GHM UBX-025 The GHM UBX-025 is a flow monitor that detects the volume flow in fluid media and actuates the microswitch according to the pre-adjusted rate. It works according to the paddle / folding bellows principle, where the medium flowing through the line pushes the paddle and moves it in the direction of the flow against spring force, actuating a microswitch. The UBX-025 is suitable for use in machines and systems and for use of media of Fluid Group II in accordance with Directive 2014/68/EU. It is not designed for operation with gaseous media. The device can be used to ensure the provision of a minimum supply of lubricant or coolant, or to monitor increasing flow values. The switching points can be adjusted to meet the specific requirements of the application.
GHM UBX-025 The GHM UBX-025 is a flow monitor that detects the volume flow in fluid media and actuates the microswitch according to the pre-adjusted rate. It works according to the paddle / folding bellows principle, where the medium flowing through the line pushes the paddle and moves it in the direction of the flow against spring force, actuating a microswitch. The UBX-025 is suitable for use in machines and systems and for use of media of Fluid Group II in accordance with Directive 2014/68/EU. It is not designed for operation with gaseous media. The device can be used to ensure the provision of a minimum supply of lubricant or coolant, or to monitor increasing flow values. The switching points can be adjusted to meet the specific requirements of the application.
GHM UBX-025 The GHM UBX-025 is a flow monitor that detects the volume flow in fluid media and actuates the microswitch according to the pre-adjusted rate. It works according to the paddle / folding bellows principle, where the medium flowing through the line pushes the paddle and moves it in the direction of the flow against spring force, actuating a microswitch. The UBX-025 is suitable for use in machines and systems and for use of media of Fluid Group II in accordance with Directive 2014/68/EU. It is not designed for operation with gaseous media. The device can be used to ensure the provision of a minimum supply of lubricant or coolant, or to monitor increasing flow values. The switching points can be adjusted to meet the specific requirements of the application.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI