Page is loading ...
SANWA Wired Trackball
Laser Mouse
User's Guide
GMATB44BKN
User’s Manual YouTube
Troubleshooting
Q.The mouse cursor movement is not smooth.
A. Although the laser engine is a high performance sensor, there are times when the cursor does not
move smoothly when used on a surface that reflects light, such as a mirror, or a transparent surface
such as glass.
Also, the tracking performance may degrade on regularly patterned surfaces.
Q. Trackball does not work.
A. If you are experiencing erratic movement when you use your trackball, it may be due to the following:
Jittering or random movements.
Likely cause:
Dirty trackball sensor
Damaged or dirty trackball
Possible solutions:
Make sure the battery is fully charged. Low or dead batteries can affect trackball movement.
Turn off your trackball or unplug the trackball from the computer and try cleaning the sensor on the
bottom with compressed air or a cotton swab and clean the trackball with a soft cloth.
Upgrade the firmware for your device if one is available.
Windows only — check if there are any Windows updates running in the background that may cause
the delay.
Mac only — check if there are any background updates that may cause the delay.
Try your device on a different computer.
Problems specific to Mac products
Q.The forward and backward scroll movements on Mac are reversed.
A. Please try the following method:
(1) On the Apple menu, select “Current System Settings”.
(2) Select “mouse”.
(3) Deselect the “Scroll Direction: Natural” check box.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on the user is encouraged to try to correct the interference byone or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Contact Us [email protected]
Congratulations on your purchase of this most innovative wired trackball laser mouse. Equipped with
Auto-Speed technology, the mouse can automatically adjust the cursor speed to precisely get to the
point you want. Furthermore, just rolling the ball to freely control the cursor movement, no need to
move the mouse, can reduce the use of the wrist and the incidence of carpal tunnel syndrome. It
offers more advance that will make you more productive and more comfortable.
Using state-of-art technology. High tracking speed and sensitivity.
Auto-Speed technology. - automatically adjust your cursor speed to precisely get to the point you want.
Ergonomic design to support your hand in comfort.
4-way scrolling.
Ergonomic design.
400/800/1200/1600 dpi switchable.
2 side buttons for Internet Explorer Forward & Backward.
Mouse
Features
Introduction
1.Hardware Installation
a. Turn on your PC.
b. Connect the receivere to USB port on PC.
Wheel button
Dpi button
Forward button
Backward button
Trackball
This product complies with IEC 60825-1, Class I laser product.
The product complies with FCC and CE rules.
Safety Notice
Please do NOT direct the laser beam at
anyone's eye after the ball is taken out.
2. 4-Way Scrolling:
a. Vertical Scrolling
Roll wheel up to scroll up; roll wheel down to scroll down.
b. Horizontal Scrolling
Hold the wheel to left to scroll left; hold the wheel to right to scroll right.
Release wheel to stop scrolling function.
Note
The 4-way scrolling function depends on applications. If the application support the 4-way scrolling function,
then the mouse will perform it.
3. Red LED as DPI indicator
Blink once when switched to 400 dpi
Blink twice when switched to 800 dpi
Blink 3 times when switched to 1200 dpi
Blink 4 times when switched to 1600 dpi
Red LED indicator
4. Clean the trackball
You may use a pen, through the hole at the mouse
bottom, to push out the trackball and clean it.
PC
USB port
Important Notes
Please follow the instructions contained in the instruction manual. Do not try to
disassemble or replace parts in the product.
Do not put the product in water or no any wet surface; if this occurs quickly remove from
the computer and take to your nearest dealer for repair.
To avoid electrocution, please do not pick up the device when your hands are wet.
Do not put the product near a heat source or put the product in high temperatures.
/