5.17
6.89
6.19
4X
.163 THRU
AMPS BOLT PATTERN
4X
.213 THRU
VESA 75MM BOLT PATTERN
4X
.265 THRU
2.13 SQ. BOLT PATTERN
2.75
C-DMM-123
(SHOWN FOR REFERENCE)
4X
1/4-20 X 1/2 HEX HEAD BOLT
AND WASHER.
1.96
ROTATING
PLATE
SANDWICH
WASHER
1/4" PLASTIC
WASHER
1/4" FLAT
WASHER
1/4-20 NUT,
NYLOCK
SPRING
WASHER
INSTALLATION:
REMOVE ORIGINAL TILT-SWIVEL FROM DMM DOOR.
1.
INSTALL C-MD-208 USING THE ORIGINAL 1/4-20 HEX HEAD
2.
SCREWS, WASHERS AND FLANGED NUTS.
INSTALL EQUIPMENT TO ROTATING PLATE.
3.
NOTE: MOUNTING HOLES MAY BE ACCESSED BY ROTATING THE PLATE,
OR THE ROTATING PLATE MAY BE REMOVED FROM THE ASSEMBLY TO
ALLOW EASIER INSTALLATION OF THE EQUIPMENT.
POSITION EQUIPMENT AS DESIRED.
4.
75 JACKSONVILLE RD,
WARMINSTER, PA. 18974
1-800-524-9900
SIZE
SCALE: 1:4
SHEET 1 OF 1
DO NOT SCALE DRAWING
WEIGHT (LB): 0.78
TITLE:
DWG. NO.
C-MM-304-INST
REV
A
7-14
HAVIS, INC.
INSTALLATION INSTRUCTION,
C-MM-304
/