28mm Medieval Ruin #1
B28-RU-101
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and
remember to cut away from yourself at all times.
During the construction of this model, you may find it convenient to use pegs / elastic bands to hold pieces in
place while you allow glue to dry.
You may find it more convenient to paint parts of this kit prior to assembly – see “Painting” below for details.
Take the base and the two inner walls.
Glue them together as shown above.
Take the two outer frames…
..and glue them into position, ensuring the exposed
beams line up with those on the inner walls.
The insert pieces for one wall.
The insert pieces for the other wall.
Glue them into position within the frame.
Repeat for the other wall.
The compleed ruin.
Painting Instructions
Prior to construction, the flag stone floor piece was removed
from the sprue and sprayed with a black primer (car undercoat).
The rest of the kit was left on the sprue and sprayed with a white
primer (car undercoat)
Once the spray was dry, the flag stone floor was then dry
brushed with two different shades of grey emulsion paint
(household DIY paint).
The inner walls had their woodwork painted using a light brown
(model paint).
After construction, the tops of the walls were touched up with white
(model) paint, being careful not to get any on the exposed wooden
beams.
Once that had dried a black ink (Games Workshop’s “Nuln oil” ink
wash) was applied in downwards strokes using a medium brush to
give the weathered effect.
Finally a small amount of flock was applied into cracks and other
appropriate locations on the model to make it a slightly overgrown .
-
1
-
2
BLOTZ B28-RU-101 Assembly Instructions
- Type
- Assembly Instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
BLOTZ BH0-ME-108 Assembly Instructions
-
BLOTZ B28-BS-001 Assembly Instructions
-
BLOTZ B15-SF-506 Assembly Instructions
-
BLOTZ B15-CS-251 Operating instructions
-
BLOTZ B15-CS-252 Assembly Instructions
-
BLOTZ B28-SF-506 Assembly Instructions
-
BLOTZ B28-WF-118 Assembly Instructions
-
BLOTZ B28-SF-235 Assembly Instructions
-
BLOTZ B28-SF-240 Assembly Instructions
-
BLOTZ B15-MD-002 Assembly Instructions
