Qazqa Maro, Broom User manual

  • Hello! I have reviewed the user manual for the Broom TL 1 Gold floor lamp. This document provides instructions on the assembly and safe usage of the lamp, including how to connect wires and replace the halogen bulb. I am ready to answer your questions about the device.
  • What is the maximum wattage of the lamp?
    What type of lamp should be used?
    Can the lamp be dimmed?
Broom TL 1 Gold
103089
OFF
STEP 1
E27 Max.40W
20
STEP 4
3X
20
I
8mm
Strip the wire to the indicated length (mm) ;different items require different length
When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
Take note of the symbols when connecting wires:
=Neutral =Live =Earth
11.
12. Meaning of symbols:
Connect using the spaciļ€ed cable; different items require different cable
The luminaire can be dimmed by wall switch
Only the self-shielded halogen lamp should be used with the luminaire
3x
min.0.75mm2
NL
/