Pottinger TERRASEM V 8000 D Z Operating instructions

8818.en-US.80Y.0

Original operating instructions

Mulch seed drill

TERRASEM V 8000 D Z

8818 : + . . 00001

Technical changes

Since we are constantly working on the further development of our products, there may be

deviations between the product and this publication. Therefore, no claims can be derived

from the information, figures and descriptions. For binding information on the specific charac-

teristics of your machine, please contact your service dealer.

Legal information

Please note that only the German operating instructions are the original operating instruc-

tions within the meaning of Directive 2006/42/EC. Operating instructions that are available in

languages other than German are translations of the original German operating instructions.

Please understand that changes to the scope of delivery in terms of form, equipment and

technology are possible at any time.

Reprinting, translation and reproduction in any form, including excerpts, require the written

consent of PÖTTINGER Landtechnik GmbH.

All rights under copyright law are expressly reserved by PÖTTINGER Landtechnik GmbH.

MyPÖTTINGER – Easy. Anytime. Everywhere.

• Scan the QR code from the type plate with a smartphone / tablet or enter www.mypoet-

tinger.com on the Internet.

• Spare parts lists are available exclusively via MyPÖTTINGER.

• Individual information, such as operating instructions and maintenance information for

your machines, is available on MyPÖTTINGER in “My Machines” at any time after regis-

tration.

2 | Original operating instructions TERRASEM V 8000 D Z 8818.en-US.80Y.0

Dear customer,

Quality is value that pays for itself. Therefore, we apply the highest quality standards to our

products, which are continuously monitored by our in-house quality management and by our

management. Because safety, flawless function, the highest quality and absolute reliability of

our machines in operation are our core competencies for which we stand.

These operating instructions are intended to facilitate getting to know your machine, and pro-

vide you with clear information on safe and proper handling, care and maintenance. There-

fore, please take some time to read the instructions.

These operating instructions are part of the machine. They must be kept in a suitable loca-

tion during the entire service life of the machine and must be accessible to personnel at all

times. Instructions on the basis of existing national regulations on accident prevention, traffic

regulations and environmental protection must be added.

All personnel charged with the operation, maintenance or transport of the machine must

have read and understood these instructions, in particular the safety instructions, before

starting work. Failure to follow these instructions will void the warranty.

If you have any questions regarding the contents of these operating instructions or any other

questions about this machine, please contact your PÖTTINGER service partner.

Timely and conscientious care and maintenance according the established maintenance in-

tervals will ensure operational and traffic safety as well as the reliability of your machine.

Only use original spare parts or spare parts and accessories approved by PÖTTINGER

Landtechnik GmbH. Only the original spare parts approved by us have been tested by us

and thus fulfill the suitable prerequisites for use in your machine. If unapproved parts are

used, the warranty claim will be lost. Even after the warranty period has expired, we recom-

mend using original spare parts to ensure the continuous performance of the machine.

The product liability law obligates the manufacturer as well as the dealer to hand over in-

structions when selling machines and to train the customer on the machine by referring to the

safety, operating and maintenance instructions. A confirmation in the form of a delivery dec-

laration is required to prove that the machine and the instructions have been handed over

properly. The delivery declaration is filled out electronically by the dealer.

According to product liability law, every self-employed person and farmer is an entrepreneur.

Entrepreneurial property damage is therefore excluded from liability by PÖTTINGER accord-

ing to product liability law. Property damage within the meaning of product liability law is

damage caused by a machine, but not to it.

The operating instructions are part of the machine, therefore hand them over to the new own-

er when passing on the machine. Train the new owner, and refer the owner to the aforemen-

tioned instructions.

Your PÖTTINGER service team wishes you much success.

8818.en-US.80Y.0 Original operating instructions TERRASEM V 8000 D Z | 3

Presentation conventions

This section contains explanations for a better understanding of the figures, safety instruc-

tions, warnings and textual descriptions used in these operating instructions.

Safety instructions / warnings

Safety instructions of a general nature are always at the beginning of a section. They warn of

dangers that may arise during operation of the machine or during preparations for work on

the machine. Warnings warn of dangers that may arise immediately during a procedure or

work step on the machine. Warnings are listed together with the respective procedures /

work steps in the instructional text.

Safety instructions and warnings are presented as follows:

DANGER

If the instructions in a text section marked in this way are not followed, there is a risk

of fatal or life-threatening injury.

► Make sure to follow all instructions in such text sections!

WARNING

If the instructions in a text section marked in this way are not followed, there is a risk

of serious injury.

► Make sure to follow all instructions in such text sections!

CAUTION

If the instructions in a text section marked in this way are not followed, there is a risk

of injury.

► Make sure to follow all instructions in such text sections!

NOTICE

If the instructions in a text section marked in this way are not followed, there is a risk

of property damage.

► Make sure to follow all instructions in such text sections!

TIP

Text sections marked in this way contain recommendations and tips for handling the ma-

chine.

ENVIRONMENT

Text sections marked in this way contain information on the topic of environmental protec-

tion.

Directional information

Directional information (such as left, right, front, rear) is given based on the normal “working

direction of travel” of the machine.

4 | Original operating instructions TERRASEM V 8000 D Z 8818.en-US.80Y.0

Orientation information for a figure of a machine detail, refers to this figure itself and is only

understood as relative to the direction of travel occasionally. The meaning of the orientation

information (if required), is clear from the accompanying text itself.

Designations

In these operating instructions, the existing interchangeable equipment for agricultural vehi-

cles (according to European Directive 2006/42/EC) is referred to as the machine.

Vehicles intended for driving the existing machine are referred to as tractors.

Equipment designated as optional is only offered on certain machine versions or only in cer-

tain countries.

Personal protective equipment includes safety goggles, work gloves, safety shoes, close-

fitting long work clothes, hairnet for long hair, hearing protection, and suitable equipment to

protect against seed treatment dusts (such as dust masks, etc.). The complete selection of

suitable personal protective equipment for the respective purpose remains the responsibility

of the machine operator.

Cross-references

Cross-references to another place in the operating instructions or another document are in

the text, with specification of the chapter and subchapter or section. The name of the sub-

chapter or section is in quotation marks. (Example: Check all screws on the machine for

tightness. See “Tightening torques” on page xxx.) The subchapter or section can also be

found in the document via an entry in the table of contents.

Action steps

An arrow or sequential numbering indicates action steps that should be performed.

A black-bordered indented arrow or sequential indented numbering indicates intermedi-

ate results or intermediate steps that should be performed.

Figures

Figures may differ in detail from your machine and are to be understood as a schematic dia-

gram/symbolic illustration.

Use of colors

Figures in this printed document supplied by PÖTTINGER Landtechnik GmbH are shown ex-

clusively in grayscale or black and white.

Figures in electronically distributable documents (PDF) are also displayed in color and can

be printed in color if required.

Use of symbols

Figures may contain additional inserted symbols, arrows and other lines that are used to im-

prove the comprehensibility of the image content, or are intended to draw attention to a spe-

cific area of the image.

8818.en-US.80Y.0 Original operating instructions TERRASEM V 8000 D Z | 5

Product delivery instructions

Please check the points listed according to the product liability obligation.

Please mark with a cross where applicable.

Machine checked according to delivery note. All enclosed parts removed; all safety

equipment, cardan shaft and operating equipment present.

Operation, commissioning and maintenance of the machine or device discussed

and clarified with the customer based on the operating instructions.

Tires checked for correct air pressure.

Wheel nuts checked for tight fit.

Correct PTO shaft speed and direction of rotation pointed out.

Adjustment to the tractor performed; three-point adjustment, drawbar height, hand-

brake lever attachment in the tractor cab, forced steering linkage adjusted, compati-

bility of all required electrical, hydraulic and pneumatic plug connections to the trac-

tor checked and established.

Cardan shaft correctly cut to length.

Test run of all machine functions as well as parking brake and service brake per-

formed and no defects found.

Function explanation during test run.

Swinging into transport and working position explained.

Information about desired or additional equipment given.

Information on required reading of the operating instructions given.

A confirmation is required to prove that the machine and the operating instructions have

been handed over properly. For this purpose, you have received a confirmation email from

PÖTTINGER. If you have not received this email, please contact your local dealer. Your

dealer can fill out the delivery declaration online.

Austria

PÖTTINGER Landtechnik GmbH

Industriegelände 1

4710 Grieskirchen

Phone+43 7248 600-0

Fax+43 7248 600-2513

[email protected]

6 | Original operating instructions TERRASEM V 8000 D Z 8818.en-US.80Y.0

Change index

Date Index Reason for change Changed chapter

7.12.2021 V.0 Facelift

8818.en-US.80Y.0 Original operating instructions TERRASEM V 8000 D Z | 7

Screw tightening torques factory standard

Screw tightening torques................................................................................................... 17

Design and function

Functional elements.......................................................................................................... 18

Tegosem functional elements........................................................................................... 20

Electrical control elements................................................................................................ 21

Hydraulic control elements................................................................................................ 22

Sensors and installation position....................................................................................... 22

Included accessories......................................................................................................... 22

Retrofit program................................................................................................................ 22

At a glance

Labeling............................................................................................................................. 23

Type plate.................................................................................................................... 23

Description

Declaration of conformity.................................................................................................. 25

Intended use..................................................................................................................... 27

Improper use..................................................................................................................... 27

Technical data

Dimensions....................................................................................................................... 28

Attachment / lower linkage................................................................................................ 28

Tires.................................................................................................................................. 28

Weights............................................................................................................................. 28

Power requirement............................................................................................................ 29

Application limits of the machine....................................................................................... 29

Load limits......................................................................................................................... 29

Seed placement................................................................................................................ 29

Hydraulic system............................................................................................................... 30

Brake system.................................................................................................................... 30

Brake setting................................................................................................................ 31

Electrical system............................................................................................................... 31

Fuse protection of the electrical system............................................................................ 32

Fuse protection of the electrical system for the operating function............................. 32

Content

8 | Original operating instructions TERRASEM V 8000 D Z 8818.en-US.80Y.0

Fuse protection in the fuse box................................................................................... 32

POWER CONTROL terminal............................................................................................ 33

EXPERT 75 terminal......................................................................................................... 34

Terminal CCI 1200............................................................................................................ 34

Noise emission.................................................................................................................. 35

Safety and environment

Safety instructions............................................................................................................. 36

Qualification of the personnel............................................................................................ 36

Performing maintenance work.......................................................................................... 36

Organizational measures.................................................................................................. 36

Ensuring operational safety............................................................................................... 37

Special dangers................................................................................................................ 38

Protective devices............................................................................................................. 39

Warning signs................................................................................................................... 40

Traffic safety equipment.................................................................................................... 45

Operational danger zone................................................................................................... 48

Handling hazardous substances....................................................................................... 50

Fuel efficiency and soil protection..................................................................................... 50

Disposal of the machine.................................................................................................... 51

POWER CONTROL terminal operation

POWER CONTROL terminal overview............................................................................. 52

Input keypad................................................................................................................ 52

EXPERT 75 ISOBUS terminal

EXPERT 75 terminal overview.......................................................................................... 54

Input keypad................................................................................................................ 54

CCI ISOBUS terminal

CCI 1200 terminal overview.............................................................................................. 56

ISOBUS operation

ISOBUS operation............................................................................................................. 57

Input masks................................................................................................................. 57

Structure of the control system......................................................................................... 57

Content

8818.en-US.80Y.0 Original operating instructions TERRASEM V 8000 D Z | 9

Start screen....................................................................................................................... 60

1 WORK menu.................................................................................................................. 62

Status bar.................................................................................................................... 69

SET menu......................................................................................................................... 72

2.1.1 Seed library - overview....................................................................................... 72

2.1.1.1 Seed library - data sheet....................................................................................... 74

2.1.1.2 Seed library - dosing wheel suggestion................................................................ 77

Turning menu.............................................................................................................. 79

Turning – step 1: Set dosing............................................................................................. 79

Turning – step 2: Check and predosing............................................................................ 81

Turning - step 3: Turning................................................................................................... 83

Turning - step 4: Weight entry........................................................................................... 84

Turning – step 5: Completion............................................................................................ 85

Turning - dosing wheel calibration.................................................................................... 86

Tramline layout............................................................................................................ 90

Manual speed specification and seed rate adjustment................................................ 92

Area sample................................................................................................................ 94

Area sample - step 1: Set dosing...................................................................................... 94

Area sample - step 2: Weight entry................................................................................... 96

Turning - step 3: Completion............................................................................................. 97

Sensors....................................................................................................................... 98

Radar sensor..................................................................................................................... 99

2.2.2 Calibration of the depth displays.............................................................................. 101

Calibration of the depth displays....................................................................................... 101

Softkey assignment..................................................................................................... 103

Task control................................................................................................................. 105

2.4.1 Section control......................................................................................................... 106

Rate control....................................................................................................................... 109

2.4.3 Machine geometry.................................................................................................... 110

Test menu......................................................................................................................... 112

3.1 Test menu - sensors.............................................................................................. 113

3.1.1 Test menu - sensors................................................................................................ 113

Test menu - signal source speed / emergency operation................................................. 115

3.2 Test menu - dosing/tank........................................................................................ 117

3.2.1 Test menu - dosing 1 tab......................................................................................... 119

3.2.2 Test menu - dosing 2 tab......................................................................................... 121

3.3 Test menu - hydraulic system................................................................................ 121

Test menu - power supply........................................................................................... 124

Content

10 | Original operating instructions TERRASEM V 8000 D Z 8818.en-US.80Y.0

3.5 Test menu - seed flow monitoring......................................................................... 125

Comfort switch-off............................................................................................................. 126

Sensitivity of the seed flow monitoring.............................................................................. 127

Status of the seed flow sensors - LED.............................................................................. 127

Test menu - Intelligent Distribution System (=IDS)...................................................... 128

DATA menu....................................................................................................................... 131

Configuration menu........................................................................................................... 132

Configuration menu - machine type............................................................................. 132

Configuration menu - hydraulic options....................................................................... 134

Configuration menu - serial number............................................................................ 136

Configuration menu - developer mode........................................................................ 136

Configuration menu - Intelligent Distribution System (=IDS)....................................... 137

5 Error list.......................................................................................................................... 139

Task controller (option)

ISOBUS task controller..................................................................................................... 150

Settings for ISOBUS task controller in the machine control system............................ 151

Settings for ISOBUS task controller in the terminal control system............................. 151

Attachment to the tractor................................................................................................... 152

ISOBUS task controller connection diagram..................................................................... 153

Operation of machine functional elements

Machine functions............................................................................................................. 155

Switching the blower on and off................................................................................... 155

Flaps / cover / auxiliary equipment

Opening / closing the cover and flaps............................................................................... 157

Seed hopper pressure tank cover............................................................................... 157

Seed hopper seed drain.............................................................................................. 158

Blower air distributor (only fertilizer):........................................................................... 158

Dosing wheel housing................................................................................................. 160

Removing / installing the dosing wheel....................................................................... 162

Dosing......................................................................................................................... 163

Distributor head without half-width shutoff................................................................... 163

Manually switching off the distributor head outlets...................................................... 164

Auxiliary equipment........................................................................................................... 164

Collection bag.............................................................................................................. 164

Content

8818.en-US.80Y.0 Original operating instructions TERRASEM V 8000 D Z | 11

Telescopic drawbar..................................................................................................... 165

Extending the telescopic drawbar..................................................................................... 166

Retracting the telescopic drawbar..................................................................................... 166

Climbing aids for operating or loading platforms......................................................... 167

Stairway for the side operating platform............................................................................ 167

Transport locks

Transport locks.................................................................................................................. 170

Locking hooks and safety bolts................................................................................... 170

Shut-off valves for hydraulic functions......................................................................... 172

Operation

Commissioning.................................................................................................................. 174

Quick reference guide................................................................................................. 174

Adjusting the tractor hydraulic system......................................................................... 175

Emergency brake valve adjusting bolt position (hydr. single line brake H1L)............. 175

Breakaway rope attachment (hydr. single line brake H1L emergency brake valve).... 176

Attaching the machine................................................................................................. 177

Tractor ballasting......................................................................................................... 179

Determining the tractor ballasting through the weighing method...................................... 180

Determining the tractor ballasting through calculation...................................................... 182

Setting and conversion...................................................................................................... 183

Track loosener (option)................................................................................................ 183

Track marker (option).................................................................................................. 184

Track marker setting......................................................................................................... 184

Track marker marking disc................................................................................................ 189

Distributor head insert settings.................................................................................... 191

Distributor head insert for 75 row spacing......................................................................... 192

Distributor head insert for 50 row spacing......................................................................... 194

Distributor head insert for 37.5 row spacing...................................................................... 195

Distributor head insert for 25 row spacing......................................................................... 197

Distributor head insert removal......................................................................................... 199

Hydraulic blower drive................................................................................................. 200

Basic setting...................................................................................................................... 200

Blower basic setting (without load sensing control system).............................................. 201

Blower basic setting (with load sensing control system)................................................... 202

Adjusting the seed dosing (fertilizer)........................................................................... 204

Content

12 | Original operating instructions TERRASEM V 8000 D Z 8818.en-US.80Y.0

Setting the injector lever (only fertilizer)............................................................................ 206

Distributor unit and tramlines (machines without electric control flaps)............................ 207

Distributor unit and tramlines (machines with electric control flaps)................................. 208

Seed tables for electric dosing.......................................................................................... 210

Dosing wheel overview..................................................................................................... 213

Maximum application rate for TEGOSEM................................................................... 214

Adjusting the coulter system........................................................................................ 215

Seed placement depth...................................................................................................... 216

Setting the coulter pressure rollers................................................................................... 217

Coulter pressure hydraulic system.................................................................................... 219

Contact pressure (ground adaptation) of the folding rails............................................ 221

Front board (option)..................................................................................................... 224

DISC system................................................................................................................ 224

Leveling board............................................................................................................. 228

Edge sheet settings..................................................................................................... 230

Harrow (option) setting................................................................................................ 233

Leveling harrow setting................................................................................................ 235

Leveling harrow supplement............................................................................................. 238

Setting the tramline marker (option)............................................................................ 240

Jockey wheel (option).................................................................................................. 242

Fertilizer coulter (option).............................................................................................. 243

Tegosem additional tank (option)................................................................................ 244

Tramlines: Examples for creation...................................................................................... 246

Coupling............................................................................................................................ 248

Air brake system (option)............................................................................................. 249

Disconnecting the air brake system connecting lines....................................................... 251

Connecting the hydraulic hoses.................................................................................. 251

Connecting the cables................................................................................................. 253

Assembling the operator terminal................................................................................ 253

Connecting the tractor terminal................................................................................... 254

Starting work..................................................................................................................... 254

Function of the hydraulic connections......................................................................... 255

Transport journey........................................................................................................ 255

Transport on loading platforms.................................................................................... 256

Turning maneuvers on a slope.................................................................................... 257

Filling the seed hopper................................................................................................ 257

Filling auger (option).................................................................................................... 258

Content

8818.en-US.80Y.0 Original operating instructions TERRASEM V 8000 D Z | 13

Bringing the machine from the road transport position into the working position

(standard).................................................................................................................... 260

Seeding work with POWER CONTROL terminal / ISOBUS terminal.......................... 262

Bringing the machine from the working position into the road transport position

(standard).................................................................................................................... 263

Emptying the seed hopper........................................................................................... 265

Decommissioning the machine at the end of the season.................................................. 266

Emptying the dosing wheel/dosing wheel housing...................................................... 266

Releasing the pressure tank cover.............................................................................. 268

Uncoupling the machine from the tractor..................................................................... 268

Disconnection.................................................................................................................... 269

Disassembling the operator terminal........................................................................... 270

Disconnecting the tractor terminal............................................................................... 270

Disconnecting the cables............................................................................................. 271

Disconnecting the hydraulic hoses.............................................................................. 271

Attaching the anti-theft device..................................................................................... 272

Maintenance

Maintaining operational readiness.................................................................................... 273

General notes.................................................................................................................... 274

Condition-based maintenance

Cleaning the terminal........................................................................................................ 276

Clean the dosing wheel housing and dosing wheel.......................................................... 276

Cleaning the inside of the seed hopper............................................................................. 279

Cleaning / preserving the machine.................................................................................... 280

Front board wear part........................................................................................................ 280

Harrow tines wear limit...................................................................................................... 282

Replacing the track loosener chisel coulter....................................................................... 283

Pressure roller replacement.............................................................................................. 284

Oil cooler (optional)........................................................................................................... 286

Predetermined maintenance

Daily maintenance............................................................................................................. 287

Brake fluid fill level....................................................................................................... 287

Checking brake hoses and hose couplings................................................................. 288

Air tank........................................................................................................................ 289

Checking the hydraulic system.................................................................................... 290

Content

14 | Original operating instructions TERRASEM V 8000 D Z 8818.en-US.80Y.0

Checking / replacing lighting bulbs.............................................................................. 291

Checking / replacing warning signs, warning triangles, warning foils.......................... 291

Once after 10 hours.......................................................................................................... 293

Retightening the axle bolts and wheel nuts................................................................. 293

Every 20 hours.................................................................................................................. 293

Lubricating the filling auger swivel mechanism........................................................... 293

Lubricating the jockey wheel pivot bearing.................................................................. 294

Every 200 hours................................................................................................................ 295

Check of brake pads.................................................................................................... 295

Every 6000 hectares......................................................................................................... 296

Checking / replacing the tire packer wheel bearing..................................................... 296

After each season (winter storage)................................................................................... 297

Clean the dosing wheel housing and dosing wheel..................................................... 297

Cleaning the detachable dosing wheels...................................................................... 300

Cleaning the inside of the seed hopper....................................................................... 305

Cleaning / preserving the machine.............................................................................. 306

Seed coulter scraper................................................................................................... 307

Suction basket............................................................................................................. 309

Every 2 years.................................................................................................................... 310

Replacing the brake fluid............................................................................................. 310

Oil and oil filter change................................................................................................ 310

Every 4 years.................................................................................................................... 311

Checking / refilling the hydraulic pressure accumulator.............................................. 311

Every 6 years.................................................................................................................... 312

Replacing the hydraulic hoses..................................................................................... 312

Lubrication schedule......................................................................................................... 313

Operating fluids

Operating fluid specification.............................................................................................. 314

Operating fluids and fill quantities..................................................................................... 314

Advice and support

What to do if ..................................................................................................................... 315

Display values / display symbols not correct............................................................... 315

Seed application faulty................................................................................................ 316

Terminal inactive......................................................................................................... 317

Lighting........................................................................................................................ 317

Content

8818.en-US.80Y.0 Original operating instructions TERRASEM V 8000 D Z | 15

Sensors

Sensor troubleshooting..................................................................................................... 319

Status of the IDS motor sensors....................................................................................... 319

Status of the seed flow sensors........................................................................................ 319

Schedules

Circuit diagrams................................................................................................................ 321

Equipment table........................................................................................................... 321

Hydraulics.................................................................................................................... 324

Terrasem hydraulic plan.................................................................................................... 324

Supplement to the USA / CANADA operating instructions

USA / CANADA English warning signs............................................................................. 326

Safely towing loads........................................................................................................... 333

Index 334

Content

16 | Original operating instructions TERRASEM V 8000 D Z 8818.en-US.80Y.0

Screw tightening torques

This factory standard applies to all metric screws for which no special tightening torque is

specified in the drawing/instructions. The respective strength class can be seen on the screw

head.

• The values specified are nominal values and apply to a head friction coefficient of

IJ=0.14 and a thread friction of IJ=0.125. Slight deviations of the clamping force due to

different friction coefficients may occur. The values listed must be observed with a toler-

ance of ± 10%.

• If the specified tightening torques are used and the friction coefficients used are present,

the screw material is stressed to 90% of the minimum yield strength according to DIN

ISO 898.

• If a special tightening torque is specified for a screw connection, all of these screw con-

nections must be tightened with a torque wrench and the specified tightening torque.

Metric thread Strength class 8.8 Strength class 10.9

Tightening torque Clamping force Tightening torque Clamping force

M 4 3,1 Nm 4000 N 4,4 Nm 5700 N

M 5 6,2 Nm 6600 N 8,7 Nm 9300 N

M 6 10,5 Nm 9300 N 15 Nm 13000 N

M 8 25 Nm 17000 N 36 Nm 24000 N

M 10 50 Nm 27000 N 70 Nm 38000 N

M 12 86 Nm 39500 N 121 Nm 56000 N

M 14 135 Nm 54000 N 195 Nm 76000 N

M 16 215 Nm 75000 N 300 Nm 105000 N

M 20 410 Nm 117000 N 580 Nm 164000 N

M 24 710 Nm 168000 N 1000 Nm 237000 N

M 30 1400 Nm 270000 N 2000 Nm 380000 N

M 8 x 1 27 Nm 18700 N 38 Nm 26500 N

M 10 x 1.25 53 Nm 29000 N 74 Nm 41000 N

M 12 x 1.25 95 Nm 44500 N 130 Nm 63000 N

M 14 x 1.5 150 Nm 60000 N 210 Nm 85000 N

M 16 x 1.5 230 Nm 81000 N 320 Nm 115000 N

M 20 x 1.5 460 Nm 134000 N 650 Nm 189000 N

M 24 x 2 780 Nm 188000 N 1090 Nm 265000 N

Screw tightening torques factory standard

8818.en-US.80Y.0 Original operating instructions TERRASEM V 8000 D Z | 17

Functional elements

Name and function

Pos. Element Function

1 Drawbar / tele-

scopic drawbar

with rocker hitch

Enables tight curve radii at the headland. During transport; tele-

scopic (option).

Drawbar with drawbar eye; telescopic (option)

2Support leg Ensures stability when parking the machine.

3 Toolbox For storing tools

4 Disc system (disc

harrow)

The maintenance-free, rubber-mounted discs loosen the soil

over the entire surface.

5 Lateral service

catwalk

Service catwalk with stairs, for care and maintenance work on

the left folding rail.

The lateral service catwalk can only be used when the machine

is in the working position.

6Fertilizer coulter Ensures the correct placement of the fertilizer or seed from dos-

ing 2

7 Tire packer The tire packer ensures targeted and uniform reconsolidation in

front of the seed coulters and serves as a chassis during road

transport.

8 DUAL DISC dou-

ble disc coulter

The coulter system deposits the seed in the seeding soil.

9 Coulter pressure

rollers

Coulter pressure rollers ensure secure ground contact with re-

consolidation of the seeding soil.

10 Standard tramline

marker (option)

Tramline markers mark the tramlines kept free of seed for sub-

sequently used machines. Hydraulic drive, automatic or semi-

automatic control system.

10 Harrow Harrows stripe the seeding lines and cover the seed evenly with

soil.

11 Track marker (op-

tion)

The track markers mark the track to be driven. Hydraulic drive,

automatic control system.

12 Loading platform Loading platform with ladder and stairs, for care and mainte-

nance work and filling the pressure tank.

The loading platform can only be used when the machine is in

the working position.

13 Distributor head For uniform distribution of the seed to the seed hoses that lead

to the coulter system. Mechanically or electrically controlled

flaps on the outlets enable the seed hoses to be shut off as

needed.

14 Pressure tank for

dosing 2

The rear tank is designated tank 2.

15 Pressure tank for

dosing 1

The front tank is designated tank 1.

Design and function

18 | Original operating instructions TERRASEM V 8000 D Z 8818.en-US.80Y.0

Pos. Element Function

16 Blower The hydraulically driven blower provides the required air flow for

the pneumatic transport of the seed.

17 Hose holder Hydraulic hoses and cables are stored in the hose holder when

parking the machine.

Name and function

Pos. Element

27 Disc harrow field / lifting leveling board

28 Blower

29 Front board (option)

30 Seed hopper filling auger (option)

31 Seed rail lifting and coulter pressure setting

32 Special tramline marker (option)

33 Track loosener for single and dual wheels (option)

Design and function

8818.en-US.80Y.0 Original operating instructions TERRASEM V 8000 D Z | 19

Tegosem functional elements

(equipment options)

Name and function

Pos. Element

34 Additional tank

35 Seed line

36 Feeder unit: for redirecting the seed from the additional tank into the seed flow of the

seed drill (on both sides)

37 Spreading rail: for spreading the seed via the seed flow of the additional tank

Design and function

20 | Original operating instructions TERRASEM V 8000 D Z 8818.en-US.80Y.0

Page is loading ...

Pottinger TERRASEM V 8000 D Z Operating instructions

Pottinger TERRASEM V 8000 D Z Operating instructions

Related papers

Other documents