Press the ‘+’ on the
dashboard and follow the
steps to set up your tag.
Log in with your Telstra ID
and set up your prole.
Download the Telstra Locator
app to your iOS or Android
smartphone.
TIP: When connecting your CAT M1 tag, you
must be located within LTE-M Coverage on the
Telstra IoT Network
The battery life of your Cat-M1 Tag depends
on use.
For more info on how the Cat-M1 Tag works visit:
To charge, connect the cable into the tag and plug the other
end into a USB power source. The light on the top of the
tag will start to ash white to indicate that charging has
commenced.
Depending on the power source it should take around 2
hours to fully charge.
When charging has completed the light will remain solid
white.
From time to time as required, your tag will receive the
latest software updates when located within LTE-M
coverage on Telstra’s IoT Network
Data charges may apply to download and use the Telstra Locator App.
Check coverage at
https://www.telstra.com.au/business-enterprise/solutions/internet-of-things/iot-coverage
/
