Atleisure FRN-801681 User manual

Type
User manual
Harper Bar Table
Assembly & Care Instructions
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
Item: HUC37549
Model: FRN-801684 / Set: FRN-801681
ATLeisure, LLC
US Toll Free: 1-855-880-7205 (English)
8am - 5pm, Monday through Friday, Eastern Time
Email: customerser[email protected]
or visit our website at www.atleisure.com
Please Contact ATLeisure Customer Service
Prior to Returning to Store
For assistance with use, parts,
or customer service please contact:
For outdoor residential household use only.
Not for commercial use.
Designed in USA
Made in Vietnam
C105972
Woodfromwell-
managedforests
100%
Contents
Bar Table Assembly HUC37549
Part Description Quantity Re-Order Number
ATable Top 1
B Frame Legs 2
C Top Crossbars 2 FRN-801684-HUC37549-C
D Bottom Crossbar 1
Part Description Quantity Re-Order Number
1 Bolt M6 x 90 mm & Nuts 8
2 Bolt M6 x 70 mm & Nuts 4
3 Screw M6 x 80 mm 10
4 Allen Key 4 2
KIT Hardware Kit (Re-order only) 1 FRN-801684-HUC37549-KIT
Contents
Bar Table Assembly
Hardware Contents
Package Contents
Assembly
Wood Maintenance
Furniture Care and Maintenance
Warnings and Cautions
Warranty
2
2-3
2
2
3
4
5
5
6
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product. Please lay out all package contents to make sure all pieces are
present.
2
A
4
1 NUTSNUTS 2
3
Hardware Contents:
Package Contents:
BC D
1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
HUC37549
Bar Table Assembly
3
Step 1:
Step 2:
Place all parts on level, clean, soft surface.
1
1
2
B
C
D
1
1
C
D
2
B
A
C
B
3
4
Wood Maintenance (Acacia)
ACACIA CARE AND MAINTENANCE
READ CAREFULLY: SURFACE PREPARATION.
STEP 1. After the product is assembled and before oil treatment, thoroughly wipe
clean your furniture underneath and on top, remove all dirt and sawdust particles
from all mortise joints and grooves using a brush and rag.
• STEP 2. OILING: We recommend the furniture to be completely covered and
sealed underneath and on top with a light coat of hardwood timber oil preservative,
making sure the oil penetrates into all grooves and mortise joints.
• STEP 3. IMPORTANT. After oiling wipe off excess oil, then allow the oil to dry in
the shade away from direct sunlight. Wipe off again with a clean rag removing any
excess oil that may not have penetrated into the timber. Repeat wiping off excess
oil if necessary.
• STEP 4. REPEAT THE ABOVE PROCEDURE IN 48HRS. Sanding is not required
between these initial coats. Your furniture is now protected however repeat appli-
cations of the hardwood timber oil may be required. Before re-oiling check your
furniture for any residue build up. If this occurs a light sanding may be required.
Note: The frequency of oiling will vary according to the climatic conditions in your
area and direct exposure to the elements your furniture is subjected to.
NOTE: If Acacia furniture is neglected with prolonged unprotected exposure to the
elements this will cause the timber to discolor to a silvery grey, checking and hair-
line cracks may appear. If your setting does discolor to restore the timber, sanding
and oiling will be required. We recommend the furniture be stored with undercover
protection during wintertime and wet season.
NOTE: WET TIMBER MUST BE DRIED FOR 3-5 DAYS BEFORE OILING. DO NOT
OIL THE FURNITURE LATE IN THE DAY WHEN DEW OR CONDENSATION IS LIKE-
LY TO FORM OR WHEN RAIN IS THREATENING. NOTE: ALL TIMBER FURNITURE
GOES THROUGH A SETTLING IN PERIOD, FASTENERS MUST BE TIGHTENED
REGULARLY. DO NOT LEAVE FASTENERS UNTIGHTENED AS THIS COULD CAUSE
FURNITURE DAMAGE.
Acacia timber is kiln dried under strict guidelines. Upon purchasing your furniture
small hairline cracks may appear. This is part of the drying process of this particular
timber species and these cracks will not affect the durability of the furniture. Up to
3% shrinkage may occur in this species of timber.
WARNING: Staining on Tuscan or light colored pavers may occur from
sap leaching and dust particles if the timber is not cleaned properly and
weathered correctly, hose down your furniture and clean thoroughly
before placing your furniture on light colored pavers.
The key to longevity of your new furniture is maintenance, regular cleaning and
factors such as location furniture is situated, sun, salt, dust, moisture & pollution.
All of these factors can wear down the look of your furniture. Please follow
instruction below which can extend the look and period of use for your furniture.
During winter or raining season storage, store in the cool well-ventilated area,
to help prevent excessive shrinkage or expansion of timber depending on the
amount of humidity. When making repairs ensure the area is prepared properly.
Clean the damaged area from all dirt & dust. Shake paint container and then ap-
ply with required brush. Depending on the size of damaged area, wait 6-12 hours
before using furniture. To reduce maintenance, a furniture cover is recommended.
CLEANING
To clean painted furniture frame, simple wash it with soapy water using a soft
cloth or a soft non-metallic brush. Then rinse off the furniture and dry with soft
clean cloth.
Timetable will depend on location but rule of thumb is once a month for
external area and two to three times a year for fully protected furniture.
CUSHION CARE
Please keep cushions dry, vacuum regularly, and avoid leaving in direct sun-
light for long periods of time.
Spot clean the affected area using mild soapy and water with a soft cloth
sponge. Once clean rinse with clean water and pat dry with a soft cloth. Ensure
lling has dried out before use.
Do not use solvents; do not dry clean or machine wash. For stubborn stains
commercial fabric cleaners are available.
Please review application instructions on product before using on your cushions.
You may use a steam cleaner applicator but ensure cushion cover remain on
insert and to use gentle setting on appliance.
Furniture Care and Maintenance
5
Warnings and Cautions
DANGER: Keep children out of
unpacking area.
CAUTION: Use furniture on flat
surface only.
CAUTION: DO NOT place hot objects directly on the
wood surface to prevent damage to the wood.
CAUTION: DO NOT use pressure
cleaning machines when cleaning
your furniture or you will damage the
structure of the wood.
WARNING: Do not stand on table. Do not sit
on table.
Warranty
LIMITED WARRANTY
The warranties in this document give specific rights to the pur haser. These rights
are in addition to those implied by law. Nothing in this warranty document is intended
to exclude, modify or restrict rights which the purchaser may have under the Com-
petition and Consumer Act 2010 or any other legislation which may not be excluded,
modified or restricted by an agreement.
WARRANTY CONDITIONS
WARRANTY TERM: ONE (1) YEAR-TIMBER, FABRIC AND FOAM
1. Satisfactory proof of the purchase date must be furnished at the time of notification
of the defect for a claim under this warranty to be enforceable. For Warranties to be
honored, a copy of purchase receipt must be shown upon request. In various cases
ATLeisure may require product inspection, on-site inspection and or photographic
evidence Photographic evidence and purchase receipt copies must be emailed to
customerser[email protected] before any replacement or refund can considered for
approval.
2. This warranty covers all parts found to be defective in workmanship and/or materials
during the warranty period and will be repaired or replaced at the discretion of the
manufacturer at no cost to the purchaser.
3.This warranty will be void and accordingly no claim of any nature will be enforceable
if the product has not been assembled, installed or operated according to the instruc-
tions, or has been subject to abuse, improperly treated, neglected, misused and/or if
any repairs, maintenance or service has been done by an unauthorized person.
4. This warranty does not cover Natural timber characteristics such as timber knots,
hairline grain checking, shrinkage and defects caused by mishandling and misuse of
the products, fastening defects caused by the failure to maintain the product in ac-
cordance with the care and maintenance instructions and defects caused by transpor-
tation cartage. Failure to comply with these instructions will render the warranty null
and void.
5. Transportation for replacement product will rests solely at the discretion of ATLei-
sure.
6. This warranty does not cover commercial use.
7. Our goods come with guarantees that cannot be excluded under the Australian Con-
sumer Law. You are entitled to a replacement or refund for a major failure and com-
pensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
Atleisure, LLC
Customer Service Dept.
1040 Boulevard SE, Ste. B
Atlanta, GA 30312 USA
6
ATLeisure, LLC
1040 Boulevard SE, Suite B
Atlanta, Georgia 30312, USA
US Customer Service Toll Free 1-855-880-7205
8am - 5pm Eastern Time, Monday through Friday
www.atleisure.com
Harper Bar Stool
Assembly & Care Instructions
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
Item: HUC39002
Model: FRN-801685 / Set: FRN-801681
ATLeisure, LLC
US Toll Free: 1-855-880-7205 (English)
8am - 5pm, Monday through Friday, Eastern Time
Email: customerser[email protected]
or visit our website at www.atleisure.com
Please Contact ATLeisure Customer Service
Prior to Returning to Store
For assistance with use, parts,
or customer service please contact:
For outdoor residential household use only.
Not for commercial use.
Designed in USA
Made in Vietnam
C105972
Woodfromwell-
managedforests
100%
Contents
Contents
Bar Stool Assembly
Hardware Contents
Package Contents
Assembly
Wood Maintenance
Furniture Care and Maintenance
Warnings and Cautions
Warranty
2
2-3
2
2
3
4
5
5
6
2
Bar Stool Assembly HUC39002
Part Description Quantity Re-Order Number
1 Screw M6 x 80 mm & Nuts 8
2 Screw M6 x 60 mm 8
KIT Hardware Kit (Re-order only) 1 FRN-801685-HUC39002-KIT
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product. Please lay out all package contents to make sure all pieces are
present.
1NUTS 2
Hardware Contents:
Part Description Quantity Re-Order Number
A Base 1 FRN-801685-HUC39002-A
B Frame Legs 2 FRN-801685-HUC39002-B
C Crossbars 2 FRN-801685-HUC39002-C
CUSH Cushion 1 FRN-801685-HUC39002-CUSH
A
Package Contents:
BCSCUSH
N/A
N/A
Bar Stool Assembly
3
Step 1:
Place all parts on level, clean, soft surface.
HUC39002
1
B
A
1
A
B
B
C
1
1
1
1
4
Wood Maintenance (Acacia)
ACACIA CARE AND MAINTENANCE
READ CAREFULLY: SURFACE PREPARATION.
STEP 1. After the product is assembled and before oil treatment, thoroughly wipe
clean your furniture underneath and on top, remove all dirt and sawdust particles
from all mortise joints and grooves using a brush and rag.
• STEP 2. OILING: We recommend the furniture to be completely covered and
sealed underneath and on top with a light coat of hardwood timber oil preservative,
making sure the oil penetrates into all grooves and mortise joints.
• STEP 3. IMPORTANT. After oiling wipe off excess oil, then allow the oil to dry in
the shade away from direct sunlight. Wipe off again with a clean rag removing any
excess oil that may not have penetrated into the timber. Repeat wiping off excess
oil if necessary.
• STEP 4. REPEAT THE ABOVE PROCEDURE IN 48HRS. Sanding is not required
between these initial coats. Your furniture is now protected however repeat appli-
cations of the hardwood timber oil may be required. Before re-oiling check your
furniture for any residue build up. If this occurs a light sanding may be required.
Note: The frequency of oiling will vary according to the climatic conditions in your
area and direct exposure to the elements your furniture is subjected to.
NOTE: If Acacia furniture is neglected with prolonged unprotected exposure to the
elements this will cause the timber to discolor to a silvery grey, checking and hair-
line cracks may appear. If your setting does discolor to restore the timber, sanding
and oiling will be required. We recommend the furniture be stored with undercover
protection during wintertime and wet season.
NOTE: WET TIMBER MUST BE DRIED FOR 3-5 DAYS BEFORE OILING. DO NOT
OIL THE FURNITURE LATE IN THE DAY WHEN DEW OR CONDENSATION IS LIKE-
LY TO FORM OR WHEN RAIN IS THREATENING. NOTE: ALL TIMBER FURNITURE
GOES THROUGH A SETTLING IN PERIOD, FASTENERS MUST BE TIGHTENED
REGULARLY. DO NOT LEAVE FASTENERS UNTIGHTENED AS THIS COULD CAUSE
FURNITURE DAMAGE.
Acacia timber is kiln dried under strict guidelines. Upon purchasing your furniture
small hairline cracks may appear. This is part of the drying process of this particular
timber species and these cracks will not affect the durability of the furniture. Up to
3% shrinkage may occur in this species of timber.
WARNING: Staining on Tuscan or light colored pavers may occur from
sap leaching and dust particles if the timber is not cleaned properly and
weathered correctly, hose down your furniture and clean thoroughly
before placing your furniture on light colored pavers.
The key to longevity of your new furniture is maintenance, regular cleaning and
factors such as location furniture is situated, sun, salt, dust, moisture & pollution.
All of these factors can wear down the look of your furniture. Please follow
instruction below which can extend the look and period of use for your furniture.
During winter or raining season storage, store in the cool well-ventilated area,
to help prevent excessive shrinkage or expansion of timber depending on the
amount of humidity. When making repairs ensure the area is prepared properly.
Clean the damaged area from all dirt & dust. Shake paint container and then ap-
ply with required brush. Depending on the size of damaged area, wait 6-12 hours
before using furniture. To reduce maintenance, a furniture cover is recommended.
CLEANING
To clean painted furniture frame, simple wash it with soapy water using a soft
cloth or a soft non-metallic brush. Then rinse off the furniture and dry with soft
clean cloth.
Timetable will depend on location but rule of thumb is once a month for
external area and two to three times a year for fully protected furniture.
CUSHION CARE
Please keep cushions dry, vacuum regularly, and avoid leaving in direct sun-
light for long periods of time.
Spot clean the affected area using mild soapy and water with a soft cloth
sponge. Once clean rinse with clean water and pat dry with a soft cloth. Ensure
lling has dried out before use.
Do not use solvents; do not dry clean or machine wash. For stubborn stains
commercial fabric cleaners are available.
Please review application instructions on product before using on your cushions.
You may use a steam cleaner applicator but ensure cushion cover remain on
insert and to use gentle setting on appliance.
Furniture Care and Maintenance
5
Warnings and Cautions
DANGER: Keep children out of
unpacking area.
CAUTION: Use furniture on flat
surface only.
CAUTION: DO NOT place hot objects directly on the
wood surface to prevent damage to the wood.
CAUTION: DO NOT use pressure
cleaning machines when cleaning
your furniture or you will damage the
structure of the wood.
WARNING: Do not stand on chair.
Warranty
LIMITED WARRANTY
The warranties in this document give specific rights to the pur haser. These rights
are in addition to those implied by law. Nothing in this warranty document is intended
to exclude, modify or restrict rights which the purchaser may have under the Com-
petition and Consumer Act 2010 or any other legislation which may not be excluded,
modified or restricted by an agreement.
WARRANTY CONDITIONS
WARRANTY TERM: ONE (1) YEAR-TIMBER, FABRIC AND FOAM
1. Satisfactory proof of the purchase date must be furnished at the time of notification
of the defect for a claim under this warranty to be enforceable. For Warranties to be
honored, a copy of purchase receipt must be shown upon request. In various cases
ATLeisure may require product inspection, on-site inspection and or photographic
evidence Photographic evidence and purchase receipt copies must be emailed to
customerser[email protected] before any replacement or refund can considered for
approval.
2. This warranty covers all parts found to be defective in workmanship and/or materials
during the warranty period and will be repaired or replaced at the discretion of the
manufacturer at no cost to the purchaser.
3.This warranty will be void and accordingly no claim of any nature will be enforceable
if the product has not been assembled, installed or operated according to the instruc-
tions, or has been subject to abuse, improperly treated, neglected, misused and/or if
any repairs, maintenance or service has been done by an unauthorized person.
4. This warranty does not cover Natural timber characteristics such as timber knots,
hairline grain checking, shrinkage and defects caused by mishandling and misuse of
the products, fastening defects caused by the failure to maintain the product in ac-
cordance with the care and maintenance instructions and defects caused by transpor-
tation cartage. Failure to comply with these instructions will render the warranty null
and void.
5. Transportation for replacement product will rests solely at the discretion of ATLei-
sure.
6. This warranty does not cover commercial use.
7. Our goods come with guarantees that cannot be excluded under the Australian Con-
sumer Law. You are entitled to a replacement or refund for a major failure and com-
pensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
Atleisure, LLC
Customer Service Dept.
1040 Boulevard SE, Ste. B
Atlanta, GA 30312 USA
6
ATLeisure, LLC
1040 Boulevard SE, Suite B
Atlanta, Georgia 30312, USA
US Customer Service Toll Free 1-855-880-7205
8am - 5pm Eastern Time, Monday through Friday
www.atleisure.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Atleisure FRN-801681 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI