Hold It Mate 713 Installation guide

Type
Installation guide

Hold It Mate 713 is a versatile accessory designed to enhance your outdoor railing experience. With its adjustable height and secure mounting system, it offers a range of possibilities for customizing your deck or patio. Use it to hold items like drinks, snacks, books, or even your phone, keeping them conveniently within reach while you relax or entertain guests. The 713's durable construction ensures stability and longevity, making it a reliable companion for outdoor gatherings.

Hold It Mate 713 is a versatile accessory designed to enhance your outdoor railing experience. With its adjustable height and secure mounting system, it offers a range of possibilities for customizing your deck or patio. Use it to hold items like drinks, snacks, books, or even your phone, keeping them conveniently within reach while you relax or entertain guests. The 713's durable construction ensures stability and longevity, making it a reliable companion for outdoor gatherings.

Insert sleeve nut into recessed hole side of Rail B
and loosely screw bolt into the sleeve nut. Next,
insert round bolt end into the round end of the
key hole slot of Rail A (it goes in best
at an angle).
OPTIONAL: Insert plastic
plug into round hole of
Rail A which can keep Rail A
from falling o the bolt
during installation.
6” Rail Installation instructions
Visit holditmate.com/install for a video tutorial.
A
B
A
B
2.
Choose the bolt that
is just a bit longer than
your spindle width
1.
Hang Rail A horizontally so
the bolt is up in the narrow
end of the key hole slot,
allowing it to fit through
the decks spindles.
3.
Once level, tighten sleeve
nut with Allen wrench — do
not over tighten — a snug
fit will do. If releveling is
needed, simply loosen the
sleeve nut a little, adjust
and repeat step.
5.
Turn Rail A to be level with
Rail B at the desired height
on railing.
4.
Connect Hold It Mate
Accessory. If you’d like to
position rail and accessory
flush with the hand rail on
your deck, simply loosen the
sleeve nut with the accessory
attached, slide themup and
retighten.
6.
Too long
Just Right
Too short
A
B
A
B
WARNING: YOU, THE PURCHASER, ASSUME THE RISK OF PROPERLY USING AND MOUNTING THE HOLD IT MATE SYSTEM, INCLUDING ANY ADDITIONAL ACCESSORIES (TOGETHER, THE “PRODUCT”), TO APPROPRIATE STRUC-
TURES AND LOCATIONS. THE PRODUCT MUST NOT BE MOUNTED TO ANY STRUCTURE NOT RATED TO HOLD PRODUCT’S WEIGHT. This Product is sold AS-IS” without a warranty of any kind, expressed or implied, including
any warranties or conditions of merchantability and tness for a particular purpose. In no event shall there be any liability for any direct, indirect, punitive, incidental, special, consequential or other damages arising out
of or related to the use or misuse of this Product. The purchase and use of any additional accessories shall be limited to their specied use, and such use shall be subject to the warning set forth herein. If you do not accept
the terms provided herein, please contact customer service at [email protected] for instructions to return within 30 days from purchase or simply return where you purchased the product.
  • Page 1 1

Hold It Mate 713 Installation guide

Type
Installation guide

Hold It Mate 713 is a versatile accessory designed to enhance your outdoor railing experience. With its adjustable height and secure mounting system, it offers a range of possibilities for customizing your deck or patio. Use it to hold items like drinks, snacks, books, or even your phone, keeping them conveniently within reach while you relax or entertain guests. The 713's durable construction ensures stability and longevity, making it a reliable companion for outdoor gatherings.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI