Lanier D7510 Operating instructions

Operating Instructions

For safe and correct use, be sure to read the Safety Information in Read

This First before using the machine.

TABLE OF CONTENTS

Disclaimer............................................................................................................................................................3

1. Using the Remote Control

Names and Functions of the Remote Control Buttons......................................................................................5

Installing the Batteries into the Remote Control................................................................................................ 7

Removing the Batteries from the Remote Control.............................................................................................9

Remote Control Usage Tips.............................................................................................................................10

2. Connection

Connecting Audio/Video Signals.................................................................................................................. 13

Connecting the VGA Input.......................................................................................................................... 13

Connecting the Digital Inputs......................................................................................................................14

Connecting External Speakers....................................................................................................................14

Connecting Multiple Displays.....................................................................................................................15

Connecting with a USB Cable....................................................................................................................17

3. Using the Touch Screen

Important Instructions for Using the Touch Screen.........................................................................................19

4. The On-Screen Display Menu

The On-Screen Display Menu Overview.......................................................................................................21

Operations in the On-Screen Display Menu................................................................................................. 23

Using the Control Panel Buttons (RICOH Collaboration Board D5530/D5530BK)........................... 23

Using the Control Panel Buttons (RICOH Collaboration Board D6520/D6520BK/D7510/

D7510BK)....................................................................................................................................................25

Using the Remote Control............................................................................................................................26

Picture Menu.....................................................................................................................................................28

Sound Menu..................................................................................................................................................... 30

Screen Menu.................................................................................................................................................... 32

PAP Setting (Picture and Picture).................................................................................................................32

Aspect........................................................................................................................................................... 33

Adjust Screen............................................................................................................................................... 34

Touch Feature...............................................................................................................................................35

Setting Menu.................................................................................................................................................... 36

Language......................................................................................................................................................36

Power Save.................................................................................................................................................. 36

Control Setting..............................................................................................................................................37

1

Touch Control Setting.................................................................................................................................. 37

Set Monitor ID..............................................................................................................................................38

Motion Detection......................................................................................................................................... 38

Advanced..................................................................................................................................................... 38

Information................................................................................................................................................... 40

All Reset........................................................................................................................................................ 40

5. Product Information

Specifications....................................................................................................................................................41

List of Video Input Signals Supported by the Machine................................................................................. 48

List of PAP Input Signal Combination Supported by the Machine............................................................... 50

List of the Functions and Commands Controlled by the RS-232C Terminal................................................51

Set and Get Commands Table................................................................................................................... 53

Output Signals..................................................................................................................................................55

6. Troubleshooting

Troubleshooting................................................................................................................................................57

7. Appendix

Trademarks....................................................................................................................................................... 61

2

Disclaimer

To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for any

damages whatsoever arising out of failures of this machine, losses of the registered data, or the use or

non-use of this product and operation manuals provided with it.

Make sure that you always copy or have backups of the data registered in this machine. Documents or

data might be erased due to your operational errors or malfunctions of the machine.

In no event will the manufacturer be responsible for any documents created by you using this machine or

any results from the data executed by you.

3

4

1. Using the Remote Control

This chapter explains how to use the remote control.

Names and Functions of the Remote Control

Buttons

• Do not put the remote control in the direct heat, humidity, and avoid fire.

• Do not drop the remote control, as doing so may cause the remote control to malfunction.

• Confirm there is no object between the remote control and the remote control sensor of the product.

• When the remote control will not be used for an extended period, remove the batteries.

DTW201

1

6

7

8

9

5

3

2

4

1. [Power]

Turns the machine on or off.

2. [INPUT]

Selects an input source.

5

3. [EXIT]

Returns to the previous menu or closes the On-Screen Display menu when the On-Screen Display menu is on.

4. [ ]/[Volume ]/[ ]/[Volume ]

• Scrolls through settings and options in the On-Screen Display menu.

• Turns down/up the volume.

5. [ENTER]

Confirms your selection or save changes.

6. [INFO]

Shows the current input source and resolution.

7. Input source buttons/[PIP]

• Numeric buttons perform as input source buttons.

• Numeric button (6) turns on or off the PIP function.

• [Computer In] is only available if the controller designed compliant with OPS (Open Pluggable

Specification) standard is connected to this display.

• [DVI] is not available on this machine.

8. [MENU]

Opens or closes the On-Screen Display menu.

9. [ ]/[ ]/[Mute]

• Scrolls through settings and options in the On-Screen Display menu when the On-Screen Display menu

is on.

• Turns on or off the mute function. Used to temporarily disable audio input on the machine.

1. Using the Remote Control

6

Installing the Batteries into the Remote Control

• When batteries fail to function, replace them immediately.

• There may be local restrictions on the disposal or recycling of batteries. Consult your local

regulations or waste disposal provider.

1. Open the remote control battery cover.

2. Insert the supplied batteries ensuring that the positive and negative marked battery

terminals match the (+) and (-) marks in the battery compartment.

You should replace the supplied batteries as soon as possible.

Installing the Batteries into the Remote Control

7

3. Refit the battery cover.

1. Using the Remote Control

8

Removing the Batteries from the Remote

Control

1. Open the remote control battery cover.

2. Remove the batteries.

3. Refit the battery cover.

Removing the Batteries from the Remote Control

9

Remote Control Usage Tips

• Point and aim the top front of the remote control directly at the display’s remote control sensor

window when you press the buttons. The maximum distance for the remote control to operate

properly is 7 meters (approx. 22.9 feet) from the top front of the remote control to the remote

sensor window of the display.

• Do not let the remote control become wet or place it in humid environments (like bathrooms).

• If the display’s remote control sensor window is exposed to direct sunlight or strong light, the

remote control may not operate properly. In this situation, change the light source, readjust the

angle of the display or operate the remote control from a location closer to display’s remote

control sensor window.

RICOH Collaboration Board D5530/D5530BK

Y310IA0481

1

30°30°

1. Max. 7 m (22.9 feet)

1. Using the Remote Control

10

RICOH Collaboration Board D6520/D6520BK/D7510/D7510BK

Y310IA0495

1

30°30°

1. Max. 7 m (22.9 feet)

Remote Control Usage Tips

11

1. Using the Remote Control

12

2. Connection

This chapter explains how to connect cables.

Connecting Audio/Video Signals

Pay attention to the following notes when you connect cables:

• Please turn off all devices.

• Familiarize yourself with the audio/video ports on the machine and the devices you want to use.

Be aware that incorrect connections may adversely affect picture quality or result in the picture not

being displayed.

• Do not remove cables from the ports by pulling the cable itself. Always grasp and pull the

connectors at the end of the cable.

• Ensure that all cables are fully inserted and firmly seated.

Connecting the VGA Input

1. Connect the VGA Input jack on the display to the VGA output jack on a computer using a

D-Sub (15-pin) cable.

2. Connect the computer’s audio output jack to the Audio Input (VGA) jack on the machine

using a suitable audio cable.

2

1

Y310IA0482

1. D-Sub (15-pin) cable

13

2. Audio cable

3. Press the [VGA] button on the remote control.

To select an appropriate audio source, see page 30 "Sound Menu" for details.

• The audio cable is not supplied and should be purchased separately.

Connecting the Digital Inputs

1. Use the supplied HDMI cable to connect the HDMI output jack of a computer or A/V

device (such as a VCR or DVD player) to the HDMI Input jack on the machine. If the device

has a DisplayPort output jack, connect it to the DisplayPort Input jack on the machine

using a DisplayPort cable.

21

Y310IA0483

1. Supplied HDMI cable

2. DisplayPort cable

2. Press the [HDMI] or [DP] button on the remote control.

To select an appropriate audio source, see page 30 "Sound Menu" for details.

• The DisplayPort cable is not supplied and should be purchased separately.

Connecting External Speakers

The built-in amplifier on the machine allows you to output audio signals through external speakers.

2. Connection

14

1. Connect external speakers to the Audio Output jack on the machine.

Y310IA0484

• When connecting external speakers, use active speakers.

• You can use the remote control or the control panel on the machine to adjust the volume. To adjust

the volume, see page 30 "Sound Menu" for details.

• When using external speakers, set Speaker in the Sound menu to [Auto].

Connecting Multiple Displays

You can connect multiple displays serially (daisy chain) to a computer for management. The number of

displays you can connect serially depends on the resolution of the input signal you use.

Connecting Audio/Video Signals

15

3

2

Y310IA0485

1

4

32

1. Additional display

2. DisplayPort cable

3. RS-232C cable

4. The first display (this machine)

• The RS-232C cable and DisplayPort cable are not supplied and should be purchased separately.

• This RS-232C daisy chain application requires an RS-232C port equipped computer.

• Use RS-232C serial cross cables for daisy chain application.

• The video signals input to the DisplayPort Input jack of the additional display are output from the

DisplayPort Output jack of the first display.

2. Connection

16

Connecting with a USB Cable

Connect the machine and an external device with a USB cable to supply power to the device.

21

Y310IA0486

1. USB cable

2. External device (For example: Wireless display adaptor connected with an HDMI cable)

• For details about the name and description of each USB port, see “Input/Output Terminals”, Read

This First.

Connecting Audio/Video Signals

17

2. Connection

18

Page is loading ...

Lanier D7510 Operating instructions

This manual is also suitable for

Lanier D7510 Operating instructions

Related papers

Other documents