12
DS-700AC User's Manual
USB Device Server Feature
- Share various USB devices
By using DS-700AC and the bundled utility, SX Virtual Link, you can share various USB devices
such as printers, scanners and storage devices among Windows PC (refer to 2-3-2. Software
Specications). DS-700AC allows you to use USB devices as if they were connected directly to
your PC.
(For details on SX Virtual Link, refer to 4-1-2. What is SX Virtual Link?.)
- Support USB device that uses isochronous transfer
You can share the USB devices that use isochronous transfer (e.g. Web camera, USB speaker,
etc) over the network. For the isochronous devices, it is recommended to use Gigabit Ethernet
environment.
- Printer auto connection
When printing to a USB device, the print operation executed to the device will automatically
prompt SX Virtual Link to connect with the device to print and disconnect after the job is printed.
It is not required to manually connect to the device with SX Virtual Link for printing.
Wireless Conguration Using a Push Switch
DS-700AC support the wireless conguration using Smart Wireless Setup. If your wireless router
(Access Point) supports WPS (Wi-Fi Protected Setup), you can congure the wireless settings easily
using the push switch.
-
Silex Technology shall not be liable for any loss or damage of data in data storage devices resulting from the use
of DS-700AC. Silex Technology shall also not be liable for any leak, manipulation, loss, or corruption of data in
data storage devices connected to DS-700AC as a result of improper use.
-
If a USB HUB is used, multiple USB devices can be connected, however, the USB3.0 port does not support
connection of a USB HUB. Also, when using a USB HUB for the USB2.0 port, make sure that only one HUB is
connected.
-
When you use isochronous devices such as Web camera, USB speaker, etc, please connect them directly to
DS-700AC.
-
If isochronous devices such as Web cameras or USB speakers, etc. are used on a 100BASE-TX/10BASE-T network,
frame dropping or sound skipping may occur.
-
Some USB devices may not be supported depending on the driver specication. For the latest compatibility
information, please visit our website ( https://www.silextechnology.com/ ).
TIP
Print Server Feature
- Supports Raw/LPR printing
DS-700AC supports "Raw" and "LPR" of network printing protocols.
When a printer is connected to DS-700AC, you can use the standard Windows printing feature.
Print server feature runs in bidirectional communication.