Groen FT Datasheet

Groen
Brand
Groen
Model
FT
Type
Datasheet

Groen FT

The Groen FT is a 2/3 jacketed kettle with a direct steam operation. It is constructed of type 316 stainless steel and has a solid one-piece welded construction. The kettle has a heavy-duty reinforced bar rim with a continuous seal weld on the underside to ensure maximum durability and sanitation. The interior of the kettle is polished to a 180 emery grit finish, and the exterior is finished to a bright high buff finish. The kettle is ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 25 PSI. It is also NSF listed and meets all known health department and sanitation codes.

Groen FT

The Groen FT is a 2/3 jacketed kettle with a direct steam operation. It is constructed of type 316 stainless steel and has a solid one-piece welded construction. The kettle has a heavy-duty reinforced bar rim with a continuous seal weld on the underside to ensure maximum durability and sanitation. The interior of the kettle is polished to a 180 emery grit finish, and the exterior is finished to a bright high buff finish. The kettle is ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 25 PSI. It is also NSF listed and meets all known health department and sanitation codes.

Applications
Wet roasting meats
Soups
Stews
Stocks
Poultry
Sauces
Pie Fillings
Vegetables
Pasta
Rice
Gravies
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Stainless Steel
2/3 Steam Jacketed Kettle
Floor Mounted
Stationary
Direct Steam
40 to 150-Gallon
Capacities
Short Form
Groen Model FT (Specify gal-
lons) stainless steel, 2/3 jack-
eted, direct steam stationary
kettle. Solid one piece weld-
ed construction, with heavy
duty reinforced bar rim. 2”
sanitary tangent drawoff stan-
dard. Standard units fitted
with faucet bracket and one
piece dome cover with spring
assisted cover actuator. NSF
listed, ASME code constructed
for 25 PSI. Unit to be mounted
on stainless steel tubular legs,
continuously welded to kettle,
with stainless steel adjustable
floor flanges. Made in USA.
Direct Steam Kettle
model FT
Groen Direct Steam Kettle, Page 2
160169C
Revised 07/10
Description
Kettle shall be Groen Model FT (specify 40, 60, 80, 100,
125 or 150-gallon) stainless steel, 2/3 jacketed unit oper-
ating from direct steam.
Construction
Kettle shall be of type 316 stainless steel, solid one-piece
welded construction. Unit shall be provided with a heavy,
durable bar rim with a continuous seal weld on the under-
side to ensure maximum durability and sanitation. Unit
provided with faucet bracket as standard.
Finish
Interior of kettle shall be polished to a 180 emery grit fin-
ish. Exterior of kettle shall be finished to a bright high buff
finish, ensuring maximum ease in cleaning and maintain-
ing brilliant appearance.
ASME Code
Unit shall be ASME shop inspected, stamped and reg-
istered with the National Board for operation up to a
maximum working pressure of 25 PSI.
Sanitation
Unit shall be designed and constructed to meet NSF and
known health department and sanitation codes, and be
NSF listed.
Drawoff
Unit shall have a 2” sanitary tangent drawoff which is a
316 stainless steel compression disc drain valve, for easy
disassembly without tools. Larger 3” drawoffs available.
The drain outlet shall be equipped with a removable 1/4”
perforated stainless steel strainer.
Cover
Cover shall be one piece stainless steel dome shaped
cover, hinged and counterbalanced, with Model 51 spring
assisted cover actuator.
Steam Pressure
Kettle shall operate dependably at any steam pressure
between 5 and 25 PSI. Higher working pressure avail-
able.
Mounting
Unit shall be mounted on an all stainless steel, tubular
legs, continuously welded to kettle, with stainless steel
adjustable floor flanges.
Installation
Remote steam source required. Steam trap assembly is
required and not provided unless ordered as an option.
See dimension L on other side for steam inlet size and
number.
Options/Accessories
Basket inserts (TRI-BC)
Water fill faucets
Higher working pressure
3” tangent drawoff
Cold water cooling
Steam trap assemblies
Kettle brush kit
1/8” perforated disc strainer
1/4” perforated disk strainer
Solid disc strainer
Steam regulators
Contour measuring strip
Gallon etch marks
Origin of Manufacture
Kettle shall be designed and manufactured in the United
States.
Model FT shown
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.
Model FT
KETTLE I.D.
"N"-NPT
STEAM INLET
ASME APPROVED
SAFETY VALVE
J
K
A
FAUCET BRACKET
NOTE : COVER NOT SHOWN IN THIS VIEW
B
STEAM INLET
C
P
(3) 7/16 DIA.
HOLES TYP.
FRONT OF KETTLE
(REMOVABLE)
R
L
ADJUSTABLE S.S.
FLOOR FLANGES
HF
"M"-NPT
CONDENSATE
OUTLET
D
COVER OPEN
7 1/2
(191) OPEN
5 1/2
G
2" DRAWOFF
STRAINER
AND STAY
E
CONDENSATE
OUTLET
U
S
T
FAUCET
OPTIONAL
(51) VALVE
(140)
30°
90°
FLOOR DRAIN - SEE NOTE 4
NOTES:
1. KETTLE MUST BE SECURELY ANCHORED TO FLOOR.
PLAN VIEW OF LEGS
2. SANITARY (1) PIECE DOME COVER SHOWN - FURNISHED
ON 20 & 40 GALLON SIZES.
3. MODEL # 51 COUNTER BALANCED COVER FURNISHED ON
KETTLES 60 GALLONS AND OVER.
P/N 123001 REV. A
RIGHT SIDE VIEWFRONT VIEW
TOP VIEW
TANGENT DRAWOFF
OPTIONAL 3"
80
U
14 3/4
375
10 3/4
273
10 3/4
10 3/4
273
1/2
3/4
10 1/4
15 3/4
11 3/4
N
1/2
18
18 1/2
9 1/4
P
T
S
R
14 356 16
235
457
470
25
22
17
1/2
18 7/8
L
M
K
J 8 203
479
432
-
-
14
3/4
1-
13 1/2
406 17
25
-
299
635
559
14 1/4
343
17
29
-
432
635
-
1/2
13 1/2
16 1/4
11 1/2
260
400
356
-
-
3/4
14
16 1/2
-
343
413
12 1/4
292
40
14 1/2
11 3/4
59
36
12
5 1/2
15 3/4
E
F
G
H
D 1499
914
305
400
140
65
36
7
20
24
20
INCH
27 1/2
A
B
C
DIM.
MM
508
699
610
26
33
30
39
8
11 3/4
15
671651
914
368
299
178
43
8
11 3/4
15
991
203
299
381
731702
60
37
34
30660
838
762
38
36
32
940
864
762
10 3/4
273 273
1- -
15 7/8
362
17
30
-
432
734
-
403
432
762
-
3/4
14
17 1/2
-
356
419
13 1/2
311
-
356
445
343
44
8
11 3/4
15
1092
203
299
381
771854
1118
203
299
381
1956
100
40
40
36
965
914
813
1016
1016
914
TABLE OF DIMENSIONS
FLOOR FLANGES ARE THREADED AND HEIGHT ADJUSTABLE.
4. POSITION CENTER OF TANGENT DRAWOFF SPOUT 4"-5"
OVER FLOOR DRAIN FOR PROPER DRAINAGE.
CAP.
GAL.
INCH MM MMINCH INCH MM INCH MM
5. DIMENSIONS IN BRACKETS ( ) ARE MM.
P/N 123001 REV A
  • Page 1 1
  • Page 2 2

Groen FT Datasheet

Groen
Brand
Groen
Model
FT
Type
Datasheet

Groen FT

The Groen FT is a 2/3 jacketed kettle with a direct steam operation. It is constructed of type 316 stainless steel and has a solid one-piece welded construction. The kettle has a heavy-duty reinforced bar rim with a continuous seal weld on the underside to ensure maximum durability and sanitation. The interior of the kettle is polished to a 180 emery grit finish, and the exterior is finished to a bright high buff finish. The kettle is ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 25 PSI. It is also NSF listed and meets all known health department and sanitation codes.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents