2. Kohler
  3. K-2297-95
K-2297-95

Kohler K-2297-95 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Kohler K-2297-95 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
•
Vitreous china
•
Drop-in
•
With overflow
•
8″ (203 mm) centers (-8), 4″ (102 mm) centers (-4),
or single-hole (-1)
•
21-13/16″ (554 mm) x 16-9/16″ (421 mm) x 8-1/16″
(205 mm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASME A112.19.2/CSA B45.1
•
ADA
•
ICC/ANSI A117.1
DROP-IN BATHROOM SINK
K-2991
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Accessories
•
CP: Polished Chrome
Specified Model
Model Description Colors/Finishes
K-2991-1 Drop-in bathroom sink – single-hole ❑ 0 ❑ Other_____
K-2991-4 Drop-in bathroom sink – 4″ (102 mm) ❑ 0 ❑ Other_____
K-2991-8 Drop-in bathroom sink – 8″ (203 mm) (shown) ❑ 0 ❑ Other_____
Recommended Accessories
K-8998 Adjustable P-Trap ❑ CP
Product Specification
The drop-in bathroom sink with overflow shall be made of vitreous china. Drop-in bathroom sink shall be 21-13/16″ (554 mm)
in length, 16-9/16″ (421 mm) in width, and 8-1/16″ (205 mm) in depth. Bathroom sink shall have 8″ (203 mm) centers
(K-2991-8), 4″ (102 mm) centers (K-2991-4), or single-hole (K-2991-1). Bathroom sink shall be Kohler Model
K-2991-_______-_______.
TRESHAMTM
Page 1 of 2
1162721-4-
B
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Technical Information
Fixture*:
Basin area 19-13/16″ (503 mm) x 10-3/16″ (259 mm)
Water depth 6-1/16″ (154 mm)
Drain hole Ø 1-3/4″ (44 mm)
* Approximate measurements for comparison only.
Holes K-2991-8 K-2991-4 K-2991-1
Spout Ø 1-3/8″
(35 mm)
Ø 1-1/4″
(32 mm)
Ø 1-3/8″
(35 mm)
Faucet Ø 1-3/8″
(35 mm)
Ø 1-1/4″
(32 mm)
Included components:
Cut-out template 1162721-7
Installation Notes
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cut-out
template is used.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
4" (102 mm)
2-7/8"
(73 mm)
10-7/8"
(276 mm)
9-7/16"
(240 mm)
21-13/16" (554 mm)
K-2991-8
16-9/16" (421 mm)
8-1/16"
(205 mm)
14-5/16"
(364 mm)
4" (102 mm)
2-7/8"
(73 mm)
K-2991-1
2-7/8"
(73 mm)
K-2991-4
3/8" Hot
3/8" Cold
1-1/4" OD
2-7/16"
(62 mm)
4" (102 mm)
12"
(305 mm)
Recommended ADA Installation
11" (152 mm)
3-3/16" (81 mm)
24" (610 mm)
27"
(686 mm)
Min
9" (229 mm) Min
34"
(864 mm)
8"
(203 mm)
Min
Product Diagram
TRESHAMTM
TRESHAMTM DROP-IN BATHROOM SINK
Page2of2
1162721-4-
B
/