Noble House 235123 Operating instructions

Type
Operating instructions

This manual is also suitable for

Assembly Instructions
Caution : You must read this before you proceed.
Swivel Barstool
1 OF 5
CAUTION : This barstool is NOT a TOY.
Keep your child / children at bay in the process of assembly.
1 OF 5
No. Picture Description Qty
A
Chair Seat 1
B
Iron Plate 1
C
Chair Leg base 1
No. Picture Description Qty
D
Bolts(M8*40mm
5
E
Washers ( 8mm )
9
2 OF 5
E
Washers
(
8mm
)
9
F
Springs Washers ( 8mm) 5
G
Nuts ( 8mm ) 5
H
Spanner 2
Before Beginning Assembly:
2 OF 5
Step 1
Step 2
Place all parts on a clean soft surface.
3 OF 5
Attach the Iron Plate(B) to the undersidebase of the Chair Seat(A).
Align the holes on the bottom of the Chair seat(A) with the holes on the Iron Plate(B).
Insert Flat washers(E) to the Bolts(D), then insert the bolts from the holes on the seat
to the holes on the Iron Plate.
Put Flat washers(E) + Spring washers(F) + Nuts(G) to the Blots,partially tighten all
bolts into position.
Once all Bolts and Nuts are in postion, use one Spanner (H) to hold the Bolt, and the
other Spanner to turn lock the Nut.
Do this in a sequential manner.
3 OF 5
Step 3
Attach the Chair Seat(A) with attached Iron Plate to the Chair Leg Base(C) as pictured
above.
The Stem from the Iron Plate is to be aligned and fully inserted into the end of the
Chair Leg Base Stem.
Once into its housin
g,
exert force and wei
g
ht on the chair seat so as to force the Chai
r
4 OF 5
Make sure that the Chair Seat and the Chair Leg Base is fully and firmly attached
together as one complete piece
The Barstool is ready for use.
Step 4
Once
into
its
housing,
exert
force
and
weight
on
the
chair
seat
so
as
to
force
the
Chair
Seat into a locking position into the Chair Leg Base stem.
4 OF 5
5 OF 55 OF 5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Noble House 235123 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI