Rowlinson Garden Creations Corner Set Assembly Instructions

  • Hello, I'm your chat assistant, and I've reviewed the assembly instructions for the Rowlinson Garden Creations Corner Set SS408. This document details the components included, such as vertical and horizontal slat panels, posts, and planters, along with the necessary biocidal treatment for wood protection. I am here to assist you with any questions about assembling the garden corner set.
  • What are the components made of?
    What do the biocidal products protect against?
    How many people should assemble this product?
Assembly Instructions
Garden Creations Corner Set English SS408
ROWLINSON GARDEN PRODUCTS LIMITED
Green Lane
Wardle, Nr. Nantwich
Cheshire, CW5 6BN
email: support@rowgar.co.uk
Help Line (Normal Office Hours) 01829 261 121
Before assembly
• We recommend that time is taken to read the instructions before starting
assembly, then follow the easy step by step guide. The instruction sheet is
only a guide to the assembly. Certain items may not be shown to scale.
• Check all components prior to assembly
• This product should be assembled by no less than two people
• Drill pilot hole for each screw if necessary
x 2 Drill
Recommended tools for assembly
• Power drill/screwdriver
• 3mm drill bit
• Crosshead screwdriver bit
No. Components Qty.
1 Vertical slat panel 1
2 Horizontal slat panel 1
3 Posts 3
4 Tall square planter 1
5Small rectangular planter 2
No. Fixing Kit Qty.
6 70mm screws 12
We constantly improve the quality of our products, occasionally the components
may differ from the components shown and are only correct at time of printing. We
reserve the right to change the specification of our products without prior notice.
2017 © Rowlinson Garden Products Ltd
70mm
70mm
70mm
1
5
23
4
1. Screens & posts 2. Planters
70mm
Biocidal Products
Regulation EU 528/2012
Korasit® KS treated wood
is a treated article that
incorporated biocidal products:
copper hydroxide carbonate,
N,N-didecyl-N-methypoly
ammoniumpropionate. They
protect wood against fungal
decay, rot and insect attack.
Keep away from food, drink
and animal feeding stuffs. Avoid
breathing dust when cutting
treated wood.
/