Kraun Top Value Laser Mouse Installation guide

Category
Mice
Type
Installation guide

Kraun Top Value Laser Mouse is the latest technology in the mouse industry. The LASER can work on very fine surfaces that the optical can not do. Here is some basic information.

  • Wired 5 buttons with scrolling wheel LASER mouse
  • Selectable resolution: 1,000/ 2,000 DPI
  • 9,600 frames per second frame rate
  • Compatible with Windows 98SE/ ME/ 2000/ XP; MAC OS 8.9, 9.x; 10.x.

Kraun Top Value Laser Mouse is the latest technology in the mouse industry. The LASER can work on very fine surfaces that the optical can not do. Here is some basic information.

  • Wired 5 buttons with scrolling wheel LASER mouse
  • Selectable resolution: 1,000/ 2,000 DPI
  • 9,600 frames per second frame rate
  • Compatible with Windows 98SE/ ME/ 2000/ XP; MAC OS 8.9, 9.x; 10.x.
C M Y CM MY CY CMY K
Top Value Laser Mouse
Quick Guide
Guida Rapida
Cod. KR.A2
Cod. KR.A3
www.Kraun.it
C M Y CM MY CY CMY K
www.Kraun.it
Quick Guide
1. Getting Started
Congratulations on your purchase of high resolution 5 buttons
LASER Mouse. LASER mouse is the last technology of mouse industry.
The LASER can work on very fine surface that the optical can not
do. And the LASER technology is doing a revolution in mouse
industry.
2. Package Contains
Your Mouse package includes the following:
1. LASER Mouse
2. Quick Guide
3. Mini-CD Driver
Note: If any part is missing, please contact your dealer for a
replacement immediately.
3. Important Ergonomic Information
Some experts believe that using any mouse or trackball may cause
serious injury to hands, wrists, arms, neck, or back. If you feel pain,
numbness, or weakness in these areas, see a qualified health
professional.
C M Y CM MY CY CMY K
www.Kraun.it
Quick Guide
3.1 To reduce the risk of injury, follow these precautions:
Take frequent breaks, get up and walk around several times
every hour.
Vary your tasks throughout the day.
Keep your shoulders relaxed with your elbows at your side.
Position your keyboard and mouse so you do not have to reach.
Adjust your chair and keyboard so your upper arms and wrists
are straight.
Avoid resting your wrists on sharp edges.
System Requirement
Mouse compatible with standard Microsoft OS
No driver issue in Windows 98SE/ NT/ ME/ 2000/ XP
3rd button and wheel function require Win98/ ME/ 2000/ XP
USB port need the original Windows CD to active in Windows
98SE
If your computers operating system is Windows 98/ 98SE,
please prepare the Windows98 or 98SE compact disk for
systems request during the installation of mouse.
Compatible with Mac 8.9, 9.x, 10.x.
C M Y CM MY CY CMY K
www.Kraun.it
Quick Guide
Before you begin
Keep this installation guide for future reference! It contains
Important Troubleshooting Information.
Keep your old PS/2 or USB mouse as back-up devices.
The product is LASER Class I qualified
DO NOT look at the LASER to avoid any physical damage.
General Feature
1. Low power high performance 850nm invisible LASER light
2. Wired 5 buttons with scrolling wheel LASER mouse
3. Selectable resolution: 1,000/ 2,000 DPI
4. 9,600 frames pre second frame rate
5. Special design LASER holder
6. Compatible with Windows 98SE/ ME/ 2000/ XP; MAC OS 8.9,
9.x; 10.x.
Hardware Installation
Step 1. Plug the USB plug to Computer
1.1 USB is a PnP device; you can plug the device no matter
the computer is on or off. Of course, you can remove
USB device in the same way.
2.1 If the device is HDD or pen drive or any device which
can store files, stop the device than remove is the
best way to protect the files.
C M Y CM MY CY CMY K
www.Kraun.it
Quick Guide
3.1 The suggestion is to turn the computer off than plug
the device in or out.
Step 2. Using mouse as usual, after its recognized by the
computer.
Note: Please remove the transparent label on the mouse bottom
before using the mouse.
2.1 Drivers: To use the functions of the additional buttons,
please install the drivers contained in the Mini-CD
inside the package.
2.2 DPI select: The resolution can be swapped between
1,000 DPI and 2,000 DPI by press and hold 1st and
2nd button (left and right button) for 3 sec. The default
resolution is 2,000 DPI.
General Specifications
Dimension:93 × 47 × 39.5 mm (L*W*H)
Weight:70.6g
Power:USB, 5V
Low Power consumption:~35mA
Resolution: selectable 1,000 / 2,000 dpi
High-tech LASER mouse
C M Y CM MY CY CMY K
www.Kraun.it
Quick Guide
Standard 5 buttons with scrolling wheel design
Left and right hand ergonomic design for comfortable grip.
Compatible with Win 98/2000/ME/XP
CE certificate
LASER Class I product.
Troubleshooting
1. Mouse does not function
If mouse is not functional, please turn off the computer
first.
Q: The mouse cursor can only move left & right during
operation
A: Please try to remove the device and plug it again.
2. Mouse movement is not smooth
Since the laser chart eristic (very small beam & high
sensitivity), cursor may not move smoothly on certain rough
surfaces. Please try other surface and check again.
This mouse is not designed to work on glass. While working
on most of shining surfaces, its performance is much better
than other traditional optical mice.
C M Y CM MY CY CMY K
www.Kraun.it
Warning
The manufacturer is under no circumstances liable for any
unauthorised modifications made to the product by the user or
any other parties which may compromise its conformity and safety.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Kraun Top Value Laser Mouse Installation guide

Category
Mice
Type
Installation guide

Kraun Top Value Laser Mouse is the latest technology in the mouse industry. The LASER can work on very fine surfaces that the optical can not do. Here is some basic information.

  • Wired 5 buttons with scrolling wheel LASER mouse
  • Selectable resolution: 1,000/ 2,000 DPI
  • 9,600 frames per second frame rate
  • Compatible with Windows 98SE/ ME/ 2000/ XP; MAC OS 8.9, 9.x; 10.x.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI