Step 1
Step 2
Place all parts on a clean soft surface.
3 OF 5
Attach the Iron Plate(B) to the undersidebase of the Chair Seat(A).
Align the holes on the bottom of the Chair seat(A) with the holes on the Iron Plate(B).
Insert Flat washers(E) to the Bolts(D), then insert the bolts from the holes on the seat
to the holes on the Iron Plate.
Put Flat washers(E) + Spring washers(F) + Nuts(G) to the Blots,partially tighten all
bolts into position.
Once all Bolts and Nuts are in postion, use one Spanner (H) to hold the Bolt, and the
other Spanner to turn lock the Nut.
Do this in a sequential manner.
3 OF 5