Assembly Instructions
SURU
10" Pendant Lamp
VERSION 1.0
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
SURU 10" Pendant Lamp Page 2 of 5
5
PARTS INVENTORY
ID DESCRIPTION QTY
CROSSBAR BRACKET 1
LONG SCREW 2
WIRE NUT 3
SHORT GREEN SCREW 1
PENDANT LAMP WIRE 1
CANOPY PLATE 1
MEDIUM SCREW 2
BULB 1
DIFFICULTY
30 min
TIME
# OF PEOPLE REQUIRED TOOL
Consultation with a professional electrician is
recommended for the installation of this pendant lamp.
Page 3 of 5
1
2
CAUTION
Turn o power at main circuit panel
before starting installation.
Thread wires through crossbar bracket
(A) before attaching to junction box.
!
SURU 10" Pendant Lamp
Page 4 of 5
3
Match up wires by color and
attach with wire nuts (C).
BLACK: Live
WHITE: Neutral
!
Attach ground wire from junction box to
small green screw (D) on crossbar.
!
4
Loosen screw on clamp to
adjust length of wire (E) and
tighten to secure.
!
SURU 10" Pendant Lamp
Page 5 of 5
5
6
SURU 10" Pendant Lamp
/
