Signature Hardware 425997 Installation guide

Signature Hardware

Brand: Signature Hardware

Model: 425997

Category: Sanitary ware

Type: Installation guide

This manual is also suitable for

425998

Drill

1Oversized Rainfall Shower

OVERSIZED RAINFALL SHOWER

TOOLS AND MATERIALS:

Unpack and inspect the product for any

shipping damages. If you ﬁnd damages, do

not install. Contact Customer Service at

1.866.855.2284. If you need assistance or

have questions while installing your shower

head contact Customer Service.

We recommend consulting a professional if

you are unfamiliar with installing bathroom

ﬁxtures or plumbing. Signature Hardware

accepts no liability for any damage to the

ceiling or wall, or for personal injury during

installation.

BEFORE INSTALLING

Read the installation instructions. Observe all

local plumbing and building codes.

For the following installation instructions for

your new shower head it is assumed that any

old ﬁxtures have been removed and all rough-in

work has been completed.

Marker

Screwdriver

Plumbers Tape

2Oversized Rainfall Shower

PARTS LIST

A x 1

D1 x 4

C x 4

B x 1

E x 4 F x 1

D2 x 4

3Oversized Rainfall Shower

INSTALLATION

According to the template (B) mark the location of the mounting holes ①. Use a drill with a

Ø6mm bit to drill mounting holes into studs or blocking.

Install the mounting brackets (C) with the tapping screws (D1). Thread the shower bars (E)

onto the mounting brackets, and the inlet hose (F) onto the water inlet.

D1

C

B

F

1

E

2

4Oversized Rainfall Shower

Attach the shower head (A) to the shower bars (E). Connect the inlet hose (F) to the shower

head.

The installation is complete.

E

A

F

1
2
3
4

Signature Hardware 425997 Installation guide

Signature Hardware

Brand: Signature Hardware

Model: 425997

Category: Sanitary ware

Type: Installation guide

This manual is also suitable for

425998

Related papers

Other documents