Product Information
Applicable product:
Under-mount bathroom sink K-2882
Fixture*:
Basin area 17-1/4″ (438 mm) x 13″ (330 mm)
Water depth 3-1/8″ (79 mm)
Drain hole Ø 1-3/4″ (44 mm)
* Approximate measurements for comparison only.
Cutout template 1109226-7
Included components:
Basin clamp assembly 1193643
Recommended accessories:
Adjustable P-Trap K-8998
Installation Notes
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the
current product template available at www.kohler.com, or by
calling 1-800-4KOHLER. Kohler Co. is not responsible for
cutout errors when the incorrect cutout template is used.
Will comply with ADA when installed per section 606
Lavatories and Sinks of the 2010 ADA Standards for
Accessible Design.
For under-mount installation, countertop thickness cannot be
greater than 1″ (25 mm) for ADA compliance.
Fixture conforms to standard ASME A112.19.1/CSA B45.2. All
dimensions are nominal.
9-15/16" (252 mm)
7-3/4"
(197 mm)
19-13/16" (503 mm)
6-3/4"
(171 mm)
1/2" (13 mm)
24" (610 mm)
Recommended ADA Installation
11"
(279 mm)
3-1/4"
(83 mm)
34"
(864 mm)
27"
(686 mm)
Min
8" (203 mm)
Min
9" (229 mm)
Min
12-3/8"
(314 mm)
15-5/8"
(397 mm)
14"
(356 mm)
3/8" Hot
3/8" Cold
4" (102 mm)
Roughing-In
K-2882
VERTICYL
TM
UNDER-MOUNT BATHROOM SINK
VERTICYLTM UNDER-MOUNT BATHROOM SINK
1109225-1-
E
-
1
Kohler 2882-7 User guide
- Type
- User guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Iron Plains K-20213-P5-96 User manual
-
Kohler R2882-0 Dimensions Guide
-
-
-
-
-
Kohler K-2991-1-96 Operating instructions
-
-
-
