Axis T8705 Integration Manual

Brand: Axis

Model: T8705

Type: Integration Manual

Axis T8705 is a network video decoder that allows you to connect up to eight AXIS Companion cameras to a single display. It supports multiview mode, allowing you to see multiple camera feeds simultaneously, or sequencer mode, which cycles through each camera feed individually. You can also configure stream profiles to optimize the video quality for your specific needs. With its compact design and easy-to-use interface, Axis T8705 is an ideal solution for small businesses and home users who want to add video surveillance to their premises.

AXIST8705NetworkVideoDecoderwithAXISCompanioncameras

Integrationguide

How to use AXIS T8705 Network Video Decoder with your AXIS Companion

cameras

Pre-requisite

Install the AXIS Companion system before you follow this integration guide to AXIS T8705 Decoder and AXIS Companion.

See the online manual if you need information on how to install an AXIS Companion system.

Note

Thefollowingcamerasarenotsupported:

-AXISCompanionBulletminiLE

-AXISCompanionEyeminiL

Installthedecoder

1.InstallthedecoderaccordingtoitsInstallationGuide.

Logontothedecoder

1.DownloadIPUtilityfromwww.axis.com/support

2.RunIPUtility.

3.Double-clickthedecoderinthelisttoopenitswebpages.

4.Logontothedecoderusingthedefaultusername"root"andpassword"pass".

5.Typeanewpasswordforthedecoder.

6.ClickNext.

Addcameras

1.Inthedecoderswebpage,gotothetopmenuandselectVideosources.

2.ClickCamerawizard.ThewizardsearchesthenetworkforAxiscameras.

3.IntheAddcredentialsdialog:

-EnteryourAXISCompanionsitename.

-EnterusernameACCAdmin.

-EnteryourAXISCompanionsitepassword.

-ClickAdd.

4.ClosetheCredentialswindow.

5.Selectthecamerasyouwanttoseeonyourmonitor,byselectingtheradiobuttonstotheright.

6.ClickConnect.

How to use AXIS T8705 Network Video Decoder with your AXIS Companion

cameras

Congurestreamproles

Important

YoumusthavethesamesettingsforresolutionandframerateforthedecoderasinthesettingsfortheAXISCompanion

camers.

Checkwhichstreamprolesareavailableinyourcameras:

1.IntheAXISCompanionPCclient,clickon

andgotoCameras.

2.Select acamera,right-clickonthe“smallliveviewwindow”ofthecamera,andselectVideoQualitySettings.

3.ChecktheresolutionandframerateforHighandLowforthecameras.

Setthesamestreamprolesinthedecoder:

4.Inthedecoder´swebpage,inthetopmenu,selectVideosources.

5.Click

6.ClickStreamproles.

7.UnderHigh,setthesameresolution,codec,framerate,andcompressionasinHighfortheAXISCompanioncameras.

8.UnderMedium,Low,andSmall,setthesameresolution,codec,framerate,andcompressionasinLowforthe

AXISCompanioncameras.

9.ClickSavecamera.

10.Repeatstep1to9foreachcamera.

Conguredisplay

1.Inthetopmenu,selectDisplay.

2.GotoMultimode:

-SelectMultiviewtoshowamatrixofseveralvideostreams.

GotoView,andselecthowmanystreamstoshowinthedisplay.

-SelectSequencertoshoweachcamera,oneatatime.

GotoSequencerinterval,andselectforhowlongtodisplayeachcamera.

3.GotoVideooutput,andselecttheresolutionforthedisplay.

4.ClickSave.

IntegrationguideVer.M4.2

AXIST8705NetworkVideoDecoderwithAXISCompanioncamerasDate:October2018

PartNo.T10121503

Axis T8705 Integration Manual

Axis T8705 Integration Manual

Axis T8705 Integration Manual

Related papers

Other documents