Atleisure FRN-913040 User manual

Brand: Atleisure

Model: FRN-913040

Type: User manual

3 PC Rocking Bistro Set

Assembly & Care Instructions

IMPORTANT : RETAIN FOR FUTURE REFERENCE

READ CAREFULLY

SKU #: 272 1917

Model #: FRN-913040

ATLeisure, LLC

Toll Free: 1-855-880-7205 (English is offered)

8am - 5pm, Monday through Friday, Eastern Standard Time

Email: customerser[email protected] or visit our website at www.atleisure.com

DO NOT RETURN TO STORE

2021 Distributed by Menard, Inc., Eau Claire, WI 54703

Made in China

The schematics in this manual are for assembly and operation illustration only.

They may differ from the actual appearance.

For assistance with assembly, parts, or customer service, please contact:

Contents

Glass Table Package Contents ...................2

Preparation ...............................2

Hardware Contents ........................3

Assembly ...............................3-4

Rocking Chair Package Contents .................5

Preparation ...............................5

Hardware Contents ........................5

Assembly ...............................6-8

Warranty ...................................9

Care and Maintenance .........................9

Warnings and Cautions ........................9

Replacement Parts ..........................10

Glass Table Package Contents

Part Description Quantity

AGlass Table Top 1

BLeg 4

C Leg Brace 1

Preparation

CAUTION: Do not use sharp tools to remove the protective material, as it may

damage the product.

Before assembling make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not

attempt to assemble the product. Contact our customer service representative for

assembly assistance or questions toll free at 1-855-880-7205.

Estimated Assembly Time: 10 minutes

Tools required for Assembly: No tools required

A B C

Hardware Contents

Part Description Quantity

AA Bolt (M6*42) 4

BB Washer 8

CC Screw Nut 4

DD Hex Key 1

EE Wrench 1

AA BB CC DD EE

Assembly

Step 1: Be careful to place the glass table top (A) upside down on a soft, ﬂat

surface. Insert the end of table legs (B) into the plastic hole of the table top.

Assembly (continued)

Step 2: Align the leg brace (C) holes with the corresponding table leg (B)

holes. Place a washer (BB) over the holes and insert the bolts (AA) to attach the

frame from the outside of the table legs (B). Use the hex key (DD) to screw in

the bolts (AA) and the wrench (EE) to screw in the screw nut (CC). Do not over

tighten. Finally, use the hex key (DD) and the wrench (EE) to tighten all bolts

and nuts.

Step 3: Turn the table over . Place the table on a level surface. The table is

now ready for use.

Rocking Chair Package Contents

Part Description Quantity

DRight Arm 2

ELeft Arm 2

F Seat & Back 2

G Front Connect Bar 2

H Bottom Leg Bar 2

DE F G H

Preparation

CAUTION: Do not use sharp tools to remove the protective material, as it may

damage the product.

Before assembling make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not

attempt to assemble the product. Contact our customer service representative for

assembly assistance or questions toll free at 1-855-880-7205.

Estimated Assembly Time: 30 minutes

Tools required for Assembly: No tools required

Hardware Contents

Part Description Quantity

FF Short Bolt (M6*20) 12

GG Long Bolt (M6*30) 8

HH Washer 16

JJ Hex Key 1

FF GG HH JJ

Assembly

Step 1: Place the contents on a soft, ﬂat surface. Align the bottom leg bar (H)

hole with the right and left arm (D and E) as shown in the image above. Use the

hex key (JJ) to tighten the short bolts (FF), being careful not to over tighten.

Step 2: Align the front connect bar (G) with the right and left arms (D and E).

Insert the short bolts (FF) through the washers (HH) into the holes. Use the hex

key (JJ) to tighten the bolts, being careful not to over tighten.

HH FF

Assembly (continued)

Step 3: Unfold the seat and back (F). Align the chair back with the holes on both

arms. Insert the long bolts (GG) through the washers (HH) and into the holes. Use

the hex key (JJ) to tighten the bolts, being careful not to over tighten.

Step 4: Lay the chair on its side. Align one side of the chair seat with the hole

of one arm (D or E). Insert the long bolt (GG) through the washers (HH) into the

hole. Use the hex key (JJ) to tighten the bolts, being careful not to over tighten.

Assembly (continued)

Step 5: Align the other side of the chair seat with the hole of the other arm (D

or E). Insert the long bolt (GG) through the washers (HH) into the hole. Finally,

use the hex key (JJ) to tighten the all bolts. Repeat assembly steps for the

second chair.

Step 6: Place the chairs and table on a level surface. The chairs and table are

now ready for use. Double check that all the bolts are fully tightened before

using.

Warranty

ONE YEAR WARRANTY

This product is covered under a manufacturer’s one year warranty from date of

purchase against defects in materials and workmanship. This warranty does not

cover damage due to neglect, abuse or weather related damage. For full warranty

disclosure, email us at customerser[email protected], call toll free at 1-855-880-

7205 or send mail to: 1040 Boulevard SE Ste. B, Atlanta GA 30312

NOT COVERED UNDER WARRANTY

This Warranty excludes the following: general frame rusting; glass breakage; acts of

nature (i.e. wind, ﬁre, or freeze); damage caused by improper assembly, accident,

disaster, misuse, abuse, negligence and commercial use; discoloration or fading of

the ﬁnish or fabric as a result of exposure to the elements.

HOW TO FILE A CLAIM

If you are within your warranty you must have your receipt and pictures of your in-

formation to send to ATLeisure at [email protected], or send by mail

to 1040 Boulevard SE Ste. B, Atlanta GA 30312. This warranty gives you speciﬁc

legal rights, and you may also have other rights which vary from state to state.

Care and Maintenance

• Use mild soap and warm water to clean the frames.

• Rinse with clean water and dry thoroughly.

• Be sure to drain any water accumulated inside the frames. To thoroughly

drain frames, remove foot caps and tilt frames, if necessary, to remove all

water. Water allowed to accumulate inside the frames and then exposed to

sub-freezing temperatures can cause damage to frame tubing. Such damage is

not covered under warranty.

• Any rust spots should be lightly sanded and treated with rust inhibitor and

followed with an application of touch-up paint (not included).

Warnings and Cautions

DANGER: Keep children out of the assembly area during

assembly.

WARNING: Do not stand on table or chairs. Do not sit on

table.

CAUTION: Use table and chair on at ground only.

CAUTION: Excessive rocking motion could cause tipping

or injury.

IMPORTANT: Check the tightness of bolts at least every 90 days.

Replacement Parts

For replacement parts, call our customer service department at 1-855-880-7205,

8:00am-5:00pm., EST, Monday-Friday.

Part Description Quantity Part Number

B Table Leg 4 FRN-913040T-B

C Table Leg Brace 1 FRN-913040T-C

KIT Hardware Kit (table) 1 FRN-913040T-KIT

DRight Arm 2 FRN-913040C-AA

ELeft Arm 2 FRN-913040C-BB

F Seat & Back 2 FRN-913040C-CC

G Front Connect Bar 2 FRN-913040C-DD

H Bottom Leg Bar 2 FRN-913040C-EE

KIT Hardware Kit (chair) 1 FRN-913040C-KIT

B C

Hardware Kit (table)

Hardware Kit (chair)

DE F G H

ATLeisure, LLC

1040 Boulevard SE, Suite B

Atlanta, Georgia 30312, USA

Customer Service Toll Free 1-855-880-7205

8am - 5pm Eastern Time, Monday through Friday

www.atleisure.com

2021 Distributed by Menard, Inc., Eau Claire, WI 54703

Made in China

Atleisure FRN-913040 User manual

Brand: Atleisure

Model: FRN-913040

Type: User manual

Download PDF

report

Atleisure FRN-913040 User manual

Atleisure FRN-913040 User manual

Related papers

Other documents