Pro-face Screen Protection Sheet Attachment Operating instructions

  • Hello! I have reviewed the provided document describing the Screen Protection Sheet installation guide. This document outlines instructions on how to install the screen protector, its specifications, chemical resistance and warnings. I am ready to answer your questions about this product.
  • What is this sheet for?
    What should I do when the sheet gets scratched?
    How often should I replace the sheet?
    What not to use when attaching or removing the sheet?
Screen Protection Sheet Installation Guide
https://www.pro-face.com/
The information in this document is subject to change without notice.
Copyright © 2021.12 Schneider Electric Japan Holdings Ltd. All Rights Reserved.
EAV49597 01
Be aware that the Digital Electronics Corporation shall not be held liable for any real or estimated
damages or losses, or third party claims resulting from the use of this product.
Note
Specifications/Characteristics
1
2
3
4
How to Attach
Clean the screen thoroughly with a soft
cloth (use either water or a neutral
detergent to remove tougher stains).
Remove the sheet's protective film.
Peel off the backing sheet slightly to
expose the sheet's adhesive surface.
Start at the top of the screen, slowly
attach the sheet while peeling off the
backing sheet.
Anti-glare
Sheet
Backing sheet
Protective
film
Hexane, kerosene, engine oil, diesel oil, lubrication oil,
glycerine, acetone, acetic anhydride, benzene
Ammonia, sulfur dioxide, potassium hydroxide,
caustic soda, nitro benzene
Chemical
resistance
level
Protects against
Does not protect
against
Sheet material : Polyester film
NOTICE
This sheet is a disposable sheet that protects the screen and prevents it from becoming dirty.
• Both sides of this sheet are matte processed to suppress reflections from ambient light.
• This sheet does not interfere in any way with the touch panel's normal touch operation.
Package contents: Screen Protection Sheet x 5 sheets
Notes
• In humid environment, condensation may form between the screen and the sheet.
• The sheet is not designed to protect against sharp or hard objects.
• When scratches form on the surface of the sheet, the effectiveness of its performance is
reduced. Please replace the sheet with a new one.
• When dirt and smudges on the sheet begin to reduce the screen's visibility, please
replace the sheet with a new one. We recommend replacing this sheet once a year.
• When disposing off the sheet, be sure to do so according to your country’s standards for
industrial waste disposal.
DAMAGE OF THE SCREEN
Do not use a sharp object (such as the tip of a mechanical pencil or a screwdriver) or hard
object to attach or remove the sheet.
Failure to follow these instructions can result in equipment damage.
/