SOUTHBAY 22020-2 Troubleshooting guide

Brand
SOUTHBAY
Model
22020-2
Type
Troubleshooting guide

SOUTHBAY 22020-2 is a lighting fixture that requires professional installation. Once installed, it can be used to illuminate a room or space. The fixture can accommodate a single light bulb, which is not included with the purchase. The fixture is made of metal and glass, and it features a decorative crystal design. It is suitable for use in dry locations only.

SOUTHBAY 22020-2 is a lighting fixture that requires professional installation. Once installed, it can be used to illuminate a room or space. The fixture can accommodate a single light bulb, which is not included with the purchase. The fixture is made of metal and glass, and it features a decorative crystal design. It is suitable for use in dry locations only.

Instrucciones de instalación 22020-2
Por favor, suspender el suministro de energía y leer este instructivo
antes de proceder con la instalación, reemplazar el bombillo o limpiar
la luminaria.
La instalación debe ser realizada por un electricista cualificado y con
licencia.
A. Utilice los pasadores (12) para fijar la decoración de cristal (13) a la pantalla
(14).
B. Utilizar los tornillos (3) para fijar la barra de montaje (2) a la cajilla de la
salida eléctrica.
C. Utilizar los conectores (5) para realizar las conexiones de los cables. Conectar
el cable de línea (negro) del cable conductor (8) al cable de línea de la fuente
principal de alimentación. Conectar el cable neutral (blanco) del cable
conductor (8) al cable neutral de la fuente principal de alimentación. Conectar
el cable de aterrizaje (4) de la luminaria al cable de aterrizaje (1) de la fuente
principal de alimentación con el tornillo verde (11) de la barra de montaje (2).
Por favor, evite dejar los cables expuestos al momento de realizar las
conexiones de los cables.
D. Utilizar los tornillos (6) para fijar la base (7) a la barra de montaje (2).
E. Instalar el bombillo (10) (no incluido) a la potencia recomendada en el
socket (9).
F. Confirmar que la instalación esté completada y reanudar el suministro de
energía.
Installation Instruction for Item 22020-2
Please turn off power and read this instruction before installation, changing
the bulb or cleaning the fixture.
The installation must be handled by a qualified electrician with license.
A. Use pins (12) to fix crystal decorations (13) to shade (14).
B. Use screws (3) to fix mounting bar (2) to the junction box.
C. Make the wire connection with connectors (5). Connect the live wire (black) of
lead wire (8) to the live wire from main power supply. Connect the neutral
wire (white) of lead wire (8) to the neutral wire from main power supply.
Connect the earth wire (4) from fitting to the earth wire (1) from main power
supply with green screw (11) on mounting bar (2). Please pay close attention to
avoiding the wires exposing outside when wiring connection.
D. Use screws (6) to fix canopy (7) to mounting bar (2).
E. Install bulb (10) (not included) at recommended wattage to socket (9).
F. Check if the installation is completed and turn on the power.
  • Page 1 1
  • Page 2 2

SOUTHBAY 22020-2 Troubleshooting guide

Brand
SOUTHBAY
Model
22020-2
Type
Troubleshooting guide

SOUTHBAY 22020-2 is a lighting fixture that requires professional installation. Once installed, it can be used to illuminate a room or space. The fixture can accommodate a single light bulb, which is not included with the purchase. The fixture is made of metal and glass, and it features a decorative crystal design. It is suitable for use in dry locations only.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents