Applications
Meats
Soups
Stews
Sauces
Pie fillings
Pudding
Beans
Powdered mixes
Icings
Custards
Stainless Steel
2/3 Steam Jacketed
Cooker/Mixer
Floor-Mounted
Tilting,
Self-Contained,
Gas-Heated
40 or 60-Gallon
Capacity with Tilt-Out
Twin Shaft Agitator
Short Form
Groen Model DHT-40 or 60,
TA/3, (specify gallons) self-
contained, gas-heated, (spec-
ify natural or propane) tilting,
stainless steel, steam jacketed
cooker mixer, with twin shaft
tilt-out agitator scraper mixer.
Twin shaft agitator assembly
standard, with multiple scrap-
ing fingers and the second
agitator is counter rotat-
ing mixer. Base shall house
smooth-action positive lock,
manual-tilt assembly. 316
stainless steel kettle interior
has solid, one-piece, welded
construction with heavy-duty
reinforced rim and butterfly-
shaped pouring lip. Twin shaft
agitator mounted on console
with mechanically assisted
manual tilt-out and positive
quick-action rim lock and
latch. Unit is standard with
2” TDO valve and etch marks.
Kettle NSF-listed, ASME code
constructed for 50 PSI, Kettle
shall be CSA design certified
(natural and propane gas only).
1/2” NPT gas line, 115 Volt
electric service for kettle, 208
Volt, 1 or 3-phase for agitator
motor. Made in USA.
Cooker/Mixer
models DHT-40 TA/3 & DHT-60 TA/3
Groen Cooker/Mixer, Page 5
143942D
Revised 08/09
Description
Cooker/Mixer Kettle shall be a Groen Model DHT-40 or
60, TA/3 (specify 40- or 60-gallon) stainless steel, self
contained 2/3 steam jacketed unit operating from a gas-
heated steam source contained within unit, complete with
console-mounted tilt-out twin shaft scraper mixer.
Construction
Kettle interior shall be of type 316 stainless steel, solid
one-piece welded construction. The control console and
kettle exterior shall be 304 stainless steel. The kettle
body shall be mounted on a heavy-duty stainless steel,
combination kettle support tilt trunnion, which, is sup-
ported by the polished stainless steel enclosed base. The
kettle shall be furnished with heavy-duty reinforced rim
with a butterfly-shaped pouring lip for maximum sanita-
tion and ease of pouring. The base shall be provided with
stainless steel tubular legs with adjustable bullet feet.
The enclosed support base shall contain a self-locking
worm and gear tilt mechanism, controls, etc., and shall
be of sanitary, drip-proof construction with interior readily
accessible for installation or maintenance. Unit includes
2” TDO, 10-Gallon etch markings and double pantry
faucet.
Agitator Assembly
Enclosed transfer case to be cast aluminum with a 3- to-1
gear ratio. Gear motor to be completely enclosed-type,
cast iron housing, right angle shaft down, helical bevel
gearing, variable-speed motor driven through an elec-
tronic speed control. See table on back for minimum and
maximum agitator speeds.
Main agitator to be anchor type, shaped to the contour
of the kettle and provided with removable nylon finger
scrapers. The secondary counter-rotating bar type agita-
tor shall be centrally-located between the center shaft
and the outside arms of the main agitator. Both agitators
are attached with bayonet connections for easy, quick
removal for cleaning or when kettle is to be used without
the mixing mechanism. Both agitators are 304 stainless
steel and either can be used alone.
Agitator and motor drive assembly can be manually tilted
to the right side of the kettle.
Finish
Kettle interior shall be polished to a 180 emery grit finish.
Kettle exterior shall be finished to a bright semi-delux fin-
ish, ensuring maximum ease in cleaning and maintaining
brilliant appearance.
ASME Code, and CSA Certification
Unit shall be ASME shop-inspected, stamped and reg-
istered with the National Board for operation up to a
maximum working pressure of 50 PSIG. Kettle shall be
design certified by CSA America for use with natural gas
or LP gas.
Sanitation
Unit shall be designed and constructed to be NSF listed,
meeting NSF requirements.
Self-Contained Steam Source
Kettle shall have an gas-heated (natural or propane), self-
contained steam source to provide kettle temperatures
of 150°F to approximately 295°F. Unit shall be factory-
charged with water and rust inhibitors to ensure long life
and minimum maintenance.
Controls
Controls shall include a thermostat, pressure gauge, water
sight glass, a gas regulator valve and electronic ignition.
Power ON switch, power ON indicator light, low water
indicator light, agitator ON-OFF switch, motor speed control
and double-pantry faucet with bracket. Electronic ignition
to standing pilot is standard on all models.
Agitator to be of electronic, variable speed control-type
capable of operating at any RPM between minimum and
maximum settings.
Safety Features
Kettle shall have safety cut-off (turns off heat when tilted
to 10° and above), pressure relief valve, high limit pressure
switch and low water cut-off, 24Volt control system and
agitator safety tilt cut-off.
Options/Accessories
Disk Strainers (Not to be used with agitator)
240, 480 Volt Power Supply
Kettle Brush Kit
Pan Carrier
Gallon Master
Basket Insert
Lip strainers
Contour measuring strips
Installation Requirements
Specify natural or propane gas. Unit requires 1/2 “ NPT
gas line connection, 115Volt, 60Hz power for kettle and 208
Volt (3-phase only) power for agitator motor. No remote
steam source required.
Origin of Manufacture
Cooker/Mixer shall be designed and manufactured in the
United States.
Model DHT-60, TA/3 shown
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
143942
Revised 10/05
Stainless Steel
2/3 Steam Jacketed
Cooker/Mixer
DHT-40
or
-60,TA/3
DI Foodservice Company
1055 Mendell Davis Drive
Jackson, MS 39272
difoodservice.com
Telephone (601) 372-3903
Toll Free (800) 676-9040
FAX (601) 373-9587
info@groen.com
Due to continuous product improvement, designs are subject to change without notice.
16-1/2
749
879
1025
387
546
1854
1613
1460
749
362
318
G
73
29-1/2
14-1/4
12-1/2
L
M
K
63-1/2
57-1/2
H
J
D
40-3/8
15-1/4
21-1/2
F
E
29-1/2
42-1/4
C
B
2070
81-1/2
31-1/2
12-3/8
314
419
800
68-3/4
61-1/2
1746
1562
1121
44-1/8
23-1/2
13-1/4
597
337
31
44-1/8
927
787
MM
660
DIM.
MODEL
40 GAL.
INCH
26A
TABLE OF DIMENSIONS
60 GAL.
INCH
30
MM
762
AGITATOR MOTOR DATA SPECIFICATIONS
27
54
RPM MAIN
MINIMUM
MAXIMUM
H.P.
1-1/2 150
75
RPM SECONDARY 240V 3PH
4.8 A
2.8 A
480V 3PH
2.4 A
1.4 A
23
462 120
60
6.2 A
3.6 A
3.1 A
1.8 A
MINIMUM
MAXIMUM
208V 3PH
5.3 A
3.1 A
6.9 A
4.0 A
ELEC. LOAD RATING
GAL
40
GAL
60
59 A
105 A
61 A
29 A480 V
3 PH
240 V
24 KW
LOAD
101 A
VOLTAGE PHASE
1 PH208 V
KETTLE POWER ELECTRICAL TABLE
POWER
21 KW
3 PH
1 PH
3 PH
47
(1194)
29
(737)
A ID
G
CLERANCE INCLUDING
HANDLE & LATCH DEVICE
6 MIN
(152)
7-1/2" MAX.
(191)
6-1/2
(165)
26
(257)
2-3/16
(165)
B
3-1/2
(89)
K
MIN. POUR PATH
KETTLE IN
TILTED POSITION
E
2"
TANGENT DRAWOFF
(OPTIONAL)
ELECTRICAL CONNECTION
FOR KETTLE 1" IPS
ADJUSTABLE FEET
J
MAX. POUR PATH
6 MIN (152)
REAR WALL
CLERANCE
WALL
6
(152)
ELECTRICAL
CONNECTION
FOR MIXERS
3/4" IPS
13 1/16
(332)
140906 REV. A
2
4
3
9-1/4
(235)
2
1
6 (152)
MIN.
SIDE WALL
CLERANCE
1
CONTROL BOX MAY BE
MOUNTED REMOTELY TO
AN ADJACENT WALL
(BY CUSTOMER)
C
11 5/8
(295)
36 7/8
(937)
F
4 1/2
(114)
3 1/2
(89)
1 1/4
(32)
MM
1194
749
673
879
654
40 GAL / 152 LITRES
CAPACITY (GALLONS/LITRES)
TABLE OF DIMENSIONS
463
1095
711
349
787
1537
743
INCOMING GAS PRESSURE TABLE
G
F
ELECTRICAL CONNECTION
7/8" DIA. HOLE
115/1/60, 5 AMPS
B
J
POUR PATH MAX.
6"MIN. [152]
7-1/2" MAX.
[191]
2-3/16" [56]
6"
[152]
H
KETTLE IN
FULL TILT
POSITION
POUR PATH MIN.
M
L
K
6-1/2"
WALL
6"MIN.
[152]
LEFT SIDE
CLEARANCE
1-13/16"
[46] TYP
4-5/8"
[117]
A
ID
2" [51]
2"
[51]
TYP.
65425 29
C
1. 2" TANGENT SANITARY DRAW-OFF
2.LIFTOFF COVER MODEL #31 FOR
DH-20 & DH/1-40 KETTLES.
3.HINGED COVER MODEL #51 FOR
DH/1-40 & DH-60 KETTLES.
4.FAUCET WITH SWING SPOUT
5.DIMENSIONS IN BRACKETS [ ] ARE MM
OPTIONAL EXTRA COST FEATURES:
OPERATING GAS PRESSURE
KETTLE TILT
HANDLE
OPTIONAL
2" [51]
TANGENT
DRAWOFF
12-5/8"
[321]
6-1/8"
[156]
3-1/2"
[89]
29"
[737]
NOTES:
3.5W.C.
NATURAL
FAUCET BRACKET
FURNISHED AS
STANDARD
WALL
NATURAL
PROPANE
4.5 W.C.
11.0 W.C.
K
M
L
10.0W.C.
PROPANE
H
J
G
E
F
D
1
/
768
1295
686
TYPE OF GAS
51
/
1
30
27
4
MIN.SUPPLY
GASPRESSURE
31
60
29
1
2
/
4
787
832
457
1000
660
397
26
15
/
3
39
8
32
18
31
4
43
13
28
4
/
3
/
8
1
26
34
18
/
1
FIRING RATE (BTU/HR)
FOR BOTH NATURAL AND LP
OPTIONAL
FAUCET
GAS INLET
1/2"NPT
DH/20
DH/1-40
DH/60
100,000
150,000
72,000
A
B
20 GAL / 76 LITRES
889
505
INCHES
19
35
47
25
INCHESMM
78430
14.0 W.C.
14 W.C.
806
889
1562
MAX.SUPPLY
GASPRESSURE
61
31
35
1
/
2
3
4
/
902
1089
483
314
1175
28
12
46
711
8
/
3
/
4
1
42
19
35
762
1194
60 GAL / 228 LITRES
INCHES
47
30
MM
ADJUSTABLE FEET
OPTIONAL
#51 COVER
SHOWN
6" [152]
3
4
/
/
2
1
5
8
/
/
2
/
7
8
1
10"
[254]
MIN.REAR
CLEARANCE
9-1/2"
[241]
[165]
37
1
/
4
2
N
P
946
51
36
/
1
8
5
/
16
7
918
138
/
1
43
8
/
1
7
2
1095
191
3
/
4
2
1
/
7
/
8
7
/
8
3
/
4
5
/
8
D
E
P
N
R
C
30
30
40
50
60
FRONT VIEW RIGHT SIDE VIEW
TOP VIEW
MM
1194
749
673
879
654
40 GAL / 152 LITRES
CAPACITY (GALLONS/LITRES)
TABLE OF DIMENSIONS
463
1095
711
349
787
1537
743
INCOMING GAS PRESSURE TABLE
G
F
ELECTRICAL CONNECTION
7/8" DIA. HOLE
115/1/60, 5 AMPS
B
J
POUR PATH MAX.
6"MIN. [152]
7-1/2" MAX.
[191]
2-3/16" [56]
6"
[152]
H
KETTLE IN
FULL TILT
POSITION
POUR PATH MIN.
M
L
K
6-1/2"
WALL
6"MIN.
[152]
LEFT SIDE
CLEARANCE
1-13/16"
[46] TYP
4-5/8"
[117]
A
ID
2" [51]
2"
[51]
TYP.
65425 29
C
1. 2" TANGENT SANITARY DRAW-OFF
2.LIFTOFF COVER MODEL #31 FOR
DH-20 & DH/1-40 KETTLES.
3.HINGED COVER MODEL #51 FOR
DH/1-40 & DH-60 KETTLES.
4.FAUCET WITH SWING SPOUT
5.DIMENSIONS IN BRACKETS [ ] ARE MM
OPTIONAL EXTRA COST FEATURES:
OPERATING GAS PRESSURE
KETTLE TILT
HANDLE
OPTIONAL
2" [51]
TANGENT
DRAWOFF
12-5/8"
[321]
6-1/8"
[156]
3-1/2"
[89]
29"
[737]
NOTES:
3.5W.C.
NATURAL
FAUCET BRACKET
FURNISHED AS
STANDARD
WALL
NATURAL
PROPANE
4.5 W.C.
11.0 W.C.
K
M
L
10.0W.C.
PROPANE
H
J
G
E
F
D
1
/
768
1295
686
TYPE OF GAS
51
/
1
30
27
4
MIN.SUPPLY
GASPRESSURE
31
60
29
1
2
/
4
787
832
457
1000
660
397
26
15
/
3
39
8
32
18
31
4
43
13
28
4
/
3
/
8
1
26
34
18
/
1
FIRING RATE (BTU/HR)
FOR BOTH NATURAL AND LP
OPTIONAL
FAUCET
GAS INLET
1/2"NPT
DH/20
DH/1-40
DH/60
100,000
150,000
72,000
A
B
20 GAL / 76 LITRES
889
505
INCHES
19
35
47
25
INCHESMM
78430
14.0 W.C.
14 W.C.
806
889
1562
MAX.SUPPLY
GASPRESSURE
61
31
35
1
/
2
3
4
/
902
1089
483
314
1175
28
12
46
711
8
/
3
/
4
1
42
19
35
762
1194
60 GAL / 228 LITRES
INCHES
47
30
MM
ADJUSTABLE FEET
OPTIONAL
#51 COVER
SHOWN
6" [152]
3
4
/
/
2
1
5
8
/
/
2
/
7
8
1
10"
[254]
MIN.REAR
CLEARANCE
9-1/2"
[241]
[165]
37
1
/
4
2
N
P
946
51
36
/
1
8
5
/
16
7
918
138
/
1
43
8
/
1
7
2
1095
191
3
/
4
2
1
/
7
/
8
7
/
8
3
/
4
5
/
8
D
E
P
N
R
C
30
30
40
50
60
FRONT VIEW RIGHT SIDE VIEW
TOP VIEW
MM
1194
749
673
879
654
40 GAL / 152 LITRES
CAPACITY (GALLONS/LITRES)
TABLE OF DIMENSIONS
463
1095
711
349
787
1537
743
INCOMING GAS PRESSURE TABLE
G
F
ELECTRICAL CONNECTION
7/8" DIA. HOLE
115/1/60, 5 AMPS
B
J
POUR PATH MAX.
6"MIN. [152]
7-1/2" MAX.
[191]
2-3/16" [56]
6"
[152]
H
KETTLE IN
FULL TILT
POSITION
POUR PATH MIN.
M
L
K
6-1/2"
WALL
6"MIN.
[152]
LEFT SIDE
CLEARANCE
1-13/16"
[46] TYP
4-5/8"
[117]
A
ID
2" [51]
2"
[51]
TYP.
65425 29
C
1. 2" TANGENT SANITARY DRAW-OFF
2.LIFTOFF COVER MODEL #31 FOR
DH-20 & DH/1-40 KETTLES.
3.HINGED COVER MODEL #51 FOR
DH/1-40 & DH-60 KETTLES.
4.FAUCET WITH SWING SPOUT
5.DIMENSIONS IN BRACKETS [ ] ARE MM
OPTIONAL EXTRA COST FEATURES:
OPERATING GAS PRESSURE
KETTLE TILT
HANDLE
OPTIONAL
2" [51]
TANGENT
DRAWOFF
12-5/8"
[321]
6-1/8"
[156]
3-1/2"
[89]
29"
[737]
NOTES:
3.5W.C.
NATURAL
FAUCET BRACKET
FURNISHED AS
STANDARD
WALL
NATURAL
PROPANE
4.5 W.C.
11.0 W.C.
K
M
L
10.0W.C.
PROPANE
H
J
G
E
F
D
1
/
768
1295
686
TYPE OF GAS
51
/
1
30
27
4
MIN.SUPPLY
GASPRESSURE
31
60
29
1
2
/
4
787
832
457
1000
660
397
26
15
/
3
39
8
32
18
31
4
43
13
28
4
/
3
/
8
1
26
34
18
/
1
FIRING RATE (BTU/HR)
FOR BOTH NATURAL AND LP
OPTIONAL
FAUCET
GAS INLET
1/2"NPT
DH/20
DH/1-40
DH/60
100,000
150,000
72,000
A
B
20 GAL / 76 LITRES
889
505
INCHES
19
35
47
25
INCHESMM
78430
14.0 W.C.
14 W.C.
806
889
1562
MAX.SUPPLY
GASPRESSURE
61
31
35
1
/
2
3
4
/
902
1089
483
314
1175
28
12
46
711
8
/
3
/
4
1
42
19
35
762
1194
60 GAL / 228 LITRES
INCHES
47
30
MM
ADJUSTABLE FEET
OPTIONAL
#51 COVER
SHOWN
6" [152]
3
4
/
/
2
1
5
8
/
/
2
/
7
8
1
10"
[254]
MIN.REAR
CLEARANCE
9-1/2"
[241]
[165]
37
1
/
4
2
N
P
946
51
36
/
1
8
5
/
16
7
918
138
/
1
43
8
/
1
7
2
1095
191
3
/
4
2
1
/
7
/
8
7
/
8
3
/
4
5
/
8
D
E
P
N
R
C
30
30
40
50
60
FRONT VIEW RIGHT SIDE VIEW
TOP VIEW
MM
1194
749
673
879
654
40 GAL / 152 LITRES
CAPACITY (GALLONS/LITRES)
TABLE OF DIMENSIONS
463
1095
711
349
787
1537
743
INCOMING GAS PRESSURE TABLE
G
F
ELECTRICAL CONNECTION
7/8" DIA. HOLE
115/1/60, 5 AMPS
B
J
POUR PATH MAX.
6"MIN. [152]
7-1/2" MAX.
[191]
2-3/16" [56]
6"
[152]
H
KETTLE IN
FULL TILT
POSITION
POUR PATH MIN.
M
L
K
6-1/2"
WALL
6"MIN.
[152]
LEFT SIDE
CLEARANCE
1-13/16"
[46] TYP
4-5/8"
[117]
A
ID
2" [51]
2"
[51]
TYP.
65425 29
C
1. 2" TANGENT SANITARY DRAW-OFF
2.LIFTOFF COVER MODEL #31 FOR
DH-20 & DH/1-40 KETTLES.
3.HINGED COVER MODEL #51 FOR
DH/1-40 & DH-60 KETTLES.
4.FAUCET WITH SWING SPOUT
5.DIMENSIONS IN BRACKETS [ ] ARE MM
OPTIONAL EXTRA COST FEATURES:
OPERATING GAS PRESSURE
KETTLE TILT
HANDLE
OPTIONAL
2" [51]
TANGENT
DRAWOFF
12-5/8"
[321]
6-1/8"
[156]
3-1/2"
[89]
29"
[737]
NOTES:
3.5W.C.
NATURAL
FAUCET BRACKET
FURNISHED AS
STANDARD
WALL
NATURAL
PROPANE
4.5 W.C.
11.0 W.C.
K
M
L
10.0W.C.
PROPANE
H
J
G
E
F
D
1
/
768
1295
686
TYPE OF GAS
51
/
1
30
27
4
MIN.SUPPLY
GASPRESSURE
31
60
29
1
2
/
4
787
832
457
1000
660
397
26
15
/
3
39
8
32
18
31
4
43
13
28
4
/
3
/
8
1
26
34
18
/
1
FIRING RATE (BTU/HR)
FOR BOTH NATURAL AND LP
OPTIONAL
FAUCET
GAS INLET
1/2"NPT
DH/20
DH/1-40
DH/60
100,000
150,000
72,000
A
B
20 GAL / 76 LITRES
889
505
INCHES
19
35
47
25
INCHESMM
78430
14.0 W.C.
14 W.C.
806
889
1562
MAX.SUPPLY
GASPRESSURE
61
31
35
1
/
2
3
4
/
902
1089
483
314
1175
28
12
46
711
8
/
3
/
4
1
42
19
35
762
1194
60 GAL / 228 LITRES
INCHES
47
30
MM
ADJUSTABLE FEET
OPTIONAL
#51 COVER
SHOWN
6" [152]
3
4
/
/
2
1
5
8
/
/
2
/
7
8
1
10"
[254]
MIN.REAR
CLEARANCE
9-1/2"
[241]
[165]
37
1
/
4
2
N
P
946
51
36
/
1
8
5
/
16
7
918
138
/
1
43
8
/
1
7
2
1095
191
3
/
4
2
1
/
7
/
8
7
/
8
3
/
4
5
/
8
D
E
P
N
R
C
30
30
40
50
60
FRONT VIEW RIGHT SIDE VIEW
TOP VIEW
P/N 140906 REV A
Models DHT-40 TA/3 & DHT-60 TA/3
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
/
