Page is loading ...
Assembly Instructions
ARDEO
Pendant Lamp
VERSION 1.0
Page 2 of 5
ARDEO Pendant Lamp
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
30 min
5
PARTS INVENTORY
ID DESCRIPTION QTY
TOP COVER 1
METAL FRAME 1
MOUNTING BRACKET 1
MOUNTING SCREW 2
SHORT GREEN SCREW 1
WIRE NUT 3
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
CANOPY 1
PLASTIC WASHER 1
SCREW NUT 1
BULB E26 G45 4W LED 1
GLASS SHADE 1
TIME # OF PEOPLE DIFFICULTY
Page 3 of 5
ARDEO Pendant Lamp
1
2
CAUTION!
Turn o power at main circuit
panel before starting installation.
Thread wires through mounting
bracket (C) before attaching to the
junction box with mounting bolt (D).
!
#
#
Page 4 of 5
ARDEO Pendant Lamp
3
4
If junction box does not have a green
ground wire, attach ground wire from
lamp to short green screw (E) on
mounting bracket.
!
Match up wires by color and
attach with wire nuts (F).
BLACK: Live
WHITE: Neutral
GREEN OR BARE COPPER: Ground wire
#
#
Page 5 of 5
ARDEO Pendant Lamp
5
6
/
