Hillsdale Furniture 4298-830S Installation guide

Hillsdale Furniture
Brand
Hillsdale Furniture
Model
4298-830S
Type
Installation guide
N
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Date: 12-30-2015
Page 1 of 2
CALAIS WOOD SWIVEL BARSTOOL
Model #4298-830S
HARDWARE LIST
A (20) 1/4” x 19mm Flat Washers
B (20) 1/4” Spring Washers
C (4) 1/4” x 1-3/4” Bolts
D (1) 1/4” Allen Wrench
E (4) 1/4” x 1” Bolts
F (6) 1/4” x 15mm Bolts
G (3) Metal Brackets
H (4) #7 x 15mm Screws
I (12) 1/4” x 1-1/2” Bolts
J (1)
1/4” x 4” Straight Allen Wrench
PARTS LIST
L (1) Seat Frame
M (1) Seat Cushion
N (1) Chair Back
O (1) Top Round Stretcher
P (1) Bottom Round Stretcher
Q (4) Legs
STEP 1 - Figure 1
Begin assembly by attaching the Seat Frame (L) to the Chair Back (N) by
setting in place and aligning holes and securing from left and right inside
back panel with 4 Allen Bolts (C), 4 Spring Washers (B) & 4 Flat Washers
(A). Do not fully tighten bolts.
STEP 2 - Figure 2
Next lay in the 3 Brackets (G) and secure them each with 2 Bolts (F).
QTYPART
20A
4C
4E
HARDWARE
QTYPART
HARDWARE
20
1
6
QTYPART HARDWARE
B
D
F
3G
12I
4
1
H
J
AA
A
A
FIGURE 1
B
B
C
C
HH
H
H
H
H
L
M
FIGURE 3
HH
F
F
F
F
GG
FIGURE 2
L
STEP 3 - Figure 3
Put the Seat Cushion (M) on
the Seat Frame (L) and
fasten them together with 4
Screws (H).
L
L
CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
CALAIS WOOD SWIVEL BARSTOOL
Model #4298-830S
Date: 12-30-2015
Page 2 of 2
A
B
I
A
B
I
O
Q
P
FIGURE 4
O
FIGURE 5
A
B
E
A
A
A
B
B
B
E
E
E
STEP 4 - Figure 4
Attach 4 Legs (Q) to the Top Round Stretcher (O)
using 8 Bolts (I), 8 Spring Washers (B) and 8 Flat
Washers (A). Do not tighten them and leave space
for the Stretcher (P). Attach the Stretcher (P) to the
Legs (Q) using 4 Bolts (I), 4 Spring Washers (B)
and 4 Flat Washers (A). See Figure 5. Tighten all
the bolts using the Allen Wrench (D or J) when
they are all in the position.
STEP 5 - Figure 5
Align the holes of the swivel on the Top Round
Stretcher (O) with the pre-embedded nut holes in
the Seat Frame (L) bottom. Attach them with 4
Bolts (E), 4 Spring Washers (B) and 4 Flat
Washers (A) and tighten them using the Allen
Wrench (D or J). Do not tighten them before all
the bolts are in the position. The assembly is
now complete.
  • Page 1 1
  • Page 2 2

Hillsdale Furniture 4298-830S Installation guide

Hillsdale Furniture
Brand
Hillsdale Furniture
Model
4298-830S
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents