Asus ROG Swift OLED PG49WCD User guide

Category
TVs & monitors
Type
User guide
E13863
USER GUIDE
ROG
SWIFT OLED PG49WCD
ii
Copyright © 2023 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
First Edition
August 2023
iii
Contents
Notices ......................................................................................................... iv
Safety Information ....................................................................................... v
Care & Cleaning .......................................................................................... vi
Takeback Services ..................................................................................... vii
Chapter 1: Product Introduction
1.1 Welcome! ...................................................................................... 1-1
1.2 Package Contents ........................................................................ 1-1
1.3 Monitor Introduction .................................................................... 1-2
1.3.1 Front View ....................................................................... 1-2
1.3.2 Back View ....................................................................... 1-3
1.3.3 GamePlus Function ........................................................ 1-4
1.3.4 GameVisual Function ...................................................... 1-6
Chapter 2: Setup
2.1 Attaching the Stand ..................................................................... 2-1
2.2 Cable Management ...................................................................... 2-2
2.3 Detaching the Stand (for VESA wall mount) .............................. 2-2
2.4 Connecting the Cables ................................................................ 2-3
2.5 Turning On the Monitor ............................................................... 2-4
2.6 Adjusting the Monitor .................................................................. 2-5
Chapter 3: General Instructions
3.1 OSD (On-Screen Display) Menu .................................................. 3-1
3.1.1 HowtoRecongure ........................................................ 3-1
3.1.2 OSD Function Introduction .............................................. 3-2
3.2 Specications ............................................................................... 3-9
3.3 Outline Dimensions ................................................................... 3-11
3.4 Troubleshooting (FAQ) .............................................................. 3-12
3.5 Supported Timing List ............................................................... 3-13
iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
tothefollowingtwoconditions:
• This device may not cause harmful interference, and
• Thisdevicemustacceptanyinterferencereceivedincluding
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
ClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimits
aredesignedtoprovidereasonableprotectionagainstharmfulinterference
inaresidentialinstallation.Thisequipmentgenerates,usesandcan
radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordance
with manufacturer’s instructions, may cause harmful interference to radio
communications.However,thereisnoguaranteethatinterferencewill
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turningtheequipmentoffandon,theuserisencouragedtotrytocorrect
theinterferencebyoneormoreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Theuseofshieldedcablesforconnectionofthemonitortothegraphicscardis
requiredtoassurecompliancewithFCCregulations.Changesormodications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Canadian Department of Communications Statement
ThisdigitalapparatusdoesnotexceedtheClassBlimitsforradio
noiseemissionsfromdigitalapparatussetoutintheRadioInterference
RegulationsoftheCanadianDepartmentofCommunications.
ThisclassBdigitalapparatuscomplieswithCanadianICES-003.
ThisClassBdigitalapparatusmeetsallrequirementsoftheCanadian
Interference-CausingEquipmentRegulations.
CetappareilnumériquedelaclasseBrespectetouteslesexigencesdu
RéglementsurlematérielbrouillerduCanada.
v
Safety Information
• Beforesettingupthemonitor,carefullyreadallthedocumentationthat
camewiththepackage.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltagesinside
the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Beforeusingtheproduct,makesureallcablesarecorrectlyconnected
andthepowercablesarenotdamaged.Ifyoudetectanydamage,contact
your dealer immediately.
• Slotsandopeningsonthebackortopofthecabinetareprovidedfor
ventilation. Do not block these slots. Never place this product near or over
a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Usetheappropriatepowerplugwhichcomplieswithyourlocalpower
standard.
• Donotoverloadpowerstripsandextentioncords.Overloadingcanresult
in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplugtheunitduringalightningstormorifitwillnotbeusedforaong
periodoftime.Thiswillprotectthemonitorfromdamageduetopower
surges.
• Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between100-240VAC.
• If you encounter technical problems with the monitor, contact a qualified
service technician or your retailer.
• Adjustmentofthevolumecontrolaswellastheequalizertoothersettings
thanthecenterpositionmayincreasetheear-/headphonesoutputvoltage
and therefore the sound pressure level.
vi
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronicequipment,andmercury-containingbuttoncellbattery)shouldnot
beplacedinmunicipalwaste.Pleasechecklocalregulationsfordisposalof
electronic products.
AEEEyönetmeliğineuygundur
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cablesandpowercord.Followthecorrectliftingtechniqueswhen
positioningthemonitor.Whenliftingorcarryingthemonitor,graspthe
edgesofthemonitor.Donotliftthedisplaybythestandorthecord.
• Cleaning.Turnyourmonitoroffandunplugthepowercord.Cleanthe
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may
be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the screen,
as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• Thescreenmay flickerduringtheinitial usedueto thenatureofthe
fluorescentlight.TurnoffthePowerSwitchandturnitonagaintomake
sure that the flicker disappears.
• Youmayfindslightlyunevenbrightnessonthescreendependingonthe
desktop pattern you use.
• Whenthesameimageisdisplayedforhours,anafterimageoftheprevious
screenmayremainafterswitchingtheimage.Thescreenwillrecover
slowly or you can turn off the Power Switch for hours.
• Whenthescreenbecomesblackorflashes,orcannotworkanymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
vii
Conventions used in this guide
WARNING:Informationtopreventinjurytoyourselfwhentrying
to complete a task.
CAUTION:Informationtopreventdamagetothecomponents
whentryingtocompleteatask.
IMPORTANT:InformationthatyouMUSTfollowtocompletea
task.
NOTE:Tipsandadditionalinformationtoaidincompletingatask.
Where to nd more information
Refertothefollowingsourcesforadditionalinformationandforproduct
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Yourproductpackagemayincludeoptionaldocumentationthatmay
have been added by your dealer. These documents are not part of
thestandardpackage.
3. About Flicker
https://www.asus.com/Microsite/display/eye_care_technology/
Takeback Services
ASUSrecyclingandtakebackprogramscomefromourcommitmenttothe
higheststandardsforprotectingourenvironment.Webelieveinproviding
solutions for our customers to be able to responsibly recycle our products,
batteriesandothercomponentsaswellasthepackagingmaterials.
Pleasegotohttp://csr.asus.com/english/Takeback.htmfordetailrecycling
informationindifferentregion.
TheAdoptedTrademarksHDMI,HDMIHigh-DenitionMultimedia
Interface,HDMItrade dress andtheHDMI Logosaretrademarks
orregistered trademarks ofHDMI Licensing Administrator,Inc. in
the United States and other countries.
1-1 Chapter 1: Product Introduction
Chapter 1: Product Introduction
1.1 Welcome!
ThankyouforpurchasingtheASUS®OLEDGamingmonitor!
ThelatestwidescreenOLEDmonitorfromASUSprovidesacrisper,
broader,andbrighterdisplay,plusahostoffeaturesthatenhanceyour
viewingexperience.
Withthesefeatures,youcanenjoytheconvenienceanddelightfulvisual
experiencethatthemonitorbringstoyou!
1.2 Package Contents
Checkyourpackageforthefollowingitems:
 OLEDMonitor
Quick Start Guide
 WarrantyCard
1x Power Cord
 1xUltra-HighSpeedHDMICable
1x DisplayPort Cable
1x USB 3.2 Cable
1x Type-C Cable
 1xROGWallMountKit
ROG Pouch
ROG Sticker
 ColorCalibrationTestingReport
Ifanyoftheaboveitemsisdamagedormissing,contactyourretailer
immediately.
1-2
ROG Swift OLED PG49WCD Gaming Monitor
1.3 Monitor Introduction
1.3.1 Front View
1 2 3
1. Close button:
• ExittheOSDmenu.
• Turn on the OSD menu when the monitor enters standby mode
ordisplaythe"NOSIGNAL"message.
2. Control buttons:
• TurnontheOSDmenu.EnacttheselectedOSDmenuitem.
• Increase/Decrease values or moves your selection up/down/left/
right.
3. Power button:Turn the monitor on/off.
1-3 Chapter 1: Product Introduction
1.3.2 Back View
USB
90W
USB
90W
2 3 109187654
1
11
1. USB2.0 downstream ports:TheseportsareforconnectionwithUSB
2.0devices,suchasUSBkeyboard/mouse,USBashdrive,etc.
2. AC-IN port:Thisportconnectsthepowercord.
3. HDMI port:ThisportisforconnectionwithanHDMIV2.1compatible
device.
4. DisplayPort:ThisportisforconnectionwithaDisplayPort
compatible device.
5. USB type-C Port. This port is for connection with a USB type-C cable.
Theconnectionsupportsvideosignal(DPAltmode),powerdelivery,
and data transmission.
6.
• Theportoffersmax.20V/4.5A(including5V/3A,9V/3A,15V/3A,
20V/4.5A).USBType-Cportsupportspowerdeliveryanddata
transmission.ConnectingtheUSBtype-Ctotype-Acableonlyenables
theUSBtype-Aports(downstream)onthemonitor.
• Disclaimer:ConnectedUSBType-CDevicesneedtosupportDPAlt
mode.
7. USB3.2 Gen 1 downstream port:Whentheupstreamportis
connected. The connection enables the USB 3.2 port on the monitor
and power delivery 5V/1.5A.
8. Earphone jack:ThisportisconnectionwithanEarphone
(Impedance:32Ωat1kHz).
9. USB3.2 Gen 1 upstream port:ThisportisforconnectionwithaUSB
upstream cable. The connection enables the USB hub function on the
monitor.
10. USB3.2 Gen 1 downstream port:Whentheupstreamportis
connected. The connection enables the USB 3.2 port on the monitor
andpowerdelivery5V/0.9A.
1-4
ROG Swift OLED PG49WCD Gaming Monitor
11. SPDIF out (Optical Digital Audio Out):Thisoutputportisfor
connection with a device that includes an SPDIF input.
12. Kensington lock slot
1.3.3 GamePlus Function
TheGamePlusfunctionprovidesatoolkitandcreatesabettergaming
environmentforuserswhenplayingdifferenttypesofgames.The
crosshairoverlaywith6differentcrosshairoptionslettingyouchoosethe
onethatbestsuitsthegameyou'replaying.Therearealsoonscreentimer
and stopwatch you can position on the left of the display so you can keep
trackofthegamingtime;whiletheFPS(framespersecond)counterlets
youknowhowsmooththegameisrunning.Sniperfunction(onlyavailable
whenHDRisdisabledonyourdevice)iscustomizedforrst-person
shooters.Youcanselectthemagnicationratioandthetypeofalignment
in sequence.
ToactivateGamePlus:
1. Move the buttonright.
2. Move the buttonup/downtoselectamongdifferentfunctions.
3. Press the button or move the buttonrighttoconrmthe
function you choose, and move the buttonup/downtonavigate
throughthesettings.Movethe buttonlefttogoback,off,orexit.
4. Highlightthedesiredsettingandpressthe button to activate it.
Press the button to inactivate it.
GamePlus Main Menu GamePlus — FPS
Counter
GamePlus — Crosshair
(the crosshair will
changecolordepending
onthebackgroundcolor)
GamePlus
FPS Counter
Crosshair
Sniper
Timer
Stopwatch
Display Alignment
FPS Counter
OFF
Number
Bar Graph
Crosshair
Dynamic Crosshair
OFF
1-5 Chapter 1: Product Introduction
GamePlus — Sniper
Sniper
OFF
1.2x
1.2x
1.5x
1.5x
2.0x
2.0x
GamePlus — Timer
29:58
GamePlus — Stopwatch
00:02
GamePlus—DisplayAlignment
1-6
ROG Swift OLED PG49WCD Gaming Monitor
1.3.4 GameVisual Function
TheGameVisualfunctionhelpsyouselectamongdifferentpicturemodes
in a convenient way.
ToactivateGameVisual:
1. Move the button up.
2. Move the buttonup/downtoselectthedesiredsetting.
• Scenery Mode:Thisisthebestchoiceforsceneryphotodisplaying
with GameVisualTMVideointelligenceTechnology.
• Racing Mode:Thisisthebestchoiceforracinggameplayingwith
GameVisualTMVideointelligenceTechnology.
• Cinema Mode:Thisisthebestchoiceformoviewatchingwith
GameVisualTMVideointelligenceTechnology.
• RTS/RPG Mode:Thisis the bestchoiceforReal-Time Strategy
(RTS)/Role-PlayingGame(RPG)playingwithGameVisualTM Video
intelligenceTechnology.
• FPS Mode:ThisisthebestchoiceforFirstPersonShootergame
playingwithGameVisualTMVideointelligenceTechnology.
• sRGB Calibration Mode:Thisisthebestchoiceforviewingphotos
andgraphicsfromPCs.
• MOBA Mode:ThisisthebestchioceforMultiplayerOnlineBattle
Arena(MOBA)gamesplayingwithGameVisualTMVideointelligence
Technology.
• User Mode:MoreitemsareadjustableintheColormenu.
3. Press the buttontoactivatethesetting.
• IntheRacingMode,the6-axisSaturation,andVividPixelfunctionsarenot
user-configurable.
• In the sRGB, the Color Temp., 6-axis Saturation, and Contrast functions
arenotuser-congurable.DisplayColorSpacewillbelimitedonsRGBand
thescreensizewillnotaffectthescreenbrightness.
2-1 Chapter 2: Setup
Chapter 2: Setup
2.1 Attaching the Stand
1. Attachandxthebasetothearmbyfasteningthebundledscrew.
2. Alignandattachthestand(arm)totherearofthemonitor.
3. Need two people to place the monitor on a stable surface in the
uprightposition.
4. CarefullyremovethemonitorfromtheboxandEPSpackaging.
Avoidtiltingthemonitorbackwardorforwardwhenunboxingit.
5. Placethemonitoronastablesurfaceintheuprightposition.
Removetheprotectiveplasticbag.
2-2
ROG Swift OLED PG49WCD Gaming Monitor
2.2 Cable Management
Youcanorganizethecablesbyarrangingthemasshownintheillustration
below:
USB
90W
USB
90W
2.3 Detaching the Stand (for VESA wall mount)
ThedetachablestandofthismonitorisspeciallydesignedforVESAwall
mount.
1. Pressthereleasebuttontodetachthestand(arm)fromthemonitor.
2. Remove the stand. Then install the wall mount bracket on the rear of
the monitor.
• TheVESAwallmountkit(100x100mm)ispurchasedseparately.
• UseonlytheULListedWallMountBracketwithminimumweight/load
22.7kg(screwsizeisM4x10mm).
2-3 Chapter 2: Setup
2.4 Connecting the Cables
Connectthecablesasthefollowinginstructions:
USB
90W
USB
90W
• To connect the power cord:
a. Connect one end of the power cord to the monitor’s AC IN input and
the other end to a power outlet.
• To connect the DisplayPort/HDMI cable:
a.PlugoneendoftheDisplayPort/HDMIcabletothemonitor’s
DisplayPort/ HDMI port.
b. Connect the other end of the DisplayPort/HDMI cable to your
computer'sDisplayPort/HDMIport.
2-4
ROG Swift OLED PG49WCD Gaming Monitor
• To use the USB type-A/B ports:TakethesuppliedUSB3.2cable,
andplugthesmallerend(type-B)oftheUSBupstreamcabletothe
monitor’sUSBupstreamport,andthelargerend(type-A)toyour
computer’s USB 3.2 port. Make sure your computer is installed with the
lastestWindows10/Windows11operatingsystem.Thatwillenable
the USB hub function on the monitor to work.
• To use the USB type-C port:
a.PlugoneendoftheUSBtype-Ccabletothemonitor’sUSBtype-C
port.
b.ConnecttheotherendoftheUSBtype-Ccabletoyourdevice's
USB type-C port.
• To connect the S/PDIF Optical Digital audio cable:Connectthe
speaker to the monitor’s SPDIF out port.
• To use the earphone:Connecttheendwith3.5mmaudiojacktothe
monitor’s earphone jack.
• To use the USB2.0 port for firmware upgrade at down side:Save
thenewfirmwaretothediskdrive.Thenplugthediskdrivetothe
monitor’s downstream port . Follow the on-screen instructions to
upgradethefirmware.
2.5 Turning On the Monitor
Press the button on the monitor to turn on the monitor.
If the Power Indicator function is enabled and an input source is detected,
thepowerLEDwilllightupredtoindicatethatthemonitoristurnedon.
ThepowerLEDwillnotlightupinPowerSavingmode.
2-5 Chapter 2: Setup
2.6 Adjusting the Monitor
• Foroptimalviewing,werecommendthatyoulookatthefullfaceofthe
monitor,thenadjustthemonitortotheanglethatismostcomfortable
for you.
• Holdthestandtopreventthemonitorfromfallingwhenyouchangeits
angle.
• Youcanadjustthemonitor'sanglefrom-5°to20°anditallows15°
swiveladjustmentfromeitherleftorright.Youcanalsoadjustthe
monitor'sheightwithin±100mm.
-5°
20°
100mm
15° 15°
3-1
ROG Swift OLED PG49WCD Gaming Monitor
Chapter 3: General Instructions
3.1 OSD (On-Screen Display) Menu
3.1.1 How to Recongure
Usethecontrolbuttonsonthemonitortonavigatethroughthemenu
and make adjustments.
Gaming
Image
Color
Input Select
PIP/PBP
ROG SWIFT PG49WCD
Racing Mode
GameVisual
DisplayPort
Input Source
OFF
HDR
5120 x 1440 144Hz
Variable Refresh Rate
GamePlus
GameVisual
Shadow Boost
Back Enter ExitVolume 50
Tonavigatethroughthemenuandmakeadjustments,dothe
following:
1. Press the button to activate the OSD menu.
2. Move the buttonup/downtonavigatethroughthefunctions.
Highlightthedesiredfunctionandpressthe button to activate
it. If the function selected has a sub-menu, move the button up/
downagaintonavigatethroughthesub-menufunctions.Highlightthe
desired sub-menu function and press the button or move the
buttonrighttoactivateit.
3. Move the buttonup/downtochangethesettingsoftheselected
function.
4. To exit and save the OSD menu, press the button or move the
button left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1 to 3.
3-2 Chapter 3: General Instruction
3.1.2 OSD Function Introduction
1. Gaming
Configureyourgamingpreferences.
Gaming
Image
Color
Input Select
PIP/PBP
ROG SWIFT PG49WCD
Racing Mode
GameVisual
DisplayPort
Input Source
OFF
HDR
5120 x 1440 144Hz
Variable Refresh Rate
GamePlus
GameVisual
Shadow Boost
Back Enter ExitVolume 50
Variable Refresh Rate (DisplayPort/HDMI only):Allowsan
VariableRefreshRatesupportedgraphicssourcetodynamically
adjust display refresh rate based on typical content frame rates
forpowerefcient,virtuallystutterfreeandlow-latencydisplay
update.
• This function can only be activated within 48Hz~144Hz for
HDMI and DisplayPort.
• For supported GPUs, minimum PC system and driver
requirements, please contact the GPU manufactures.
• WhenVariableRefreshRatefunctionisgreyedout,change
AspectControlto32:9.VariableRefreshRateisnotsupported
inothersettings.
GamePlus:Configurethegamingenvironment.See1.3.3
GamePlus Function for details.
GameVisual:Selectthepicturemode.See1.3.4
GameVisual Function for details.
Shadow Boost:Adjustthemonitorgammacurvetoenrichthe
darktonesinanimage,makingdarkscenesandobjectsmuch
easier to be seen.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

Asus ROG Swift OLED PG49WCD User guide

Category
TVs & monitors
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI