2. Continental Industries (CI)
  3. 0000-34-6034-97-pvc-end-cap

Continental Industries (CI) 0000-34-6034-97-pvc-end-cap Installation guide

  • Hello, I'm a chat assistant and I've reviewed the provided document which outlines the installation instructions for PVC end caps. The document covers how to verify the correct size and how to solvent weld them on PVC pipes. It is important to be sure that it meets the requirements of ASTM D 2513, with a pressure rating of 100 psig MAOP. Feel free to ask any questions you have about installing your end cap.
  • What verification should be done before using solvent end cap?
    What standard should be followed for solvent welding?
    What type of pipe is this end cap designed for?
    What is the pressure rating of this end cap?
The Ultimate Connection
CONTINENTAL INDUSTRIES
The Ultimate Connection
PVC END CAP INSTALLATION INSTRUCTIONS
1 Verify that the solvent end cap is the
correct size for the PVC pipe.
2.
For solvent welding, refer to ASTM D 2855.
34-6034-97
IMPORTANT
For use on:
PVC gas pipe meeting the requirements of ASTM D 2513
Pressure Rating: 100 psig MAOP
ECN 2620 REV "B" 07/23/14
/