Modular Bay Collection
Assembly & Care Instructions
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
ITM. HUC25250AM-1, HUC22069AM-1, HUC25253AM-1,
HUC22071AM-1, HUC25251AM-1, HUC37135-1, HUC23800-1
Model: FRN-801640
ATLeisure, LLC
US Toll Free: 1-855-880-7205 (English)
8am - 5pm, Monday through Friday, Eastern Time
Email: customerser[email protected]
or visit our website at www.atleisure.com
Please Contact ATLeisure Customer Service
Prior to Returning to Store
For assistance with use, parts,
or customer service please contact:
For outdoor residential household use only.
Not for commercial use.
Designed in USA
Made in Vietnam
C105972
Woodfromwell-
managedforests
100%
Contents
Double Right Arm Assembly HUC25250AM-1
Part Description Quantity Re-Order Number
1 Bolt M6 x 95 mm & Nuts 6
2 Screw M6 x 35 mm 8
3 Allen Key 4 2
KIT Hardware Kit (Re-order only) 1 FRN-801640-
HUC25250AM-KIT
Contents
Double Right Arm Assembly
Hardware Contents
Package Contents
Assembly
Double Left Arm Assembly
Hardware Contents
Package Contents
Assembly
Corner Assembly
Hardware Contents
Package Contents
Assembly
Chair Assembly
Hardware Contents
Package Contents
Assembly
Armless Chair Assembly
Hardware Contents
Package Contents
Assembly
Mid Table Assembly
Hardware Contents
Package Contents
Assembly
Bench Assembly
Hardware Contents
Package Contents
Assembly
Wood Maintenance
Furniture Care and Maintenance
Warnings and Cautions
Warranty
2
2-4
2
3
3-4
5-7
5
5
6-7
8-10
8
8
9-10
11-12
11
11
12
13-14
13
13
14
15-16
15
15
16
17-18
17
17
18
19
19
20
21
CAUTION: Do not use sharp tools to remove the protective material, as it may damage
the product. Please lay out all package contents to make sure all pieces are present.
2
Hardware Contents:
1NUTS
N/A
N/A
N/A
HUC25250AM-1
Part Description Quantity Re-Order Number
[1] Top Back Slat 1 FRN-801640-HUC25250AM-1
[2] Right Arm 1 FRN-801640-HUC25250AM-2
[3] Left Arm 1 FRN-801640-HUC25250AM-3
[4] Seat Support Bar 2 FRN-801640-HUC25250AM-4
[5] Seat Bottom 2 FRN-801640-HUC25250AM-5
[6] Back Slats 2 FRN-801640-HUC25250AM-6
BCUSH Back Cushion 2 FRN-801640-HUC25250AM-
BCUSH
SCUSH Seat Cushion 1 FRN-801640-HUC25250AM-
SCUSH
Double Right Arm Assembly
3
Step 1:
[1]
Package Contents:
[2] [3] [4]
[5] [6] BCUSH SCUSH
Place all parts on level, clean, soft surface.
1[1]
[4]
[4]
10mm
5mm
UP
DOWN
Double Right Arm Assembly
4
Step 3:
Step 4:
2
HUC25250AM-1
1
1
1
[6]
Step 2:
Double Left Arm Assembly
5
Part Description Quantity Re-Order Number
[1] Top Back Slat 1 FRN-801640-HUC22069AM-1
[2] Right Arm 1 FRN-801640-HUC22069AM-2
[3] Left Arm 1 FRN-801640-HUC22069AM-3
[4] Seat Support Bar 2 FRN-801640-HUC22069AM-4
[5] Seat Bottom 2 FRN-801640-HUC22069AM-5
[6] Back Slats 2 FRN-801640-HUC22069AM-6
BCUSH Back Cushion 2 FRN-801640-HUC22069AM-
BCUSH
SCUSH Seat Cushion 1 FRN-801640-HUC22069AM-
SCUSH
Part Description Quantity Re-Order Number
1 Bolt M6 x 95 mm & Nuts 6
2 Screw M6 x 35 mm 8
3 Allen Key 4 2
KIT Hardware Kit (Re-order only) 1 FRN-801640-
HUC22069AM-KIT
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product. Please lay out all package contents to make sure all pieces are
present.
[1]
Hardware Contents:
Package Contents:
[2] [3] [4]
[5] [6] BCUSH SCUSH
1NUTS
HUC22069AM-1
N/A
N/A
N/A
Double Left Arm Assembly
6
Step 2:
1
1
1
[6]
HUC22069AM-1
Step 1:
[1]
[4]
[4]
5mm 10mm
UP
DOWN
1
Place all parts on level, clean, soft surface.
Step 3:
2
Double Left Arm Assembly
7
Step 4:
HUC22069AM-1
Part Description Quantity Re-Order Number
[1] Top Slat 1 FRN-801640-HUC25253AM-1
[2] Slat 2 FRN-801640-HUC25253AM-2
[3] Back Seat Support Bar 1 FRN-801640-HUC25253AM-3
[4] Seat Bottom 1 FRN-801640-HUC25253AM-4
[5] Front Seat Support Bar 1 FRN-801640-HUC25253AM-5
[6] Connector Bar 1 FRN-801640-HUC25253AM-6
[7] Left Arm 1 FRN-801640-HUC25253AM-7
[8] Right Arm 1 FRN-801640-HUC25253AM-8
BCUSH Back Cushion 2 FRN-801640-HUC25253AM-BCUSH
SCUSH Seat Cushion 1 FRN-801640-HUC25253AM-SCUSH
[1]
Package Contents:
[2] [3] [4] [5]
[7] [8] BCUSH SCUSH[6]
Corner Assembly
Part Description Quantity Re-Order Number
1 Bolt M6 x 95 mm & Nuts 4
2 Screw M6 x 65 mm & Nuts 4
3 Screw M6 x 35 mm 4
4 Screw M4 x 15 mm 2
5 Allen Key 4 2
KIT Hardware Kit (Re-order only) 1 FRN-801640-HUC25253AM-KIT
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product. Please lay out all package contents to make sure all pieces are
present.
Hardware Contents:
1NUTS NUTS
4 5
HUC25253AM-1
8
N/A
N/A
N/A
N/A
N/A
Corner Assembly
9
1
[1]
[3]
[5]
[6]
[7]
10mm
5mm
Up
Down
1
1
Step 1:
Place all parts on level, clean, soft surface.
HUC25253AM-1
Step 2:
2
[2]
[8]
2
2
2
4
Corner Assembly
10
Step 3:
3
[4]
HUC25253AM-1
Step 4:
11
Chair Assembly
Part Description Quantity Re-Order Number
1 Bolt M6 x 95 mm & Nuts 6
2 Screw M6 x 35 mm 4
3 Allen Key 4 2
KIT Hardware Kit (Re-order only) 1 FRN-801640-HUC25251AM-KIT
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product. Please lay out all package contents to make sure all pieces are
present.
Hardware Contents:
1NUTS
HUC25251AM-1
Part Description Quantity Re-Order Number
A Top Slat 1 FRN-801640-HUC25251AM-A
B Seat Bottom 1 FRN-801640-HUC25251AM-B
C Slats 2 FRN-801640-HUC25251AM-B
D Back Support Bar 1 FRN-801640-HUC25251AM-D
E Front Support Bar 1 FRN-801640-HUC25251AM-E
F Arms 2 FRN-801640-HUC25251AM-F
BCUSH Back Cushions 1 FRN-801640-HUC25251AM-BCUSH
SCUSH Seat Cushions 1 FRN-801640-HUC25251AM-SCUSH
Package Contents:
A B C D
E F BCUSH SCUSH
N/A
N/A
N/A
Step 1:
Chair Assembly
12
Place all parts on level, clean, soft surface.
HUC25251AM-1
Step 2:
2
13
Armless Chair Assembly
Part Description Quantity Re-Order Number
1 Bolt M6 x 95 mm & Nuts 6
2 Screw M6 x 35 mm 4
3 Allen Key 4 2
KIT Hardware Kit (Re-order only) 1 FRN-801640-HUC22071AM-KIT
Part Description Quantity Re-Order Number
[1] Top Slat 1 FRN-801640-HUC22071AM-A
[2] Legs 2 FRN-801640-HUC22071AM-B
[3] Bottom Slat 3 FRN-801640-HUC22071AM-C
[4] Base 1 FRN-801640-HUC22071AM-D
[5] Slats 2 FRN-801640-HUC22071AM-E
BCUSH Back Cushion 1 FRN-801640-HUC22071AM-BCUSH
SCUSH Seat Cushion 1 FRN-801640-HUC22071AM-SCUSH
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product. Please lay out all package contents to make sure all pieces are
present.
Hardware Contents:
Package Contents:
1NUTS
[1] [2] [3] [4]
[5]
HUC22071AM-1
BCUSH SCUSH
N/A
N/A
N/A
Armless Chair Assembly
14
Step 1:
Step 2:
Place all parts on level, clean, soft surface.
1[1]
[3]
[3]
10mm
5mm
UP
DOWN
1
1
1
[5]
HUC22071AM-1
Armless Chair Assembly
15
Mid Table Assembly
Part Description Quantity Re-Order Number
1 Bolt M6 x 95 mm & Nuts 4
2 Screw M6 x 70 mm 8
3 Allen Key 4 2
KIT Hardware Kit (Re-order only) 1 FRN-801640-HUC37135-KIT
Part Description Quantity Re-Order Number
ATable Top 1
B Legs 2
C Brace Rail 2 FRN-801640-HUC37135-C
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product. Please lay out all package contents to make sure all pieces are
present.
Hardware Contents:
Package Contents:
1
1
NUTS
2
Step 3:
HUC22071AM-1
HUC37135-1
N/A
N/A
N/A
N/A
N/A
Step 1:
Step 2:
Mid Table Assembly
16
Place all parts on level, clean, soft surface.
HUC37135-1
Bench Assembly
Assembly
17
Part Description Quantity Re-Order Number
1 Bolt M6 x 95 mm & Nuts 4
2 Screw M6 x 70 mm 8
3 Allen Key 4 2
KIT Hardware Kit (Re-order only) 1 FRN-801640-HUC23800-KIT
Part Description Quantity Re-Order Number
A Bench Seat 1
B Legs 2
C Brace Rail 2 FRN-801640-HUC23800-C
BENCUSH Bench Cushion 1 FRN-801640-HUC23800-BENCUSH
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product. Please lay out all package contents to make sure all pieces are
present.
Hardware Contents:
Package Contents:
1
1
NUTS
Step 1:
Place all parts on level, clean, soft surface.
HUC23800-1
BENCUSH
N/A
N/A
N/A
N/A
N/A
Bench Assembly
18
Step 2:
Step 3:
HUC23800-1
Wood Maintenance (Eucalyptus)
19
EUCALYPTUS CARE AND MAINTENANCE
READ CAREFULLY: SURFACE PREPARATION.
•STEP 1. After the product is assembled and before oil treatment, thoroughly
wipe clean your furniture underneath and on top, remove all dirt and sawdust parti-
cles from all mortise joints and grooves using a brush and rag.
•STEP 2. OILING: We recommend the furniture to be completely covered and
sealed underneath and on top with a light coat of hardwood timber oil preservative,
making sure the oil penetrates into all grooves and mortise joints.
•STEP 3. IMPORTANT. After oiling wipe off excess oil, then allow the oil to dry in
the shade away from direct sunlight. Wipe off again with a clean rag removing any
excess oil that may not have penetrated into the timber. Repeat wiping off excess
oil if necessary.
•STEP 4. REPEAT THE ABOVE PROCEDURE IN 48HRS. Sanding is not required
between these initial coats. Your furniture is now protected however repeat appli-
cations of the hardwood timber oil may be required. Before re- oiling check your
furniture for any residue build up, if this occurs a light sanding may be required.
Note: The frequency of oiling will vary according to the climatic conditions in your
area and direct exposure to the elements your furniture is subjected to.
NOTE: If Eucalyptus furniture is neglected with prolonged unprotected exposure to
the elements this will cause the timber to discolor to a silvery grey, checking and
hairline cracks may appear if in the event your setting does discolor to restore the
timber, sanding and oiling will be required. We recommend the furniture be stored
with undercover protection during wintertime and wet season.
NOTE: WET TIMBER MUST BE DRIED FOR 3-5 DAYS BEFORE OILING. DO NOT
OIL THE FURNITURE LATE IN THE DAY WHEN DEW OR CONDENSATION IS LIKE-
LY TO FORM OR WHEN RAIN IS THREATENING. NOTE: ALL TIMBER FURNITURE
GOES THROUGH A SETTLING IN PERIOD, FASTENERS MUST BE TIGHTENED
REGULARLY. DO NOT LEAVE FASTENERS UNTIGHTENED THIS COULD CAUSE
FURNITURE DAMAGE.
Eucalyptus timber is kiln dried under strict guidelines. Upon purchasing your
furniture small hairline cracks may appear, this is part of the drying process of this
particular timber species, these cracks will not deter the durability of the furniture,
up to 3% shrinkage may occur in this species of timber.
WARNING: Staining on Tuscan or light colored pavers may occur from
sap leaching and dust particles if the timber is not cleaned properly and
weathered correctly, hose down your furniture and clean thoroughly
before placing your furniture on light colored pavers.
The key to longevity of your new furniture is maintenance, regular cleaning and
factors such as location furniture is situated, sun, salt, dust, moisture & pollution.
All of these factors can wear down the look of your furniture. Please follow
instruction below which can extend the look and period of use for your furniture.
During winter or raining season storage, store in the cool well-ventilated area,
to help prevent excessive shrinkage or expansion of timber depending on the
amount of humidity. When making repairs ensure the area is prepared properly.
Clean the damaged area from all dirt & dust. Shake paint container and then ap-
ply with required brush. Depending on the size of damaged area, wait 6-12 hours
before using furniture. To reduce maintenance, a furniture cover is recommended.
CLEANING
• To clean painted furniture frame, simple wash it with soapy water using a soft
cloth or a soft non-metallic brush. Then rinse off the furniture and dry with soft
clean cloth.
• Timetable will depend on location but rule of thumb is once a month for
external area and two to three times a year for fully protected furniture.
CUSHION CARE
• Please keep cushions dry, vacuum regularly, and avoid leaving in direct sun-
light for long periods of time.
• Spot clean the affected area using mild soapy and water with a soft cloth
sponge. Once clean rinse with clean water and pat dry with a soft cloth. Ensure
lling has dried out before use.
• Do not use solvents; do not dry clean or machine wash. For stubborn stains
commercial fabric cleaners are available.
• Please review application instructions on product before using on your cushions.
• You may use a steam cleaner applicator but ensure cushion cover remain on
insert and to use gentle setting on appliance.
Furniture Care and Maintenance
20
Warnings and Cautions
DANGER: Keep children out of
unpacking area.
CAUTION: Use furniture on flat
surface only.
CAUTION: DO NOT place hot objects directly on the
wood surface to prevent damage to the wood.
CAUTION: DO NOT use pressure
cleaning machines when cleaning
your furniture or you will damage the
structure of the wood.
WARNING: Do not stand on chair or bench.
Do not sit on table.
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Atleisure FRN-801670 User manual
-
Atleisure FRN-801684 User manual
-
Atleisure FRN-801680 User manual
-
Atleisure FRN-801685 User manual
-
Atleisure FRN-801685 User manual
-
Atleisure FRN-008412BS User manual
-
Atleisure FRN-801672 User manual
-
Atleisure FRN-801681 User manual
-
Atleisure FRN-913040 User manual
-
Atleisure FRN-008412BS User manual
