Blodgett 40GS-KLS Datasheet

Brand: Blodgett

Model: 40GS-KLS

Type: Datasheet

Blodgett 40GS-KLS is a 40-gallon (151 liters) gas short height stationary kettle with a fully jacketed 316 stainless steel, one-piece welded construction. It is ASME shop inspected, stamped, and registered with the National Board for operation up to a maximum working pressure of 30 PSI. The unit is UL listed for sale in the USA and Canada and is registered in Canada with a CRN number.

The kettle is gas-heated and has a self-contained steam source that provides temperatures of 150 to 270°F. It has a gas regulator valve and electronic ignition module and is thermostatically controlled to shut off automatically when the desired temperature is reached or turn on when the temperature falls below the desired setting.

Project

Item No.

Quantity

 Model 40GS-KLS - 40 gallon (151 litres) gas short height stationary kettle

CONSTRUCTION

 316 stainless steel, one-piece welded construction

 Fully jacketed kettle

 All exposed surfaces shall be stainless steel

 Kettle body is sheathed in stainless steel and air gap insulated.

 ASME shop inspected, stamped and registered with the National Board

for operation up to a maximum working pressure of 30 PSI. Unit shall be

UL listed for sale in USA and Canada. Unit shall be registered in Canada

with a CRN number.

 Outer sheathing and air insulating gap retains heat and keeps kettle

exterior cooler to the touch.

OPERATION

 Gas-heated, self-contained steam source provides temperatures of 150

to 270°F

 Gas regulator valve and electronic ignition module

 Thermostatically controlled to shut off automatically when desired tem-

perature is reached or on when temperature falls below desired setting

 Factory charged with chemically-pure water and rust inhibitors to ensure

long life and minimum maintenance

 All controls are front mounted in easy reach of the operator

 Regulating thermostat

 Pressure gauge

 Power on/off switch

 Heat, power and lower water indicator lights

 Water level sight glass

 Pressure safety relief valve

 Pressure limit control

 Low water cut-off

STANDARD FEATURES

 One-piece domed cover with counter balanced spring-assist

 Faucet bracket

 2” sanitary tangent drawoff

 Removable 1/4” perforated stainless steel strainer

 One year parts and labor warranty*

* For all international markets, contact your local distributor.

BLODGETT

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183

OPTIONS AND ACCESSORIES

(AT ADDITIONAL CHARGE)

 Etched markings

 Gallons

 Litres

 Strainer

 1/8” perforated disc strainer

 1/4” perforated disk strainer

 Solid disc strainer

 Basket inserts

 Swing faucets

 Automatic water filler

 3” tangent drawoff

 Kettle brush kit

 Contour measuring strip

40GS-KLS

Short Height Gas Tri-Leg Stationary Kettle

40GS-KLS SHORT HEIGHT STATIONARY KETTLE

BLODGETT

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183

40GS-KLS TRI-LEG STATIONARY KETTLE

Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY

NOTE: The company reserves the right to make substitutions of

components without prior notice.

54.25

(1327)

27.13

(638)

2 (51)

min side

clearance

6 (152) dia

draft diverter

flue outlet

4 (102) rear

clearance

2 (51)

min side

clearance

4.75 (121)

43.25 (1099)

4 (102)

3.75

(171)

TOP VIEW

30.38

(772)

Kettle

Leg Position

30°

NOTES:

1. Dimensions are inches (mm).

2. Minimum distance from combustible

walls: 2 (51) on sides and 4 (102) from

rear. Blodgett recommends 8 (203) on

right side for servicing.

18 (457) flue height

(965)

rim height

(635)

Faucet

bracket

7 (178)

FRONT VIEW

Adjustable

bullet feet

71.75

(1822)

w/cover

open

21.38

(543)

7.5 (191)

6 (152)

Gas connection

7/8” dia

Electrical connection

9.5

(241)

2 (51)

tangent

draw off

Cover open

(not shown in

other views)

32.38 (822) O.D.

26 (660) I.D.

RIGHT SIDE VIEW

APPROVAL/STAMP

P/N S00146 Rev A (4/11)

SHORT FORM SPECIFICATIONS

Provide Blodgett model 40GS-KLS (40 gallon)short height gas heated, stainless steel, fully steam jacketed kettle. Unit shall include 2” sanitary tangent draw-off valve, and No. 51 spring

assisted cover. Steam jacket is insulated and ASME code constructed for maximum working pressure of 30 PSI. Unit is thermostatically controlled, with electronic ignition as standard.

CSA design certified and NSF listed. Provide options and accessories as indicated.

MAXIMUM INPUT: Natural Gas Propane

40GS-KLS 100,000 BTU 85,000 BTU

GAS SUPPLY:

1/2" NPT connection required. A gas shut-off valve must be installed in

supply piping convenient and adjacent to unit.

Inlet Pressure:

Natural 4.5" W.C. min, 14” W.C. max

Propane 11" W.C. min, 14” W.C. max

ELECTRICAL CONNECTION:

Requires one 115 Volt, single-phase, 60 HZ, 2 AMP supply.

SHIPPING INFORMATION: