2. Computers & electronics
  3. Computer cables
  4. Signal cables
  5. Qazqa
  6. Lauf

Qazqa Lauf User manual

  • Hello! I've reviewed the user manual for the Lauf WL 76 Copper wall lamp. This document outlines the installation process, including connecting wires and mounting, and highlights features like the E27 lamp base and compatibility with wall switch dimmers. I'm ready to answer your questions about the lamp and the information provided in the manual.
  • What is the maximum wattage of the bulb that can be used with the luminaire?
    What type of lamp should be used with the luminaire?
    What do the symbols N, and L mean when connecting wires?
    Can the luminaire be dimmed?
Lauf WL 76 Copper
106561
OFF
STEP 1
STEP 4
76 CM
E27 Max.25W
20
14 CM
12.50 cm
3X
20
I
8mm
Strip the wire to the indicated length (mm) ;different items require different length
When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
Take note of the symbols when connecting wires:
=Neutral =Live =Earth
11.
12. Meaning of symbols:
Connect using the spaciļ€ed cable; different items require different cable
The luminaire can be dimmed by wall switch
Only the self-shielded halogen lamp should be used with the luminaire
3x
min.0.75mm2
NL
/