Recommended ADA Installation
24" (610 mm)
34"
(864 mm)
27"
(686 mm)
Min
11"
(27.9 cm)
9"
(229 mm)
Min
3-11/16"
(94 mm)
8"
(203 mm)
Min
16-1/2"
(419 mm)
20-1/8" (511 mm)
7-5/8"
(194 mm)
2-5/16"
(59 mm)
2" (51 mm)
4" (102 mm)
3/8" Hot
3/8" Cold
1-1/4" OD
14"
(356 mm)
7-3/8"
(187 mm)
13-7/8"
(352 mm)
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
Drop-inInstallation:
Spout must be 5" (12.7 cm) long (min) for
adequate clearance into the lavatory when
installed with the centerline as shown.
With overflow: Yes
Water depth: 5-5/8" (143 mm)
Bowl area:
YesWith overflow:
Spout must be tall enough to clear 3" (7.6 cm)
rim height and provide a 1" (2.5 cm) air gap per
ASME A112.1.1.
4" (102 mm)Faucet hole spacing:
1-1/4" (32 mm)Faucet hole(s):
1-3/4" (44 mm)Drain hole:
NOTICE: Countertop manufacturer or cutter must
use the cut-out template provided with the
1155261-7, required, includedTemplate:
product, or a current one provided by Kohler Co.
(call 1-800-4-KOHLER). Kohler Co. is not
responsible for cut-out errors when the incorrect
cut-out template is used.
ADA compliant when installed to the specific
requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
8-10-2020 13:43 - US/CA
Bryant
®
Oval
Oval Self-Rimming Lavatory
K-R2699-4