Hearth & Home Technologies Inc. • HEAT-ZONE® QFP • 4051-328 Rev. C • 4/11 1

HEAT-ZONE® QFP

Air Duct Adapter Kit

Instructions

This Heat-Zone® QFP Air Duct Adaptor Kit has been tested for use with QFP44. Check with your local building code

agency before you begin installation to ensure compliance with local codes, including the need for permits and follow-up

inspections. If you encounter any problems regarding code approvals, or if you need clarifi cation of any of the instructions

Gas Air Duct Kit.

discard it.

the original cover plate had been using the previously

removed screws.

Air Duct Kit to the top of the unit by lining up the holes in

the adaptor cover plate (Figure 1), the top of the adaptor

(Figure 2) and this duct. See Figure 3.

• Follow the installation instructions included with the Heat-

Zone® Gas Air Duct Kit to complete installation.

Top of Heat Zone Adaptor

Figure 2. Installing the Heat Zone Adaptor

Figure 3. Installing the Round Air Duct

CAUTION! Risk of Cuts and Abrasions. Wear protective

For the location of your nearest Hearth & Home

Technologies dealer, please visit www.fi reside.com.