2. C&T International
  3. Providence Hutch

C&T International Providence Hutch, Sorelle FURNITURE Providence Hutch Operating instructions

  • Hello, I've reviewed the Providence Hutch assembly instructions. This document includes a parts list, diagrams, and step-by-step guidance for assembling your new hutch. Feel free to ask me any questions you have about it.
  • What should I do before assembly?
    Where is the product made?
    Do I need any tools to assemble the hutch?
Providence Hutch
Website: www.sorellefurniture.com
Important Information:
Before assembly, read these instructions. Make sure
Made in Vietnam
all preassembled parts are tight. Store this instruction
manual for future reference.
Adjustable Shelf (1 pc)
(G) Upper Back Panel (1 pc)
(H) Down Back Panel (1 pc)
Fixed Shelf (1 pc)
A
B
C
E
D
Top panel ( 1 pc)
Left Side panel (1 pcs)
Assembly Hardware
Right Side panel (1 pcs)
Back- Bottom Rail (1pc)
Providence Hutch Assembly Parts
Page 2
Flat Washer (8 pcs)
Shelf Support (4 pcs)
Cam Bolt (4 pcs)
Cam Lock (4 pcs)
M6*25MM Allen Bolt (8 pcs)
Spring
( f )
( g )
( b )
( a )
( c )
( d )
( e )
( h ) Washer ( 8 pcs)
Ø3.5 X 15mm Phillips Screw (4 pcs)
Ø3.5 X 15mm Phillips Screw (46 pcs)
(i)
Providence Hutch Assembly
Insert Four (4) Cam Bolt(d) to Side
panel(B&C). See Figure 1.
Attach the Top panel(A)& the Back
Bottom Rail(D) to Side panel(B&C)
See Figure 2.
Attach the Fixed Shelf (E) to Side panel(B&C)
See Figure 3.
e (4x)
d (4x)
fhg
(4x)
f h
g
(4x)
i
(1x)
i
(1x)
12
3
Figure 1.
Page 3
Figure 3.
Figure 2.
Providence Hutch Assembly
4
Tool required
Tool required
Back Panel Assembly
See Figure 4.
5Adjustable Shelf (F) Assembly
F
F
See Figure 5.
c (46x)
b (4x)
a (4x)
Figure 4.
Figure 5.
Page 4
6Hutch with Combo
See Figure 6.
Figure 6.
2x
/