for
your new shower head it is assumed that any
old fixtures have been removed and all rough-in
work has been completed.
Marker
Screwdriver
Plumbers Tape
2Oversized Rainfall Shower
PARTS LIST
A x 1
D1 x 4
C x 4
B x 1
E x 4 F x 1
D2 x 4
3Oversized Rainfall Shower
INSTALLATION
According to the template (B) mark the location of the mounting holes . Use a drill with a
Ø6mm bit to drill mounting holes into studs or blocking.
Install the mounting brackets (C) with the tapping screws (D1). Thread the shower bars (E)
onto the mounting brackets, and the inlet hose (F) onto the water inlet.
D1
C
B
F
1
E
2
4Oversized Rainfall Shower
Attach the shower head (A) to the shower bars (E). Connect the inlet hose (F) to the shower
head.
The installation is complete.
E
A
F
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Signature Hardware 425998 Installation guide

Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI