American Standard 0467400R.020 Dimensions Guide

  • Hello! I am an AI chatbot trained to assist you with the American Standard 0467400R.020 Dimensions Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
L6
© 2020 AS America Inc.
spec_0467400R_MainstreamPedSink 04/2020
Mainstream
®
Pedestal Sink
VITREOUS CHINA
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
ANCHOR SCREWS FOR PEDESTAL NOT INCLUDED.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
SUITABLE FOR REINFORCEMENT ONLY, ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
3 x 1-3/8"
(35mm)
DIA
2-1/2"
(63mm)
22"
(558mm)
7-7/8"
(200mm)
17-1/2"
(444mm)
1-3/4"
(44mm)
2-1/2"
(64mm)
FINISHED
WALL
4"
(102mm)
SIDE VIEW
27-5/8"
(702mm)
OPEN TO
FLOOR
BACK VIEW
6-1/2"
(166mm)
6-1/4"
(158mm)
1-1/4" O.D.
WASTE
1-1/4" O.D.
TAILPIECE
SUPPLIES
AS REQ'D
FRONT VIEW
34-1/4"
(870mm)
31-1/4"
(794mm)
7"
(178mm)
7"
(178mm)
C
L
22"
(558mm)
3-1/8±1/4"
(78±5mm)
7-1/8±1/4"
(180±5mm)
REF.
HOLES FOR
ANCHOR BOLTS
*23"
(584mm)
*20-1/2"
(521mm)
8-1/8±1/4"
(210±5mm)
To Be Specied:
Color: White
Faucet:
Faucet Finish:
Supplies:
1-1/4" Trap:
Mainstream
®
Pedestal Sink
0467400R Mainstream Pedestal Sink
High-gloss, stain-resistant vitreous china
lavatory top with pedestal leg in single carton
4-inch centerset faucet holes (faucet sold
separately)
Counter height with wide shelf area for
comfortable use
Wall mounting anchoring hardware included
Nominal Dimensions:
22" x 17-1/2" x 34-1/4"
(558 x 444 x 870mm)
Bowl size:
18-1/4" (464mm) wide
11" (279mm) front to back
6" (152mm) deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2/CSA B45.1 for Vitreous
China Fixtures
/