IMPORTANT: Weatherproof your outdoor installation. Be sure to seal all holes in the enclosure, such as the mounting,
conduit, plugs, sensors, and photocontrols with silicone sealant.
Electrical Connections
0DNHHOHFWULFDOFRQQHFWLRQVSHUWiring Diagram)LJ
D&RQQHFWWKHOLQHIL[WXUHOHDGWRWKHEODFNVXSSO\OHDG
b. Connect the common fixture lead to the white supply lead.
c. Connect the ground lead from the service to the ground lead
coming from the driver plate.
Troubleshooting
If the unit does not turn “ON”:
&KHFNLQFRPLQJYROWDJHWRWKH/('GULYHU2QWKH6ZLWFK8QVZLWFKOLQHLWPXVWEHDPLQLPXPRI9$&DQGQR
JUHDWHUWKDQ9$&
$UHDOO/('VRQWKHOLJKWHQJLQH³2))´",IVRWKH/('GULYHUPD\EHGHIHFWLYH8VLQJDYROWPHWHUFKHFNWRVHHLIWKH
voltage is present at the output of the power supply. If low or no voltage is found, replace the power supply.
,IDQ\LQGLYLGXDO/('VDUH³2))´WKH/('OLJKWHQJLQHPD\EHGHIHFWLYH3OHDVHKDYHWKHVHULDOQXPEHURIIWKHOLJKW
engine available when you contact technical support.
Fig. 18 – Wiring Diagram
%ODFN/LQH
White Neutral
*UHHQ<HOORZ*UHHQ*URXQG
Wall Mount with Conduit Installation, Continued
7LJKWHQWKHVFUHZVWRVHFXUHWKHIL[WXUHFRYHU
WRWKHEDVH)LJ
Fig. 17
RWE Series
Installation Instructions
5(9 ZZZEDUURQOWJFRP