Windchaser CER163M User manual

Brand: Windchaser

Model: CER163M

Category: Space heaters

Type: User manual

Windchaser CER163M is a portable, powerful heater with several features that make it ideal for a variety of heating needs. With two heat settings (low and high) and a fan-only option, you can customize the heat output to your liking. The adjustable thermostat allows you to set the desired temperature, and the heater will automatically turn on and off to maintain that temperature. The overheat protection shut-off feature provides peace of mind, and the tip-over switch ensures that the heater will turn off if it is accidentally knocked over.

INSTRUCTION MANUAL

MODEL CER163M

PLEASE READ BEFORE USE AND SAVE

HEATER

Innovative Products for Living

WindChaser Products, Inc.

4130 Del Rey Avenue, Marina del Rey, CA 90292

Phone: 310-827-8615 Fax: 310-827-8566

Toll Free: 1-800-405-2943

www.windchaserproducts.com

WITH ROTARY CONTROLS

UTILITY

CERAMIC

HEATER

Thank you for choosing WindChaser

Products. Please read all

instructions before assembly and use. Please empty all items from

carton and save carton for future use. If you have any questions or

require assistance, please contact WindChaser customer service at:

www.windchaserproducts.com or 1-800-405-2943.

CONTENTS

MODEL

CER163M

Before Initial Use 2

For Your Safety 3

Operating Instructions 4

Maintenance Instructions 6

Limited Warranty 7

HEATER

WITH ROTARY CONTROLS

UTILITY

CERAMIC

LIMITED WARRANTY

Toll Free: 1-800-405-2943

WindChaser Products, Inc.

4130 Del Rey Avenue, Marina del Rey, CA 90292

Phone: 310-827-8615 Fax: 310-827-8566

www.windchaserproducts.com

Read this Entire Instruction Manual Before Use

For your reference:

Serial No. Date of Purchase

Name and Address of Dealer

BEFORE INITIAL USE

One (1) Year Limited Warranty

This 1 year warranty applies to repair or replacement if a product is

found to be defective in material or workmanship. This warranty does

not apply to any damage resulting from commercial, abusive and/or

unreasonable use or supplemental damage. Defects as a result of

normal wear and tear will not be considered manufacturing defects

under this warranty. Read the instruction manual before attempting to

use this product. WindChaser Products, Inc. is not liable for incidental

or consequential damages of any nature. Any implied warranty of

merchantability or fitness for a particular purpose on this product is

limited in duration to the duration of this warranty. Some states do not

allow the exclusion or limitation of incidental or consequential damages

or limitations on how long an implied warranty lasts, so the above

limitations or exclusions may not apply to you. This warranty gives you

specific legal rights, and you also may have other rights which vary from

state to state. This warranty applies only to the original purchaser of this

product. WindChaser Products, Inc. will repair or replace this product

if it is found to be defective in material and/or workmanship. Defective

product should be returned to the place of purchase in accordance with

store policy. Thereafter, while within the warranty period, any defective

product should be returned to WindChaser Products, Inc. This warranty

does not cover damage resulting from unauthorized attempts to repair

or from any use not in accordance with its manual. Return defective

product to WindChaser Products, Inc., 4130 Del Rey Avenue, Marina

del Rey, CA 90292, Attn: Consumer Service. Include proof of purchase,

name, address, and daytime phone number, freight prepaid with proof

of purchase and $10 for handling, return packing and shipping charges.

This warranty is valid only in the United States and Canada. Due to the

possibility of running design changes, the actual product may differ

slightly from the image on packaging.

BEFORE RETURNING DEFECTIVE PRODUCT,

CONTACT CUSTOMER SERVICE BY

E-MAIL (custserv@windchaserproducts.com)

OR PHONE.

Attach your purchase receipt here

PLEASE KEEP YOUR RECEIPT.

YOUR RECEIPT IS YOUR PROOF OF

PURCHASE AND IS NECESSARY FOR

WARRANTY SERVICE

MAINTENANCE INSTRUCTIONS

1. Always disconnect the cord from the electrical outlet when cleaning

the heater.

2. Accumulated dust may be removed from the heater by using a

vacuum cleaner or a can of compressed air. DO NOT OPEN THE

HEATER HOUSING. Spray air through the back and front grills with

the can of compressed air to loosen dust, then vacuum inside and

around the heater.

Note: A can of compressed air can be purchased at a local computer

store or any store that sells computer accessories

3. Wipe the exterior surfaces of the heater occasionally with a damp

cloth (not dripping wet), using a solution of mild detergent and water.

Dry the case thoroughly before operating the heater.

Caution: Do not allow water to run into the interior of the heater as this

could create a fire or electric shock hazard.

4. The fan motor is factory lubricated for life and will require no

further lubrication.

5. Store heater in a clean dry place when not in use.

6. Service must be performed by an authorized factory representative.

7. To prevent any damage to the cord when the unit is not in use,

please bundle the cord and secure to prevent damage.

Remember portable electric heaters are designed for spot heating or as

a supplementary heat source. They are not intended to be main sources

of heat during the normal heating season.

FOR YOUR SAFETY

IMPORTANT INSTRUCTIONS

WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD

ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK

AND INJURY TO PERSONS, INCLUDING THE FOLLOWING.

READ ALL INSTRUCTIONS BEFORE OPERATING THIS HEATER.

1) This heater is hot when in use. To avoid burns, do not let bare skin touch hot

surfaces. If provided, use handles when moving this heater. Keep combustible

materials, such as furniture, pillows, bedding, papers, clothes and curtains at least

3 feet (0.9m) from the front of this heater and away from the sides and rear.

2) Extreme caution is necessary when any heater is used near a child or physically

disabled person and whenever the heater is left operating unattended.

3) DO NOT LEAVE THE HEATER UNATTENDED WHEN IT IS IN OPERATION.

4) ALWAYS UNPLUG HEATER WHEN NOT IN USE.

5) Do not operate any heater with a damaged power cord or plug or after the heater

malfunctions or if it has been dropped or damaged in any manner. Return heater

to authorized service facility for examination, electrical or mechanical

adjustement, or repair.

6) Do not plug the unit into a loose fitting or worn out electrical outlet.

7) DO NOT USE OUTDOORS.

8) This heater is not intended for use in bathrooms, laundry areas or similar indoor

locations where there may be moisture. Never place heater where it may fall into

a bathtub or other water receptacle.

9) Do not run power cord under carpeting. Do not cover cord with throw rugs, runners

or the like. Arrange cord away from traffic area where it may be tripped over.

10) To disconnect heater, turn controls to off, then remove plug from outlet.

11) Do not insert or allow foreign objects to enter any ventilation or exhaust opening

as this may cause electric shock, fire or damage to the heater.

12) To prevent possible fire, do not block air intakes or exhaust openings in any

manner. Do not use on soft surfaces, like a bed, where openings may become

blocked.

13) A heater has hot, arcing or sparking parts inside. Do not use it in areas where

gasoline, paint or flammable liquids are used or stored.

14) Use this heater only as described in this manual. Any other use not recommended

by the manufacturer may cause fire, electric shock or injury to persons.

15) The heater is not intended for use with an extension cord. Plug the cord directly

into an appropriate wall receptacle. However, if an extension cord is needed, the

cord should be No. 14 AWG minimum size and rated no less than 1875W.

16) THIS PRODUCT IS EQUIPPED WITH A POLARIZED A.C. (Alternating Current)

PLUG — a plug having one prong wider than the other. This plug will fit into the

power outlet only one way. This is the safety feature. If you are unable to insert

the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,

contact an electrician to replace the obsolete outlet. DO NOT DEFEAT THE

SAFETY PURPOSE OF THIS POLARIZED PLUG.

SAVE THESE INSTRUCTIONS

MODEL CER163M

Pre-Operating Instructions

1. Carefully remove the heater from the box (PLEASE SAVE THE CARTON

FOR OFF-SEASON STORAGE).

2. Make sure the unit is in the OFF position before plugging the heater

into a polarized 120V AC, 60 cycle outlet. (Please use caution to avoid

overloading your circuit by NOT using other high wattage appliances in

the same outlet.)

3. Place the heater on a firm level surface.

Operating Instructions

Control Panel Functions (Fig.1)

Fan/Heat Dial:

To operate turn Thermostat Dial clockwise to the maximum setting, then turn the

Fan/Heat Dial to the desired setting.

OFF

FAN ( ): Cool air only

LOW HEAT (LO): 1000 watts of heat

HIGH HEAT (HI): 1500 watts of heat

CAUTION: FRONT GRILL IS HOT WHEN UNIT IS IN OPERATION.

Thermostat Dial

1. Set the thermostat to the highest setting by turning the dial clockwise

until it stops.

2. Turn the Fan/Heat Dial clockwise to (LO) or (HI) setting.

3. When the desired temperature comfort level is reached, lower the thermostat

setting until the fan/heater stops operating. This is done by moving the

thermostat control counter-clockwise toward the (FW) setting.

4. The thermostat will now automatically maintain the pre-set temperature level

by turning the heater on and off.

Note: Unit comes with an ANTI FROST function, that if a temperature of 40°F /

4°C is reached the unit will turn on..

Note: It is normal for the heater to cycle on and off as it maintains

the preset temperature. To prevent the unit from cycling, change the

thermostat setting.

Manual Oscillation: Hold the base, then twist from the handle either

left or right.

Red Power-On Indicator Light: (Fig. 2) Illuminates when heater is on.

OPERATING INSTRUCTIONS

Fig. 1 Control Panel Functions

Thermostat

Dial

Overheat Protection Shut-Off

When an overheat temperature is reached, the system will automatically shut

the heater off. It can only resume operation when the user resets the unit.

To reset the heater:

1. Turn the Fan/Heat Dial to the (OFF) setting.

2. Unplug the heater.

3. Check to make sure there are no objects obstructing

the airflow around the heater

4. After 5-10 minutes, plug the unit in again and operate normally.

Safety Tip-Over Switch

This heater is designed to automatically shut-off when tipped forward or

backward. When returned to its normal upright position, the heater will

automatically turn on again.

Fig. 2 Indicator Lights

Red Power-On Indicator Light

Fan/Heat Dial

OFF

HOT

Windchaser CER163M User manual

Brand: Windchaser

Model: CER163M

Category: Space heaters

Type: User manual

Download PDF

report

Windchaser CER163M User manual

Windchaser CER163M User manual

Related papers

Other documents