Page is loading ...
Page 1 - C190POS Quickstart Guide
www.cubetape.com/downloads/C190POS Quickstart Guide
Contents
Installation
Operations and Measuring
• To power on hold down ‘m’ button
for 2 seconds
• Press ‘m’ to scan and send a barcode
• Extend the tape and press ‘m’
to scan and send a dimension
Bluetooth Pairing - to pair Cubetape with its cradle
• After cradle installation, power on Cubetape
• Scan the Bluetooth pairing barcode on the front of the cradle
• Cubetape is successfully connected to the cradle, when the
Blue LED indicators on Cubetape and the cradle are permanently ON.
• If the Blue LED indicators continue to flash, re-scan the Bluetooth
pairing barcode on the cradle
C190POS Cubetape C190DSK Cradle C190CRC USB Cable
DIP switches beneath cradle
Correct Incorrect
C190POS Quickstart Guide
USB Cable
PC
Cradle
OFF ON DEFAULT
1
BLUETOOTH
MODE MASTER
SLAVE ON
2 USB-VCP USB-HID ON
3 RESERVED - OFF
4 RESERVED
BT ADDRESS
OUTPUT
OFF
Pairing Barcode
1 2 3 4
ON
Page 1 - C190POS Quickstart Guide
www.cubetape.com/downloads/C190POS Quickstart Guide
Contents
Installation
Operations and Measuring
• To power on hold down ‘m’ button
for 2 seconds
• Press ‘m’ to scan and send a barcode
• Extend the tape and press ‘m’
to scan and send a dimension
Bluetooth Pairing - to pair Cubetape with its cradle
• After cradle installation, power on Cubetape
• Scan the Bluetooth pairing barcode on the front of the cradle
• Cubetape is successfully connected to the cradle, when the
Blue LED indicators on Cubetape and the cradle are permanently ON.
• If the Blue LED indicators continue to flash, re-scan the Bluetooth
pairing barcode on the cradle
C190POS Cubetape C190DSK Cradle C190CRC USB Cable
DIP switches beneath cradle
Correct Incorrect
C190POS Quickstart Guide
USB Cable
PC
Cradle
OFF ON DEFAULT
1
BLUETOOTH
MODE MASTER
SLAVE ON
2 USB-VCP USB-HID ON
3 RESERVED - OFF
4 RESERVED
BT ADDRESS
OUTPUT
OFF
Pairing Barcode
1 2 3 4
ON
Page 1 - C190POS Quickstart Guide www.cubetape.com/downloads/C190POS Quickstart Guide
Contents
Installation
Operations and Measuring
• To power on hold down ‘m’ button
for 2 seconds
• Press ‘m’ to scan and send a barcode
• Extend the tape and press ‘m’
to scan and send a dimension
Bluetooth Pairing - to pair Cubetape with its cradle
• After cradle installation, power on Cubetape
• Scan the Bluetooth pairing barcode on the front of the cradle
• Cubetape is successfully connected to the cradle, when the
Blue LED indicators on Cubetape and the cradle are permanently ON.
• If the Blue LED indicators continue to flash, re-scan the Bluetooth
pairing barcode on the cradle
C190POS Cubetape C190DSK Cradle C190CRC USB Cable
DIP switches beneath cradle
Correct Incorrect
C190POS Quickstart Guide
USB Cable
PC
Cradle
OFF ON DEFAULT
1
BLUETOOTH
MODE MASTER
SLAVE ON
2 USB-VCP USB-HID ON
3 RESERVED - OFF
4 RESERVED
BT ADDRESS
OUTPUT
OFF
Pairing Barcode
1 2 3 4
ON
Page 1 - C190POS Quickstart Guide www.cubetape.com/downloads/C190POS Quickstart Guide
Contents
Installation
Operations and Measuring
• To power on hold down ‘m’ button
for 2 seconds
• Press ‘m’ to scan and send a barcode
• Extend the tape and press ‘m’
to scan and send a dimension
Bluetooth Pairing - to pair Cubetape with its cradle
• After cradle installation, power on Cubetape
• Scan the Bluetooth pairing barcode on the front of the cradle
• Cubetape is successfully connected to the cradle, when the
Blue LED indicators on Cubetape and the cradle are permanently ON.
• If the Blue LED indicators continue to flash, re-scan the Bluetooth
pairing barcode on the cradle
C190POS CubetapeC190DSK CradleC190CRC USB Cable
DIP switches beneath cradle
CorrectIncorrect
C190POS Quickstart Guide
USB Cable
PC
Cradle
OFFONDEFAULT
1
BLUETOOTH
MODE MASTER
SLAVEON
2USB-VCPUSB-HIDON
3RESERVED-OFF
4RESERVED
BT ADDRESS
OUTPUT
OFF
Pairing Barcode
1 2 3 4
ON
C190POS Quickstart Guide
June 2020
C190POS Quickstart Guide
June 2020
C190POS Quickstart Guide
June 2020
C190POS Quickstart Guide
June 2020
www.cubetape.com/downloads/C190POS Quickstart Guide
Page 2 - C190POS Quickstart Guide
Charging
• To charge battery place device in the cradle
• Battery is charging when device LED is red
• Battery is fully charged when device LED is green or off
Device LED
RED Cubetape charging
GREEN Cubetape charged
General Settings
Factory Defaults
Bluetooth Cradle Pairing Mode
Suffix TAB
Nearest whole inch
For more information, communication and
configuration options please refer to the user guide
at www.cubetape.com/downloads
Battery Compartment
Tape
Cassette
Battery
Tape Compartment
Default Factory Setting
Default Engine Setting
Bluetooth Reset
Suffix = TAB
Suffix = CR
DEVICE
BLUETOOTH
C190POS Quickstart Guide
June 2020
/