Toro Replacement Pulley Kit, Z593-D Z Master Models 74264 and 74265 Installation guide

Brand: Toro

Model: Replacement Pulley Kit, Z593-D Z Master Models 74264 and 74265

Type: Installation guide

This manual is also suitable for

Replacement Pulley Kit, Z593-D Z Master Models 74264TE and 74265TE

Form No. 3355-106 Rev A

Replacement Pulley Kit

For Z593-D Z Master® Models 74264, 74264TE, 74265

and 74265TE

Model No. 110-3944

Model No. 110-3945

Installation Instructions

T his kit is for installing a DFS bag g er onto a

Z593–D Z Master .

Note: Before remo ving the pulley , mak e sure the g earbo x dri v e pulley does not ha v e 4 holes around

the center hole .

Step

Replacing the Gearbox Drive

Pulley

Parts needed for this step:

Pulley

Square key

2 Set screw

Procedure

1. R emo v e the mo w er belt from the g earbo x

pulley assembly ( Figure 1 ).

2. R emo v e the 2 set screws , square k ey , and

g earbo x pulley from the g earbo x.

3. Install the bag g er dri v e pulley to the new

g earbo x pulley with 3 bolts (3/8 x 1-3/4

inc hes), 3 spacers , and 3 ﬂang e n uts (3/8 inc h)

( Figure 1 ). T his hardw are is supplied with the

bag g er .

4. Install the g earbo x pulley and bag g er dri v e

pulley to the g earbo x with 2 set screws and a

square k ey ( Figure 1 ). T he pulley center hub

needs to be ﬂush with the end of the g earbo x

shaft.

5. Install the mo w er belt bac k onto the g earbo x

pulley ( Figure 1 ).

Figure 1

1. Gearbox

5. Spacer

2. Flange nut, 3/8 inch 6. Bagger drive pulley

3. Gearbox drive pulley 7. Bolt, 1/2 x 1-3/4 inch

4. Set screw

8111 Lyndale Avenue South

Bloomington, MN 55420

Printed in the USA.

Toro Replacement Pulley Kit, Z593-D Z Master Models 74264 and 74265 Installation guide

Brand: Toro

Model: Replacement Pulley Kit, Z593-D Z Master Models 74264 and 74265

Type: Installation guide

This manual is also suitable for

Replacement Pulley Kit, Z593-D Z Master Models 74264TE and 74265TE

Download PDF

report

Toro Replacement Pulley Kit, Z593-D Z Master Models 74264 and 74265 Installation guide

This manual is also suitable for

Toro Replacement Pulley Kit, Z593-D Z Master Models 74264 and 74265 Installation guide

Related papers

Other documents