DO NOT OPERATE THIS FAN IN WET OR DAMP AREARS SUCH AS THE
BATHROOM
THIS FAN IS INTENDED FOR INDOOR USE ONLY
DO NOT LOCATE THE FAN NEAR LOOSE OBJECTS, SUCH AS CURTAINS
Assembling the Fan Base:
When putting the base of the fan together, use gentle force to click the two parts in place
and then secure with screws provided
.
Safety Matters:
Please ensure that the input voltage is consistent before use. (220V-50Hz) *
Before connecting the plug to the power supply, please ensure that your hands are dry to
avoid electric shock.
Before connecting the power supply, ensure that the fan module is properly installed.
Please place the product on a safe and level surface.
When using near children, please take special care of children to avoid accidents.
Please do not block any objects into/out of the air.
Do not put fingers, other body parts or sundries into the air inlet/outlet to avoid injury
and damage to the product
Place the power cord securely to prevent tripping.
Handle the power cord carefully to prevent damage to the power cord by other objects,
such as the legs of the chair
When the fan is rotating, do not forcibly stop the rotation of the fan, so as not to
damage the parts.
It is recommended to use a separate socket for fan operation and not overload use on
an extension cable.
If the power cord is found to be damaged or unsafe, please do not operate the fan. First
find qualified personnel to replace or send the product to customer service for repair,
inspection or even immersion.
Please do not touch the power cord, plug, or any part of the product with water.