
The eBridge16CR is a 16 channel ethernet over coax rack mount receiver.
The eBridge16CR enables fast 10/100Base-T Ethernet digital communi-
cation to be transmitted over coax cable. This unit is designed to be used
with eBridge1CT transceivers. This plug and play unit facilitates system
upgrades from analog to IP cameras/devices utilizing existing legacy
Coax and eliminating the costs and labor associated with installing new
network cabling. In addition the use of coax enables data transmission to
be extended over 1500’ (over four times the 100m/328 ft Ethernet maxi-
mum length), eliminating the need for repeaters. At the same time the units can combine Composite Video Signal
with the Ethernet data enabling connection to an analog input on a monitor or matrix switch.
Compliant:
• Incorporates*sloc
TM
(Security Link over Coax)
technology.
Input:
• 24VDCto56VDCULListedClass2powersupply
(polarity not observed)orULListed24VACClass2
plug-in transformer.
Power Consumption:
• 24VDC/1500mA,56VDC/700mA,
24VAC/2200mA.
Ethernet:
• Sixteen(16)RJ45ethernetchannels.
• Connectivity:RJ45,auto-crossover.
• Wiretype:4-pairCat-5orhigherstructuredcable.
• Distance:upto328ft.(100m).
• Speed:10/100BaseT, half/full duplex, auto negotiation.
Coax:
• Sixteen(16)BNCinputchannels.
• Sixteen(16)BNCcompositevideooutputchannels.
• Distance:upto1,500ft.
• Connectivity:BNC,RG-59/Uorsimilar.
LED Indicators:
• BlueLED-Coaxlinkconnection.
• YellowandGreenLED(RJ45)IPLinkstatus,
10/100Base-T/active.
• GreenLED-Power.
Environmental:
• OperatingTemperature:
14ºFto122ºF(---10ºCto+50ºC).
• StorageTemperature:
--22ºto158ºF(---30ºto+70ºC)Storage.
• Humidity:20to85%,non-condensing.
Electrical:
• BTU/Hr.:
- 24VDC:18.43BTU/Hr.
- 56VDC:20.06BTU/Hr.
- 24VAC:27.02BTU/Hr.
Applications:
• RetrofitdigitalIPcamerasinananalogCCTV
installation.
• WorkswithMegapixel,HD720,HD1080andVGA
(SD)cameras.
• ExtendNetworklinkdistanceinanindustrial
environment.
• UpgradedeployedCCTVCoaxtoadigitalnetwork
for Retail, Casinos, Airports, Schools, Hospitals, etc.
• SimultaneouslyuseCompositeVideomatrixswitch
formonitordisplayandcontrol,whiletheNVR
is used for digital IP camera recording.
• eBridge is rated to pass 25mbps of data at distances
upto1500ft.Withproperheadendequipment,
multiple Megapixel cameras can be used.
Mechanical:
• 1Urackmountchassisforuseinstandard
EIA19”rack.
• EnclosureDimensions(HxWxDapprox.):
1.625”(41.275mm)x19.125”(486mm)
x8.5”(216mm)
• Productweight(approx.):6.17lbs.(2.8kg).
• Shippingweight(approx.):7.47lbs.(3.39kg).
Units available individually:
• eBridge1CT: Ethernet transceiver enables IP
video/data over Coax.
UnitoperateswitheBridge1CRandeBridge16CR
receivers.
eBridge16CR - IP over Coax Receiver
Rev.DSeBridge16CR_04042013
Specifications
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Overview
Agency Approvals
UL/CULListedforInformation
TechnologyEquipment(UL60950-1).
European Conformity
*slocisaregisteredtrademarkofIntersilCorporation.
eBridge16CR
C-TickApproved-Z1409