Alaterre Furniture ACCA15BA Operating instructions

4/12/17 1 of 2 Round End Table

Step 1

Alaterre Furniture

Country Cottage Round End Table

Thank you for purchasing the Country Cottage Round End Table from ALATERRE FURNITURE. We

have found it helpful to have a second person present during the assembly process.

Round End Table Assembly Instructions

Parts

Read through these instructions thoroughly before beginning assembly. We have found this

to be of great value when assembling this product.

M6*35mm

BOLT

QTY.DRAWING DESCRIPTIONNO.

M6*20mm

BOLT

4/12/17 2 of 2 Round End Table

Step 2

Step 3

Step 4

CARE

For best service, to order replacement parts go to www.alaterrefurniture.com. Use the order form

on the web site to order your replacement parts. Thank You!

Remove all parts and hardware from packing material. Wooden pieces should be placed on a

non abrasive surface to prevent damage to the finish.

Lay Top (A) upside down on a non abrasive surface. Attach 3 Posts (B) using 3-M6 35MM

Hex Bolts (D). NOTE: Do not tighen firmly at this time.

Attach Bottom (C) to Post (B) using 3-M6 20MM Hex Bolts (E). Note: DO NOT

TIGHTEN AT THIS TIME! Attach Final Post (B) to Top (A) using 1 M6 35MM Hex Bolt

(D) and Bottom (C) using 1 M6 20MM Hex Bolts (E). TIGHTEN ALL BOLTS AT THIS

TIME!

Clean with a non abrasive cloth using a mild soap. Make sure to wipe dry.

REPLACEMENT PARTS: